Connect Tech’s Xtreme/10G Managed Ethernet Switch/Router provides high density, high port count Layer 2 switching and Layer 3 routing with 10G uplinks. A total of 36 switchable ports, with 4×10G, 8×1GbE (SGMII), and 24×1GbE (Copper 10/100/1000Mbps) ports in an extremely small form factor 85mm x 85mm.
The device targets managed Layer 2 and Layer 3 equipment in SMB, SME, and industrial applications where high port count 1GbE switching with 10G aggregation/uplinks are required.
Technical specifications | |
Ethernet Switch Engine | Vitesse VSC7448 Carrier Grade Ethernet Switch Chipset |
Ports |
36 Total Switching Ports • 4x 10G (SFI) Ports • 8x 1G (SGMII) Ports • 24x 1G (Copper 10/100/1000Mbps) Ports |
Memories |
• 4Gb DDR3 SDRAM • 128Mb Serial NOR Flash |
I/O Connectors | High-Density 440-pin Board-to-Board Connector |
Layer 2 & Layer 3 Forwarding |
• IEEE802.1Q switch with 4K VLANs and 32K MAC table entries • Push/pop up to 3VLAN tags on ingress and egress • RSTP and MSTP support • Fully non-blocking wire-speed switching performance for all frame sizes • IPv4/IPv6 unicast and multicast Layer 2 switching with up to 32K groups and 1K port masks • IPv4/IPv6 unicast and multicast Layer 3 forwarding (routing) with reverse path forwarding (RPF) support • IGMPv2, IGMPv3, MLDv1, and MLDv2 support • Link aggregation (IEEE 802.3ad) • Independent and shared VLAN learning (IVL, SVL) • Jumbo frame support |
Quality of Service |
• Four megabytes of integrated shared packet memory • Eight QoS classes with a pool of up to 32K queues • TCAM-based classification with pat tern matching against Layer 2 through Layer 4 information • Dual- rate policers selected by VCAP IS2, eight single- rate priority policers per port, and four single-rate port policers for each port • Flexible 4K ingress QoS mappings and 8K egress QoS mappings for VLAN tags and DSCP values • Up to 4K egress VLAN tag operations • Audio/ video bridging (AVB) with support for time-synchronized, low- latency and video streaming services • Priority-based f low control (PFC) (IEEE 802.1Qbb) |
Security |
• Vitesse Content Aware Processor (VCAP™) packet filtering engine using ACLs for ingress and egress packet inspection • Storm controllers for flooded broadcast, flooded multicast, and flooded unicast traffic • Per-port, per-address registration for copying/redirecting/discarding 32 VCAP single-rate policers |
Maximum Bandwidth | 80Gbps |
Layer 2 Switching Parameters |
• Packet Buffer: 32Mb • MAC Table Size: 32k • Layer 2 Multicast Port Masks: 1k • Super VCAP blocks: 8 • VCAP CLM entries: 4k • VCAP LPM entries: 4k/1k (IPv4/IPv6) • VCAP IS2 entries: 4k/1k (IPv4/IPv6) |
Layer 3 Switching Parameters |
• Router Legs: 128 • IP unicast routes/hosts: 4k/1k (IPv4/IPv6) • Next -hop/ ARP table entries: 2k • IP multicast groups: 2k/512 • Multicast router leg masks: 1k • ECMPs: 16 |
Management Access |
Web Interface CLI via RS-232 Software API SMNP |
Input Voltage | +4V to 14V Input Range (External Connector) |
Power Consumption | 24W Max / 14W Idle |
Dimensions | 85mm x 85mm |
Environmental and physical specifications |
|
---|---|
Operating Temperature | -40°C to +85°C (chipset rated to +125°C thermals) |
Model | Description |
XDG201 | 36 port Managed Switch (4x 10GbE; 8x 1GbE [SGMI]; 24x 1GbE) high-density board-to-board connector, +4V to 14V input range,85mm x 85mm module -40°C to +85°C. RoHS Compliant |
XDG201‑01 | Xtreme/10G Managed Ethernet Switch/Router with SMBStaX Firmware – includes XDG201 Conduction Cooled Heatplate |
XDG202‑01 | Xtreme/10G Managed Ethernet Switch/Router with IStax Firmware – includes XDG201 Conduction Cooled Heatplate |
Cables and accessories | |
XBG301 | XDG201 Development Carrier |
XHG201 | XDG201 Conduction Cooled Heatplate |