The ADLINK LEC-BASE MINI is the host carrier board for ADLINK’s SMARC modules and serves as reference design for SMARC modules. The SMARC module plugs directly into the LEC-BASE MINI where the carrier board becomes a design platform for testing and developing your applications.
Technical specifications | |
Display |
Standard conguration: Parallel LCD, single channel LVDS (18/24bit), HDMI Custom conguration: Dual channel LVDS, HDMI, additional HDMI/DP (see order information) RGB and LVDS backlight control header |
Camera | Connector for plug-in camera add-on card |
SDIO | 4-bit SD card slot |
eMMC | 8-bit eMMC interface header |
SPI |
Off module boot use (optional) 2x SPI interface headers |
I²S |
3x I²S interface I2S0 to SGL5000 (default) or AIC3106 (custom option) to audio connector (ARM) I2S1 directly to pin header I2S2 to AlC886 and audio connector (x86) |
I²C |
4x I²C - Power Management - LCD - Camera - GP |
Asynchronous Serial |
4x asynchronous serial ports (UART) - Two with 2 wire handshake (RXD, TXD, RTS#, CTS#) - Two with data only (RXD, TXD) - Logic level interface |
CAN Bus |
2x CAN bus (D-SUB9) Logic level signals from module based CAN bus protocol controllers RXD, TXD only |
USB |
4x USB2.0 host 1x USB3.0 host (from AFB, module dependent) 1x mini USB2.0 OTG/client 2x USB2.0 via miniPCIe |
PCI Express |
One PCIe x1 link connector Two mini PCIe x1 slots PCIe Gen1, Gen 2 or Gen 3 (module dependent) PCIe support signals PCIe wake signal (depending on module) 2x SIM card slots |
SATA | 2x SATA Gen1, Gen2 or Gen3 (module dependent) |
Ethernet | 1x RJ-45 10/100/1000 Ethernet |
S/PDIF | S/PDIF header for audio |
Boot Select Jumpers |
Module: SPI/eMMC/NOR/NAND Carrier: SPI/eMMC/SD Card/SATA Usage is module dependent |
GPIO | 12-pin header (including fan control and HDA reset) |
Alternate Function Blocks |
Dedicated AFB connector Pinout is module dependent (see SMARC specication) |
Dimension | 237 mm x 170 mm (L x W) |
Board Connector | MXM 314 pins |
Environmental and physical specifications |
|
---|---|
Operating temperature | -40°C to +85°C |
Storage temperature | -55°C to +85°C |
Humidity |
5-90% RH operating, non-condensing 5-95% RH storage, non-condensing |
Model | Description |
LEC‑BASE MINI Standard | 2nd Generation SMARC evaluation carrier with triple display (RGB LCD, SC LVDS and HDMI) |
LEC‑BASE MINI Custom | 2nd Generation SMARC evaluation carrier with triple display (DC LVDS, HDMI and HDMI/DP) |
LEC-Starterkit MINI Standard | LEC-Starterkit with LEC-BASE MINI Standard, including SD card and power supply (without LEC module and cooling solution) |