MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Postcode104/ISA
Debugging tool with PC/104 header
The Postcode104/ISA is a ‘Power On Self Test’ (POST) code board that is an excellent microprocessor based debugging tool. Featuring both a PC/104 bus and an ISA connector, POST codes can be toggled through to quickly identify any errors.
Plugging the module onto a Single Board Computer’s PC/104 or ISA BUS provides a ‘Power On Self Test’ at system startup. POSTcodes are captured from port 80h/84h and saved in EEPROM memory. The Postcode104/ISA has two hundred fifty POSTcodes stored in a FIFO buffer that can be viewed via the onboard LED display. PREV and NEXT buttons on the module allow the user to toggle through the list of POSTcodes to quickly identify errors. A serial output is provided for printing with time stamped code history. Features reset, polling, and storage modes.
The Postcode104/ISA is a standalone tool measuring 3.75″ x 1.75″ that runs off power supplied by the computer Bus.
VersaTainer
Rugged PC/104 or EBX Enclosure
The VersaTainer (VT104) is a rugged EBX and PC/104 enclosure system constructed of .125″ aluminum and designed for hostile and mobile environments. It features a dual system of shock and vibration isolation which comprises of internal rubber corner rails absorb high-frequency vibrations, while the entire enclosure is mounted on the host platform with a thick rubber pad which absorbs low-frequency G-forces. The rubber pad may be removed for optional mounting solutions such as hard mounting, flange endcap, or fluidic mount assembly.
The VersaTainer is capable of housing PC/104 and EBX payloads. For PC/104, the stack mounts axially along the entire length of the enclosure body. For EBX, An optional EBX mounting plate (VT-EBX) is available to mount the SBC to be horizontally with ample room for several PC/104 accessory cards to be installed. Accessory modules such as hard drives larger than 3.550″ x 3.775″ can be mounted to an optional septum plate that installs vertically into rails that run the length of the enclosure. For smaller items, an optional PC/104-size aluminum plate allows for direct mounting in the PC/104 stack.
The VersaTainer enclosure cross section measures 7.10″ wide by 5.70″ high (not including mounting pad) and is available in standard lengths from 4″ to 12″ and custom lengths up to 48″. Each VersaTainer is available as a kit with mounting accessories. Blank and pre-designed endcaps are available from stock, or the customer may design their own cutouts using one of our VersaTainer endcap templates. These rugged enclosures have been protecting PC104 systems all over the world in the harshest environments the mining, transportation, military, and aerospace industries have to offer. The VersaTainer and its standard accessories are RoHS compliant.
CanTainer
Rugged PC/104 Enclosure
The CanTainer is a rugged PC/104 enclosure system constructed of .125″ aluminum and designed for hostile and mobile environments. It features a dual system of shock and vibration isolation: The PC/104 modules are mounted axially in the enclosure with four internal rubber corner rails to absorb high-frequency vibrations, while the entire enclosure is mounted on the host platform with a thick rubber pad which absorbs low-frequency G-forces. The rubber pad may be removed for optional mounting solutions such as hard mounting, flange endcap, or fluidic mount assembly.
The CanTainer enclosure cross section measures 6.00″ wide by 5.45″ high (not including mounting pad) and is designed to mount PC/104 boards axially along the entire length of the enclosure body. The enclosure is available in standard lengths from 2″ and 12″ with custom lengths up to 48″.
To mount non PC/104 boards or items such as hard drives that are larger than 3.550″ x 3.775″, there is an optional septum plate. These install vertically into rails that run the length of the enclosure. For smaller items, an optional PC/104-size aluminum plate allows for direct mounting in the PC/104 stack. Each CanTainer is available as a kit with mounting accessories. Blank and pre-designed endcaps are available separately, or the customer may design their own cutouts using one of our CanTainer endcap templates. These rugged enclosures have been protecting PC104 systems all over the world in the harshest environments the mining, transportation, military, and aerospace industries have to offer.
TPSi1075
Isolated 75W DC/DC Power Converter
Tri-M's TPSi1075 is an isolated PC/104-Plus power solution, designed for embedded applications requiring isolation and clean power in rugged environments.
With wide-range input voltages, transient suppression, galvanic isolation, and quick-disconnect terminal mating plugs, this rugged design is ideal for any industrial application.
Designed for harsh environments, including military standards, shock, vibration and extended temperature, the TPSi1075 is well suited for transportation, defence, and aerospace industries. For reliable protection and high performance, the TPSi1075 is the perfect solution for isolated DC power.
BAT-SLA45
45 Watt-hour Sealed Lead Acid Backup for Smart Charging Power Supplies
The BAT-SLA series includes the BAT-SLA25 and the BAT-SLA45. The BAT-SLA battery backup units have PC/104 footprint and create a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. Each BAT-SLA includes five SLA batteries for a nominal backup voltage of 10 volts. The BAT-SLA45 utilizes 4.5Ahr batteries for a total of 45 watt-hrs of backup power. Therefore a BAT-SLA45 can supply backup power for up to sixty minutes for a 45 watt load.
The BAT-SLA includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT-SLA from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V)
The BAT-SLA has a current activated fuse for protection against shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for ambient temperature measurement which can be read by the HESC.
BAT-SLA25
25 Watt-hour Sealed Lead Acid Backup for Smart Charging Power Supplies
The BAT-SLA series includes the BAT-SLA25 and the BAT-SLA45. The BAT-SLA battery backup units have PC/104 footprint and create a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. Each BAT-SLA includes five SLA batteries for a nominal backup voltage of 10 volts. The BAT-SLA25 utilizes 2.5Ahr batteries for a total of 25 watt-hrs backup. Therefore a BAT-SLA25 can supply backup power for up to sixty minutes for a 25 watt load.
The BAT-SLA includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT-SLA from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V)
The BAT-SLA has a current activated fuse for protection against shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for ambient temperature measurement which can be read by the HESC.
BAT104-NiMh
PC104 NiMh Battery Backup
The BAT104-NiMh creates a complete NiMh UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. The BAT104-NiMh includes seven 2300ma-hr NiMh batteries for a total of 19.3 watt-hours of power. Therefore a BAT104-NiMh can supply backup power for up to sixty minutes to a 19.3 watt load.
The BAT104-NiMh includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-NiMh from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V).
The BAT104-NiMh has both a thermal fuse and a current fuse for protection against overcharging, and shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for charge termination, which can be read by the HESC.
BAT104-NiCd
PC104 NiCd Battery Backup Module
The BAT104-NiCd creates a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. The BAT104-NiCd includes seven 600ma-hr NiCd batteries for a total of 5 watt-hours of power. Therefore a BAT104-NiCd can supply backup power for up to sixty minutes to a 5 watt load.
The BAT104-NiCd includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-NiCd from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V).
The BAT104-NiCd has both a thermal fuse and a current fuse for protection against overcharging, and shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for charge termination, which can be read by the HESC.
HPSC104-SER
160 Watt UPS High Power PC/104 Vehicle Power Supply with Smart Charging
The HPSC104-SER is a DC-DC converter that includes a flash based microcontroller and 4 amp charger for advanced power management and smart battery charging. Combined with a Tri-M standard battery pack or super cap module, the HPSC104-SER can be used as an Uninterruptible Power Source (UPS) for a PC/104 system. The HPSC104-SER is designed for low noise embedded computer systems, has a wide input range of 6 to 40 V DC and is ideal for battery or unregulated input applications.
The HPSC104-SER provides up to four stages of battery charging and can charge SLA, NiCd, and NiMh batteries and level two and three SMBus compatible batteries. Charge currents are up to 4A, and battery charging voltages from 10V to 35V DC.
The HPSC104-SER has advanced power management functions that allows timed on/off control of the unit, notification of changes to main power and changes in the battery status. For example, the HPSC104-SER can be programmed to power off the main outputs in 60 seconds and then turn them on again 12 hours later. In addition to smart charging and power management the HPSC104-SER can monitor up to 16 different temperatures using digital I²C digital temp sensors. The HPSC104-SER is available as RoHS, is PC/104 compliant and rugged enough for to meet the demands on military and mining vehicle power supplies, including -40°C to +85°C extended temperature rating.
HPS3512
203W Smart PC104 PSU
The HPS3512 is a high power, high performance PC104 PSU that supplies +3.3V, +5V, and +12V outputs. The HPS3512 also includes a flash based microcontroller that supplies advanced power management, and an RS232 serial port. The HPS3512 is designed for low noise embedded computer systems, has a wide input range of 6-40V (>6:1) and is ideal for battery or unregulated input applications. The HPS3512 is specifically designed for vehicular applications and has heavy-duty transient suppressors (up to 18000W) that clamp the input voltage to safe levels, while maintaining normal power supply operation.
The HPS3512 is a state-of-the-art Mosfet based design that provides outstanding line and load regulation with efficiencies up to 90 percent. Organic Semiconductor Capacitors (OSC-CON) and Polymerized Organic Semiconductor capacitors (POSCAP) provide filtering that reduces ripple noises below 20mV. The low noise design makes the HPS3512 ideal for use aboard aircraft or military applications or wherever EMI or RFI must be minimized. Constant frequency architecture controllers provide excellent line and load transient response on the +5VDC and +12VDC outputs.
The HPS3512 has advanced power supply management functions that allows timed on/off control of the HPS3512, notification of changes to main power and secondary power status. For example, the HPS3512 can be programmed to power off the outputs in 60 seconds, and then turn on again 12 hours later.
The HPS3512 size is 3.55×3.775 inches, which is the same size as the PC/104 standard, and has the same mounting holes pattern as the PC/104 standard. However, the HPS3512 does not include the PC/104 bus connectors. All generated voltages are provided to a removable header. A removable plug allows the HPS3512 to be easily installed. The RS232 serial port is provided on a 2×5 row pin header.
The HPS3512 can be configured to meet almost any power supply and battery powered need for embedded applications, whether that is a simple +5V application, or providing power for backlighted LCD panels.
