MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
CANpro/104-Plus Opto
PC/104-Plus CAN Controller
Connect Tech’s CANpro/104-Plus Opto offers two powerful NXP SJA1000 CAN controllers and 3kV optical isolation to provide maximum protection for your industrial control applications.
An extension of Connect Tech’s current CAN controller product line, CANpro/104-Plus Opto is based on a PC/104-Plus bus. The design frees up valuable I/O space offering you greater flexibility within your embedded system. For even more I/O, CANpro/104-Plus Opto includes an 8-bit GPIO header.
Dependability, high data rates, network control capabilities and 3kV optical isolation protection make CANpro/104-Plus Opto the ideal choice for industrial control applications that are exposed to harsh conditions or environments.
Xtreme/104-Plus
PC/104-Plus Serial Card
High performance and versatility are trademarks of the Xtreme/104 PC/104 serial card family. Now the Xtreme/104-Plus offers more choice for your embedded applications requiring a small footprint, but fast data transfer rates. The Xtreme/104-Plus is available with 4 or 8 high speed asynchronous RS-232/422/485 ports, 8 selectable RS-232/422/485/TTL ports, or choose 2 or 4 dedicated RS-423 ports.
High performance UARTs provide each port with large data buffering capabilities, and each port on the switchable models can be configured for electrical interface, baud rate, parity, data and stop bits independently. The Xtreme/104-Plus is the perfect combination of flexibility, high performance and cost-effectiveness.
CANpro/104 Opto
PC/104 CAN Controller
Connect Tech CANpro/104 Opto combines the power of two NXP SJA1000 CAN controllers with the compact size and rugged stability of PC/104.
This CAN controller card features fail-safe power-up/power-down and on-board high input impendence transceivers to maximize nodes on the bus. Jumperable slew rate limiting reduces radiated emissions. 3kV of optical and power isolation ensure your data is protected from disruptions that can occur with exposure to harsh conditions or environments.
Dependability, high data rates and network control capabilities make CANpro/104 Opto ideal for industrial control applications.
All Connect Tech PC/104 CAN Controller cards include lifetime warranty and free technical support.
PCI to PC/104-Plus Adapter
Passive extender card
This passive extender card allows developers to mount a PCI-104 or PC/104-Plus card into a Universal PCI bus system. The adapter is equipped with a stack-through connector so the test card can be installed on either side (model ADG001), enabling probing on the front or the back. The design also allows cables to exit from the host PC for easy connection to external devices.
PCI Dump Switch Card
This handy development tool will pay for itself the first time you push the button. It is essential hardware for the system of every developer working on programs such as device drivers or interrupt handlers.
When a system freezes during software programming and testing, a hardware reset results in the loss of crucial system information, along with valuable development time. The Universal PCI Dump Switch card increases your productivity by eliminating the guess work normally required to debug the cause of the system hang. It includes an exterior push button to trigger a Non-Maskable Interrupt (NMI), which will enable a crash dump, or drop you into your operating systems debugger.
With this card, a software debugger can troubleshoot events even when the bug causes a complete lock of the operating system. (The PCI Dump Card does not reset the host computer.)
Echo/ISA
Serial Communications Adapter
The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each port’s baud rate, parity, data and stop bits, and supports the most popular operating systems.
U100P-X3
Single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation
The Kvaser U100P-X3 is a robust, single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation (Tested according EN 60335) that squarely addresses the needs of the evolving automotive development market.
Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this is the first in a new range of interfaces that is also suited to rugged applications in marine, industrial, heavy duty vehicle and heavy industries.
The Kvaser U100P is also available with 9-pin D-SUB, J1939 or M12 CAN connectors.
U100-X3
Single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation
The Kvaser U100-X3 is a robust, galvanically-reinforced (Tested according EN 60335) single-channel CAN/CAN FD to USB interface with a 16-pin OBDII plug.
Signal and power isolated, the Kvaser U100 offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that meets the needs of CAN system developers through to service technicians.
With an intelligent LED that displays bus loads and error frames, an industry-leading IP67 rating and an innovative connector system, the U100 has numerous stand-out features. Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this suits rugged and higher voltage applications in marine, industrial, construction, heavy-duty, agriculture and automotive, including electric vehicle markets.
The Kvaser U100 is also available with 9-pin D-SUB, J1939-13 Type II or M12 CAN connectors.
DIN Rail SE410S-X10
Ethernet to CAN/CAN FD interface for DIN Rail mounting
Kvaser DIN Rail SE410S-X10 is a powerful Ethernet to CAN/CAN FD interface with support for Kvaser t programs. It has 4 CAN/CAN FD channels, support for I/O via add-on modules and 16GB flash storage. Kvaser DIN Rail SE410S-X10 acts as a master for the add-ons. The housing has a smart mounting clip that attaches to a DIN rail for easy installation.
The communication between the I/O modules and the Kvaser DIN Rail SE410S-X10 uses an optical bus, thus there is no need for cables in between. The I/O modules can be controlled either from Kvaser’s CANlib SDK (over Ethernet) or directly on the unit using Kvaser t programs. The Kvaser DIN Rail SE410S-X10 is compatible with applications that use Kvaser’s CANlib SDK.
MACH-ETH
A flexible interface for Ethernet, CAN(/FD) and LIN bus with user-scripting and I/O
The MACH-ETH is an automotive network interface that features one Ethernet port, two CAN FD channels, a LIN channel, a USB and RS-232 port, and multiple I/Os.
The device can act as an Ethernet-CAN(/FD) or Ethernet-LIN interface as well as CAN(/FD)-LIN gateway, and a user-scripting feature allows to run user applications directly on the device. The open communication protocol enables access to interface’s channels over Ethernet or USB.
The communication protocol over Ethernet or USB enables access to CAN(/FD) and LIN bus channels over Ethernet or virtual COM port respectively.
A user-scripting feature, which allows to run user applications directly on the MCU, can be used for HiL testing and rest-bus simulations. The device can act as an interface, a gateway, or bridge between all its channels.
An analogue input and a digital output enable the user to interact with external peripherals.
Features
10/100 Ethernet port
2 CAN-HS channels with CAN FD support
LIN channel
USB 2.0
RS-232
Analogue input and digital output
4 DIP switches
10 status LEDs
Open communication protocol for integration over Ethernet and USB
User-programmable
Externally or USB-powered
Table-top use or DIN-rail mount
Usage Examples
ETH-CAN(/FD) and ETH-LIN interface
CAN(/FD) — LIN gateway
CAN — CAN-FD gateway
Remaining bus simulations
User-programmable HiL simulations
Integration
The open communication protocol (API) allows to easily access CAN(/FD) and LIN channels over Ethernet (supports both TCP and UDP) or USB VCP. With the help of the communication protocol, the user can configure the device’s CAN/CAN FD/LIN channels and frames can be transmitted and received.
User Programming
The device firmware can also be fully customizable in C language. An open-source SDK, which shows the use of all the peripherals, is available on GitHub. A user application can be uploaded into the device over web bootloader or USB. It is also possible to debug the application directly on the target (STM32 SWD).
Firmware customizable in C/C++
Free-of-charge C language SDK
Free-of-charge IDE and C/C++ compiler
Firmware update over USB, Ethernet or ICSP
