MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
M-Max V75 Short chassis
Rugged VITA 75-compliant Conduction-cooled Enclosure
The M-Max® V75 Short chassis is a fully sealed rugged enclosure with passive cooling designed according to the VITA 75 footprint, providing reliable operation in tough environments. Typical systems housed in this VITA 75-compliant enclosure deliver IP66 dust and moisture protection, withstand shocks up to 40g and vibration up to 2.5g. The fully sealed enclosure houses one PC/104 or similarsized board. The configurable front panel can be outfitted with variety of customer-defined connectors. The M-Max® V75 Short chassis is tested and guaranteed over temperature range of −40 to +70 °C @ 11W.
M-Max ATR-chassis
Rugged ATR conduction-cooled enclosures family for computer systems
The M-Max® ATR-compliant chassis is a family of fully sealed rugged enclosures with passive cooling, providing extreme physical protection for high performance systems.
The machine-worked aluminum chassis is especially designed for the most challenging environments. Providing excellent shock and vibration protection, the completely fanless chassis uses natural convection and conduction cooling.
The fully sealed 1/2 ATR Short version enclosure houses up to 8 PC/104 or similar-sized boards. The configurable front panel can be outfitted with variety of customer-defined connectors.
M-Max SW208
Rugged Gigabit Ethernet Switch
M-Max® SW208 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments including transportation (ground, rail, air and marine), agriculture, and mining and processing.
It accepts a wide power supply voltage input, and is tested and guaranteed over temperature range of −40 to +75°C. Its rugged enclosure is designed according to VITA75 footprint.
The SW208 has eight 10/100/1000 Mbps copper twisted pair ports. Support for control and management is through web interface, and host processor access through a Command Line Interface (CLI).
MicroMax, as a manufacturer of ruggedized industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
MM-SSD-1TB
Solid state drive
MM-SSD-1TB SSD is over 20 times faster than a typical hard drive and consumes significantly less power. It enables your computer to boot up almost immediately, load files and programs almost instantly, accelerate demanding applications, and manage power so that your battery lasts up to 50 minutes longer. Backed by the most advanced feature set available — Native Write Acceleration, RAIN technology, Adaptive Thermal Protection, and our exclusive data integrity algorithm — the MM-SSD-1TB delivers a complete performance gain.
M-Max VT AR TRN-02
Rugged Industrial Computer
The M-Max® VT AR TRN-02 is a high-performance rugged industrial computer for demanding and critical applications requiring performance comparable to desktop systems. The system is IP66 rated and can withstand shocks of up to 40g and vibration of up to 6g.
The M-Max® VT AR TRN-02 is configured with Intel Core i3 1.9 GHz CPU and Intel HD 530 video, with hardware video decoding. The M-Max® 800 AR TRN-02 has 5x LAN Gigabit Ethernet, 1x RS-232 and 3x USB 2.0 ports. Data storage options include vibration proof industrial SSDs with RAID functionality (software or hardware option).
The system has replaced our M-Max® 800 EP2/TRN-02 which was based on EP2 platform.
M-Max 820 EP4/USO
Rugged Industrial Error-free Rackmount System
The M-Max® 820 EP4/USO consists of two high performance rugged industrial computers with passive cooling. It is designed to provide reliable operation using ‘2 out of 2’ or redundant architectures in harsh environments for critical applications.
Providing shock and vibration protection, the M-Max® 820 EP4/USO can operate under extreme temperatures from −40 to +60 °C, dust and humidity.
Data storage options include vibration proof industrial SSDs with RAID functionality (sofware or hardware option).
The computer is used as a part of a safety system at railroad and operate as an optical time-domain reflectometer.
M-Max 700 PR/TTI
Rugged Industrial Computer with UPS Subsystem
M-Max® 700 PR/TTI is a high performance rugged computer for vehicle data acquisition. The system is designed to operate in extremely harsh environments and is suitable for most applications that support real-time video encoding. The Max® 700 PR/TTI is equipped with video capture CVBS, CAN interfaces, and has an expanded set of RS-232/422/485 ports, plus digital I/O. The embedded video encoder with JPEG2000 compression/decompression supports three video input channels and video decoders for simultaneous sampling.
The unit’s internal super-capacitor based UPS provides 2 minutes of backup power.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
M-Max 400 ST/USO
Rugged Industrial Error-free Computer with UPS Subsystem
The M-Max® 400 ST/USO is an error‑free rugged computer for on‑board and off-the-shelf applications. It provides error-free signaling information processing, based on 2-out-of-2 architecture.
The M-Max® 400 ST/USO contains two identical subsystems connected to each other via internal interface. Each subsystem has its own processing core and a UPS employing an intelligent ultracapacitor-based charging device.
The M-Max® 400 ST/USO’s two independent CPUs form a vital processing core and perform calculations (such as interlocking logic) in different ways. Once per cycle they are synchronised with each other to exchange data and perform consistency cross-checks.
The UPS ultracapacitors provide the system with 70 seconds of backup power. The system is designed for use on stationary objects within the railway infrastructure.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
Gateway-CAN-MVB2
Rugged Intelligent Locomotive Gateway
The Gateway-CAN-MVB2 rugged computer is used to decode signals between railroad continuous Automatic Train Control (ATC) systems with CAN interfaces or similar devices and onboard systems utilizing Multifunction Vehicle Bus (MVB).
This fanless intelligent Gateway is designed to be used in onboard safety systems installed in locomotives, high speed trains such as Velaro, Desiro and others. The system can be easily adapted to the technical requirements of different railroad vehicles.
This IP65 rated system is housed in a rugged aluminum enclosure with dual shock and vibration protection. It is based on proven PC/104 technology, and its compact design and low power makes it the ideal solution for on-board smart interface conversion.
Emerald-MM-8E/EL
PCI/104-Express 4/8-Port Serial Port Module with Opto-isolation
The Emerald-MM-8EL-XT is a family of high performance PCIe/104 «OneBank» serial I/O modules offering 4 or 8 multiprotocol serial ports with software-controlled configuration and optional opto-isolation. An accessory microcontroller manages all port configuration and provides 8 auxiliary digital / analog I/O lines for general purpose use.
The serial ports are based on a high speed PCIe octal UART with 256-byte TX/RX FIFOs and auto RS-485 transmit control. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Each port is independently isolated with an isolated power + signal chip, plus additional isolators for control signals. The board features intelligent power management that limits inrush current on power-up and also enables power-down of unused serial ports for power savings.
Opto-isolated models feature independent 2500VRMS isolation circuits for enhanced reliability in vehicle or long cable applications. All ports also feature +/-15KV ESD protection. Each serial port is available on an independent latching connector for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMM-8EL-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs.
EMM-8EL-XT also offers 8 digital/analog I/O lines which are programmable from the on-board microcontroller. Each I/O line can be configured for digital input or output. Seven of the I/O lines can be configured for 12-bit A/D input with selectable 0-2.048V or 0-3.3V input ranges.
EMM-8EL-XT contains no configuration jumpers; all configuration and control is done with an onboard microcontroller using application software included with the product. All configuration settings are stored in the microcontroller’s flash memory and are automatically loaded on power-up.
Cable Kits
Cable kits are available for both 4-port and 8-port boards They include individual cables with dB9 male connectors for each serial port and a ribbon cable for the auxiliary analog/digital I/O.
Configuration software
The EMM-8E family includes an on-board microcontroller to handle all configuration and control of the board’s features. The microcontroller is managed with a comprehensive software suite that makes configuring the EMM-8E fast and simple. A graphical control panel, a console application, and drivers for Windows and Linux are provided to enable convenient configuration of the board and control of the I/O features in a laboratory or system assembly environment, or embedded in the customer’s application software.
