The M-Max® SW208 PD1 is a ruggedized 8-Port Gigabit Ethernet Layer 2+ Managed Switch providing reliable operation in tough environments which include transportation (ground, rail, air and marine), agriculture, mining and processing.
It features 1x RS-232 port for configuration, and is tested and guaranteed to operate in −40 to +65°C. The rugged compact aluminum enclosure of the M-Max® SW208-PD1 is fanless and uses passive cooling. The M‑Max® SW208-PD1 has eight 10/100/1000 Mbps copper twisted pair ports.
Support for control and management is through a web interface, and host processor access is through a Command Line Interface (CLI).
Technical specifications | |
Main features: |
Layer 2+ Managed Switch Built-in microcontroller with management software 8K MAC addresses and 4K VLANs (IEEE 802.1Q) 8K IP multicast group support Programmable multi-layer classifier with 8 QoS queues per port DSCP remarking for IPv4 and IPv6 frames Rapid spanning tree protocol (RSTP) support |
Power: | +5 to +36 V DC (non-isolated) |
Power Consumption: | 5.4 W (typical) |
LAN: | 8x switched 10/100/1000 Base-T ports |
Cofiguration port: | 1x RS-232 |
Optional Power Supply: |
External P/S 120 W 90…260 V AC (-40 to +85 °C, IP67) External P/S 50 W AC/DC for DIN-rail (-10 to +60 °C, IP20) External P/S 40 W 90…260 V AC (0 to +40 °C, IP40) |
Connectors: |
1x SNC 28-3/14 (Power) 1x SNC 23-3/14 (RS-232) 8x M12 (Ethernet) All connectors are IP67 |
Indication: | Power ON, 8x LAN activity |
Enclosure: |
Aluminum enclosure Passive cooling system (no fans) |
Weight: | 0.95 kg (preliminary) |
Mechanical (W x H x L): | 154.3 x 148 x 62.3 mm (without end caps and connectors) |
Environmental and physical specifications |
|
---|---|
Operating temperature: |
-40 to +65 °C Complies with MIL-STD-810G (High temp. method 501.5, Low temp. method 502.5, Procedure I, II) |
Storage temperature: | -40 to +85 °C |
Humidity: | Operating: 5 to 95 % at +25 °C, non-condensing |
Vibration |
Operating acceleration amplitude up to 2.5g (3-500 Hz), Complies with MIL-STD-810G (Method 514.6, Procedure I, Category 14) |
Shock: |
Maximum peak shock acceleration up to 10g (11 ms) Complies with MIL-STD-810G (Method 516.6, Procedure I) |
Dust/Moisture: | IP66 |