new M-Max ATR CU
M-Max ATR CU High Performance Rugged ATR System with Extended GPU Performance The M-Max® ATR CU high-performance rugged industrial computer provides reliable operation in tough environments. The fully-ruggedized ATR-type aluminum chassis is fanless and uses natural convection and conduction cooling to comply with MIL-STD-810 standards. COTS technology components allow configuring the M-Max® ATR CU to comply with a wide variety of airborne, marine and ground vehicle applications. Delivering outstanding performance comparable to high-end desktop systems, it also features extended graphics capabilities. The system was previously known as M-Max® 910 CU.
M-Max HR 3U CU
M-Max HR 3U CU High Performance Rugged 19/2” System with Extended GPU Performance The M-Max HR 3U CU high-performance rugged industrial computer provides reliable operation in tough environments. The fully-ruggedized 19/2"-type aluminum chassis is fanless and uses natural convection and conduction cooling to comply with MIL-STD-810 standards. COTS technology components allow configuring the M-Max HR 3U systems family to comply with a wide variety of airborne, marine and ground vehicle applications. M‑Max HR 3U CU is a great solution for rapid development and deploy of machine vision and perception applications, as well as for quality inspection and security purposes. With all its capabilities the system will be a perfect fit for robotics and similar AI applications. Delivering outstanding performance comparable to high-end desktop systems, it also features extended graphics capabilities, providing up to 6x HDMI outputs. The system was previously known as M-Max 950 CU.
M-Max 400 TBT1
M-Max 400 TBT1 High Performance Rugged Computer System The M-Max® 400 TBT1 is a high performance rugged computer for mission-critical applications. It is based on the ultra-low power Intel Dual Core i7-6600U CPU. The system is built with a dual 115V AC electrical power system with a wide input voltage range from 90V AC to 264V AC. It is resistant to high voltages, spikes, and surges. Three SBCs and an embedded 16-port switch are encased into an ATR-type enclosure. Its conductively cooled, sealed aluminum chassis incorporates protection from water and dust ingress. Power and system I/O signals are brought out through lightweight, high-density MIL-DTL-38999 connectors.
M-Max SW21X/PS
M-Max SW21X/PS Rugged Gigabit Ethernet Switch M-Max® SW21X/PS is a ruggedized 12/14/16-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing. It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint. Extended salty fog protection is also available upon request. The rugged switch complies with MIL-STD-810G and MIL-STD-704F. The M-Max® SW21X/PS has up to sixteen 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI). The optional embedded power supply is designed to meet MIL-STD-461F specifications. MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
M-Max SW216
M-Max SW216 Rugged Gigabit Ethernet Switch M-Max® SW216 is a ruggedized 16-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing. It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to the VITA75 footprint. The SW216 has sixteen 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI). MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
M-Max VI PR7
M-Max VI PR7 Rugged Industrial Computer with Data Acquisition The M-Max® VI PR7 is a Quad Core rugged industrial computer with data acquisition features for tough environments. The enclosure is designed according to the VITA 75 footprint and can be mounted on different vehicle types. The lightweight compact sealed case with fanless heat dissipation resists contamination and humidity. The system has been certified to comply with MIL‑STD‑810G, MIL‑STD‑461F and airborne MIL‑STD‑704F. The system is expandable by one mPCIe module and one PC/104 Plus board. MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements. The system was previously known as M-Max® 771 PR7.
M-Max VI EP4
M-Max VI EP4 High performance Rugged Industrial Computer Rugged high performance computer for tough environments. The M-Max® VI EP4 enclosure is designed according to the VITA 75 footprint and can be mounted on different vehicle types. Lightweight compact sealed case with patented fanless heat dissipation resists contamination and humidity. Providing shock and vibration protection, the M-Max® VI EP4 can operate under extreme temperatures (-40 to +60 °C). Computing power is in the high-end desktop class. The embedded power supply complies with MIL-STD-704F specification. MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements. The system was previously known as M-Max® 871 EP4.
M-Max 400 RC
M-Max 400 RC Relay Systems Interface Unit M-Max® 400 RC is a highly reliable compact rugged computer for building all-electric interlocking distributed systems. The system is designed for converting CAN‑interface control signals (twisted pair or single-mode fiber) into relay control signals of railroad automation systems. The M-Max® 400 RC uses ‘2 out of 2’ architecture for higher reliability of control signals. Two autonomous identical computers inside the M-Max® 400 RC are connected by internal interfaces. External relays are connected to control outputs in a way to get an AND circuit in signal control. Each computer has an independent power input and an internal uninterruptible power supply (UPS) based on ultracapacitors, ensuring up to 40 seconds of operation with the input power cut off. Depending on configuration the system allows to maintain 12 or 24 paired relays.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters