MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Midi
Box PC with wide temperature performance and abundant I/O
MIDI systems provide an efficient solution for customers seeking a Box PC with wide temperature performance and abundant I/O. MIDI systems feature expansion-ready front panels with removable cover plates to expose additional connector cutouts. The enclosure can easily accommodate up to two additional PC/104 style I/O modules or PCIe MiniCards. The cover plate provides ample cooling for Diamond’s rugged conduction-cooled SBCs. Table-top, wall mount, and DIN rail mounting options are all included.
MIDI systems are available in a variety of standard configurations based on Diamond’s Aries (Bay Trail x86), Venus, and Eagle / Eaglet (ARM) SBCs.
SabreNet-12000
Rugged 12-Port Managed Gigabit Ethernet Switch
SabreNet-12000 is a compact rugged switch featuring 12 ports of 10/100/1000Base-T managed Ethernet. The switch is based on Diamond’s EPS-12000 compact Ethernet board-level switch. The ports are arranged in groups of 4 and 8 on two MIL-DTL-38999 connectors.
The SabreNet-12000 includes embedded Layer 3 routing/switching software with optional IEEE1588 / PTP feature. The switch can be managed via a web interface on any of the ports as well as a local RS-232 port accessed on the 4-port connector.
SabreNet-12000 has passed MIL-STD-810G shock and vibration testing.
Power Supply Options
Two power and enclosure configurations are available:
Models numbered 1xx include a MIL-STD-461 power filter module and support an input voltage range of 7-34VDC. These units are housed in the short enclosure.
Models 2xx include a MIL grade isolated power supply based on Diamond’s JMM-7500, which provides compliance to MIL-STD-461, MIL-STD-704, and MIL-STD-1275 and supports an input range of 9-60VDC. These units are housed in the taller enclosure.
SabreCom-VNS
Rugged Mission Computers with Core i7 CPU and I/O Expandability
The SabreCom series of rugged mission computers brings a competitive level of price/performance to the market. These systems are based on Diamond’s line of rugged, I/O-rich single board computers. SabreCom-VNS is the standard model and is based on Diamond's Venus rugged SBC with 7th Generation Intel «Kaby Lake» Core i7 processor with a combination of features making it ideal for rugged environments. Latching I/O connectors, thicker PCB, soldered + ruggedized SODIMM memory, and integrated heat spreader / mounting plate make Venus the perfect platform for mid-to high-level CPU performance in a compact and affordable package.
SabreCom Venus is available in a standard configuration with competitive leadtime and without minimum order quantity or NRE charges. Customization with additional I/O modules and power supplies, as well as custom connectors and case designs, is available with moderate design fees and low minimum order quantities. Contact us to learn how Diamond is changing the game for cost-effective yet high-quality and high-reliability rugged computer systems and Ethernet switches.
Environmental Qualification
SabreCom systems have been tested and qualified to MIL-STD-202G shock and vibration levels to assure reliable performance in the most rugged vehicle applications. The sealed enclosure design features gaskets on all mating surfaces as well as all connector mounting screws to provide IP67 environmental protection. Unlike other rugged enclosures, the main body consists of a single block of aluminum milled to create a seamless 4-wall structure, eliminating the T joints that can be a source of leakage. All SabreCom systems are operational up to the full temperature range of the embedded SBC due to the efficient conduction cooling of the CPU directly to the top heat sink cover of the enclosure.
Mass storage
Mass storage of 256GB TLC technology is included as standard. Storage can be increased up to 1TB as an option using SATA DOM and mSATA modules. SLC technology is available.
Power supply
SabreCom systems are powered by Diamond’s rugged JMM-7500 power supply. This power supply features 80 watts output power with optional isolation and MIL-STD-461/704/1275 compliance.
Operating systems
Your choice of Linux or Windows 10 64-bit OS can be preloaded onto the flashdisk. Windows 10 OS features Diamond’s Power Loss Protection™ feature that survives repeated instant removal of power without requiring to wait for the normal Windows shutdown process.
STB-104 Module
STB-104: PC/104 Screw Terminal Board
The STB-PC/104 is a miniature PC/104-format screw‑terminal board that enables you to easily connect sensors, control signals, etc. to a PC/104 system. A 50-pin connector is provided for mating with a short cable to any Diamond Systems data acquisition module. Each pin on the connector is brought out to a screw terminal, enabling you to easily add, remove, and modify wiring as needed without complicated cable construction and modifications. The screw terminals are angled for easy operation.
This unique board is the same size as a PC/104 module, so it fits conveniently right on top of the PC/104 stack. All necessary mounting hardware is included.
Dimensions: 3.55″ x 3.775″
Screw terminal height: 0.59″ above top of PCB
Configuration: 3 rows of 16 terminals + 1 row of 2 terminals
Proto-104 Module
PC/104 Prototype Board
The PROTO-PC/104 is a PC/104-format prototype board that mounts on top of the PC/104 stack and allows you to build a custom peripheral or interface for your PC/104 system. All necessary connectors and hardware are provided to reduce your component sourcing efforts. A sample schematic is included to show you how to build a simple interface to the PC/104 bus, including data I/O, address mapping, DMA, and interrupt operation.
Connectors and Spacers
PC/104 Bus Headers and Mounting Spacers
PC/104 Bus Headers
Use these parts to add your own circuit to a PC/104 system, or to add a PC/104 module to your own custom board. These are the same headers used on all our PC/104 modules and are guaranteed to be compatible with any PC/104-compliant header. Order 64-pin (8-bit main bus) and 40-pin (16-bit bus extension) components separately. Standard headers shown are stackthrough, allowing you to mount a module above and below. Non-stackthrough headers have the female socket on top and solder tail pins, allowing you to mount a module on top only.
PC/104 Standards for Bus Headers
The 8-bit (64-pin) header is required on each PC/104-compliant or PC/104-compatible circuit board. The 16-bit (40-pin) header is optional and is not used by all modules. All of Diamond Systems’ PC/104 modules come with both headers.
PC/104 Mounting Spacers
We now offer PC/104 spacers for board mounting. These .600″ length spacers are a non-standard length and can be hard to find in small quantities. Order either in bulk quantity (4 per board required) using SPC-104, or as the MTG104 single-board mounting kit. The kit includes 4 each spacers, #4-40×1/4 screws, and #4 nuts.
SATADOM Flashdisks
SATA Disk-on-Module Flashdisk Solid-State Storage - up to 256GB capacity!
Install an MLC or SLC SATADOM Flashdisk module onto any of our Aries or Helix single board computers for rugged, lightweight, solid-state mass storage. The flashdisk module works just like a SATA disk drive and requires no drivers. It provides high-speed nonvolatile mass storage in capacities of 32GB to 256GB. The flashdisk mounts on a SATA disk-on-module connector and is held in place with two spacers and screws (included). It operates over −40ºC to +85ºC.
SATADOM flashdisk features:
SATA compatible interface
Single-level cell (SLC) flash modules for faster transfer speeds, lower power consumption, and higher cell endurance
Multi-level cell (MLC) flash modules for lower cost and higher storage density
Burst read/write of 300MB/s
Sustained read performance of up to 165MB/s (SLC), 155MB/s (MLC)
Sustained write performance of up to 150MB/s (SLC), 80MB/s (MLC)
Static wear-leveling scheme with dynamic block allocation increases life and optimizes performance
Built-in hardware ECC enables up to 16/24 bit correction per 1K bytes
Flash bad-block management
Self-Monitoring, Analysis and Reporting Technology (SMART)
Power failure management
ATA secure erase
TRIM enabled for improved performance
Supports boot function for Windows Embedded Standard 7, Windows Embedded CE, and Linux
Low power consumption:
MLC typical 475mA when active and 135mA in sleep mode
SLC typical 330mA when active and 95mA in sleep mode
Dimensions: 40.0×30.0×9.0mm
-40ºC to +85ºC operation
RoHS compliant
mSATA Flashdisk
mSATA Flashdisk Solid-State Storage - up to 512GB capacity!
Install a MLC or SLC mSATA flashdisk module onto any of our Atlas or Hercules III single board computers for rugged, lightweight, solid-state mass storage. The flashdisk module works just like a SATA disk drive and requires no drivers. It provides high-speed nonvolatile mass storage in capacities of 8GB to 512GB. The flashdisk mounts on a mSATA connector and is held in place with two spacers and screws (included). It operates over −40°C to +85°C.
mSATA flashdisk features:
SATA compatible interface
Single-level cell (SLC) flash modules for faster transfer speeds, lower power consumption, and higher cell endurance
Multi-level cell (MLC) flash modules for lower cost and higher storage density
Burst read/write of 300MB/s
Sustained read performance of up to 165MB/s (SLC), 155MB/s (MLC)
Sustained write performance of up to 150MB/s (SLC), 80MB/s (MLC)
Static wear-leveling scheme with dynamic block allocation increases life and optimizes performance
Built-in hardware ECC enables up to 16/24 bit correction per 1K bytes
Flash bad-block management
Self-Monitoring, Analysis and Reporting Technology (SMART)
Power failure management
ATA secure erase
TRIM enabled for improved performance
Supports boot function for Windows Embedded Standard 7, Windows Embedded CE, and Linux
Low power consumption:
MLC typical 475mA when active and 135mA in sleep mode
SLC typical 330mA when active and 95mA in sleep mode
Dimensions: 50.8×29.85×6.0mm
-40°C to +85°C operation
RoHS compliant
Jupiter-MM-7000
Rugged PC/104 Power Supplies
The JMM-7000 family provides compact, rugged, MIL‑compliant DC power in the popular PC/104 form factor (3.6×3.8"/90×96 mm). JMM-7000 models offer compliance to a range of standards, including MIL-STD-461, MIL-STD-704, MIL-STD-1275, MIL-STD-810G, and DO-160. Optional 500V isolation, brownout protection, and supercapacitor-based UPS enhance these supplies’ utility in compact airborne, land, and sea vehicle electronic systems.
The JMM 7300 series provides full MIL standards compliance. The depopulated JMM 7000 series are intended for use in commercial industrial applications where backup power or isolated power is required.
SuperCapacitor Backup
The SEP-7000 series of PC/104-sized supercapacitor energy packs is designed for use with the JMM-7000 power supplies with UPS option. These packs provide up to 3300 joules (wattsec) of backup energy to maintain stable system operation in case of power interruption. The charge / backup controller on the JMM-7000 utilizes a new supercapacitor charging technology that automatically controls the charging current and voltage of each capacitor bank in the pack to avoid overcharging or other potentially damaging fault conditions. Charge / discharge status and other control functions are available via LEDs on the JMM-7000 and via USB connection to the host CPU.
SEP-7000 energy packs are available in two capacities and two configurations. A plug-on configuration mounts directly to the bottom side of the JMM-7000 to eliminate cables and create the most compact, rugged solution. A cable-connected configuration allows the energy packs to be positioned at a remote location to fit varying application requirements.
Emerald-MM-8PLUS
High Performance PC/104-Plus 8 Port RS232/422/485 Serial I/O Module
Emerald-MM-8Plus is a high performance multi-protocol serial communications board offering eight ports on a single PC/104-Plus module. Supporting baud rates up to 921.6K bps in RS-232 mode or 1.8432Mbps in RS422 or RS485 mode, each port can be individually selected for RS-232, RS-422, RS-485 or TTL level operation. Both local-echo and non-local-echo modes are supported for RS-485. Protocol selection is achieved via a jumper block for each of the eight ports. Line termination for RS-422/485 modes is also jumper-selectable.
Configuration of the Emerald-MM-8Plus is simple, using the built-in plug and play technology. For manual configuration, the base address for the board may be set in software, defining a 4K block of configuration space used to access the on-board registers. A single 32-bit read shows the detailed interrupt status for each of the eight ports. The PCI «slot» is defined through a jumper block. As with all Diamond Systems products, jumpers are paralleled with locations for zero ohm resistors to create a rugged, shock-and- vibration-resistant implementation.
Emerald-MM-8Plus is based on the Exar 17D158 octal UART IC. This device contains 8 4 identical sets of 16C55registers, one for each port, and is compatible with the standard PC serial port. Each port contains 64‑byte transmit and receive FIFOs to support the high-speed data rates.
Emerald-MM-8Plus also offers 8 convenient digital I/O lines. The direction of each line is independently programmable. Finally, Emerald-MM-8Plus also offers a 16-bit programmable counter / timer with a configurable clock source.
Two I/O headers are provided, with four serial ports and four digital I/O lines on each header. The board operates on +5V only, eliminating the need for a +12V supply that is often required for serial port operation.
Operating Systems Compatibility
The Emerald-MM-8Plus is compatible with Windows 98/NT/2000/XP and Linux. If using Exar’s default Vendor and Device ID, you can use Exar’s module driver for Linux kernels 2.4.x and Linux kernels 2.6.1-2.6.7. Linux kernels 2.6.8 and newer have support in the kernel for the XR17×15x PCI UARTs. See the «8250_pci.c» in the kernel. If using your own Vendor and Device ID, you can use the module driver available from Exar after you modify the Vendor and Device ID accordingly in the module driver.
