Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications.
Technical specifications | |
Analog Inputs |
|
---|---|
Channels | 32 Single Ended / 16 Differential |
Resolution |
DAG003: 16-bit DAG004: 16-bit DAG005: 12-bit (low cost option) |
Sampling Rate | 100,000 samples per second |
Calibration | Built in temperature Auto calibration |
Protection | ±25V |
Ranges |
Software-Programmable Input Ranges: 0-5V, 0-10V, ±5V, ±10V |
Accuracy | 1LSB INL and DNL |
Signal-to-Noise Ratio | 87 dB |
Analog Outputs (DAG003 only) |
|
Channels | 4 |
Resolution | 16-bit |
Ranges |
Six Programmable Output Ranges: • Unipolar: 0V to 5V, 0V to 10V • Bipolar: ±5V, ±10V, ±2.5V, –2.5V to 7.5V |
Accuracy | 1LSB INL and DNL |
Outputs Drive | ±5mA |
Digital I/O |
|
I/O | 16-bit bidirectional I/O |
Input/Output Ranges | Hardware selectable +3.3V or +5V(TTL/CMOS) |
High Current | 24mA |
Form Factor |
PCI-104 Fully PCI 2.0 bus compliant Jumpers not required for configuration or board detection |
Dimensions | PC/104 compliant: 95.885mm x 90.17mm (3.775" x 3.550") |
Operating System | Linux, QNX, Windows |
Environmental and physical specifications |
|
Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
Model | Description |
DAG003 | Xtreme I/O ADC-DAC, Analog Inputs: 16-bit 32 SE / 16 Diff, Analog Outputs: 16-bit 4 Channels, GPIO: 16-bits |
DAG004 | Xtreme I/O ADC-DAC, Analog Inputs: 16-bit 32 SE / 16 Diff, Analog Outputs: none, GPIO: 16-bits |
DAG005 | Xtreme I/O ADC-DAC, Analog Inputs: 12-bit 32 SE / 16 Diff, Analog Outputs: none, GPIO: 16-bits |
CBG001 | 26 pin header to 1 x DB-25 female for GPIO |
CAG8104 | 40 pin header to 4 x DB-9 Male for ADC |
CAG104 | 10 pin header to 1 x DB-9 male connector for DAC |