Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none
Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none
Updating results...
Siemens MVB PC/104 Siemens MVB PC/104 MVB Interface Module The MVB PC/104 is an interface module with which it is possible to connect electronic controllers to the MVB. The user of the MVB PC/104 module is provided with API software for their development. The MVB PC/104 connects the parallel PC/104 bus with the serial MVB. Data exchange from the MVB to the PC/104 bus and vice versa is performed via the traffic memory. Arbitration of the traffic memory is performed by the MVBCS1 ASIC. The module is designed for use with a 16-bit CPU with ready acknowledgment. Bytewise accesses to the traffic memory are not possible because of its wordwise organization. Accesses must always be wordwise (only to even addresses). DXStream-HDMI DXStream-HDMI Ultra Low Latency Standalone H.264 Streaming Client The DXStream-HDMI is an intelligent, stand-alone, ultra-low latency H.264 streaming client that receives, decodes, and displays H.264 encoded video streams. The DXStream-HDMI supports the industry standard RTP/RTSP protocols for streaming data via the integrated 100/1000MBit Ethernet connection. This SWaP optimised solution is ideal for rapid deployment in demanding applications in Military, Communications, Transportation, Mining and Energy industries. The DXStream-HDMI features a dedicated hardware decode engine capable of decoding up to 1080p60 H.264 video at full size and full frame-rate with Ultra Low Latency (under 60ms). The intelligent streaming client is configured via a web interface and once configured the DXStream-HDMI runs autonomously without any user interaction. The DXStream-HDMI is an intelligent stand-alone device with it’s own on-board CPU and does not require a host CPU or any driver or OS software. For mechanical convenience, the module can be mounted on a PC/104 stack without consuming host CPU resources. Highlights Real-time H.264 decode at up to 1080p60 Ultra Low Latency technology with latency below 60ms H.264/MPEG-4 AVC (Part 10) Decoder HDMI/DVI output RTSP/RTP streaming protocol support Single, rugged, real-time video streaming client solution Stand-alone operation Web interface for configuration Standard PC/104 mechanical form factor Applications All-round Real-Time Situational Awareness Real-time video feedback from remote platforms Unmanned vehicles (UAV, ROV) Real-time IP video distribution Remote Video Surveillance Border Security Traffic Monitoring and Control
Ruby-MM-412/812/1612 Ruby-MM-412/812/1612 4, 8, or 16-Channel 12-bit Analog Output PC/104 Module The Ruby-MM series provides 4, 8 or 16 channels of 12-bit resolution analog voltage outputs plus 24 digital I/O lines on a single PC/104 module. An on-board precision voltage reference circuit offers analog output ranges of 0-2.5V, 0-5V, and 0-10V in unipolar mode or ±2.5V, ±5V, and ±10V in bipolar mode. All analog outputs can source or sink up to 5mA simultaneously. The analog outputs are based on the DAC8412 quad 12-bit D/A converter chip. This chip resets all outputs to mid-scale on power-up, meaning 0V for bipolar ranges and 1/2 the full-scale voltage for unipolar ranges. To obtain power-on reset to 0V for unipolar ranges, a special-order version is available using the DAC8413 which powers up to zero scale instead. On the 16-channel model, each group of 8 channels can be set for a different output range. On the 4- and 8-channel models, all outputs have the same output range. All outputs are updated simultaneously, either with a software command or in response to an external trigger. The board includes 24 digital I/O lines using an 82C55 chip. All I/O lines have 10K Ohm pull-up resistors for guaranteed logic levels on power-up. Ruby-MM-1612 is designed and tested for extended temperature operation (-40 to +85oC). It requires only +5VDC from the system power supply via the PC/104 bus. Analog ±15V supplies are derived from miniature DC/DC converters on the board. All I/O is contained on a single 50-pin connector compatible with standard .1” connector ribbon cables, such as Diamond Systems’ C-50-18. Ruby-MM-416 Ruby-MM-416 4 Channel 16-bit Analog Output+24 DIO PC/104 Module The new Ruby-MM-416 PC/104 module provides 4 channels of 16-bit resolution analog voltage output. The output range for each channel can be independently selected for 0-10V, ±5V, or ±10V with jumpers. All outputs are updated simultaneously, either with a software command or in response to an external signal. The board includes 24 lines of digital I/O using an 82C55 chip. The I/O connector pinout is compatible with the Ruby-MM-4 12-bit analog output board shown in our catalog on pages 20-21. Other features include +5V-only operation, individual DC/DC converters with filtered outputs for each DAC to supply ±15V for operation, and a six-layer circuit board to bury and shield the analog signals.
Express-IB Express-IB COM Express® Basic Size Type 6 Module with 3rd Generation Intel® Core™ i7/i5/i3 Processor The Express-IB is a high performance COM.0 R2.0 Type 6 module featuring an Intel® Core™ i7/i5/i3 processor supporting Intel® HD Graphics integrated on the CPU with three independent displays. A PCI Express x16 Generation 3.0 bus is available for discrete graphics expansion or general purpose PCIe (optionally configure as 2 x8 or 1 x8 + 2 x4). The Express-IB targets applications in Government, Military, Medical, Digital Signage and Communications and is ideal for customers with advanced processing performance and graphics requirements looking to reduce development time by outsourcing the base design of their system and focusing on application functionality. The Express-IB supports Intel® Advance Vector Extensions (Intel® AVX v1.0), with its improved Floating Point Intensive Applications, and also offers the benefits of increased bandwidth provided by USB 3.0. Express-IBE2 Express-IBE2 COM Express® Basic Size Type 2 Module with Intel® Core™ i7/i5/i3 Processor The Module Computing Product Segment (MCPS) is pleased to introduce its latest COM Express® Type 2 Module with Intel® Core™ i7/i5/i3 Processor and QM77 Chipset, the Express-IBE2. The Express-IBE2 is a COM Express® COM.0 R2.1 Type 2 module with a 3rd Generation Intel® Core™ i7/i5/3 processor and support for error-correcting code (ECC) memory. Based on the latest Mobile Intel® QM77 Express Chipset, the Express-IBE2 is specifically designed for customers who need a highly reliable platform and/or continued support for PCI-bus and PATA IDE in a long product life solution. The Express-IBE2 features the Intel® Core™ i7/i5/i3 processor supporting Intel® Hyper-Threading Technology (up to 4 cores, 8 threads) and DDR3 dual-channel memory at 1066/1333/1600 MHz with error-correcting code (ECC). Integrated HD Graphics 4000 includes features such as OpenGL 3.1, DirectX11, Intel® Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA) support for full AVC/VC1/MPEG2 hardware decode. Graphics outputs include VGA, LVDS and SDVO. In addition to the onboard integrated graphics, a multiplexed PCI Express® x16 Graphics bus is available for discrete graphics expansion or general purpose x8 or x4 PCI Express® connectivity. The Express-IBE2 features a single onboard Gigabit Ethernet port, eights USB 2.0 ports, two SATA 6 Gb/s ports, two SATA 3 Gb/s ports and one PATA IDE port. Support is provided for SMBus and I2C. The module is equipped with an SPI AMI EFI BIOS and supports SEMA (Smart Embedded Management Agent). SEMA functionality is consistent over ADLINK"s whole COM product line and provides the following embedded features : BIOS failsafe, voltage/current/temperature monitoring, power sequence control and monitoring, watchdog control, board info and statistics. SEMA comes with extensive software and library support for Windows, Linux, VxWorks and QNX. The ADLINK Express-IBE2 computer-on-module with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. The Express-IBE2 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities.
Q7-BW Q7-BW Qseven Standard Size Module with Intel® Pentium™ and Celeron™ Processor N3000 Series SoC Qseven is a Computer-on-Module (COM) standard for small sized and highly integrated systems adopted by SGET. The Qseven concept is an off-the-shelf, multi-vendor, Computer-on-Module that integrates all the core components of a common PC and is mounted onto an application specific carrier board. Qseven modules have a standardized form factor of 70 mm x 70 mm or 40 mm x 70 mm and have specified pinouts based on the high-speed MXM connector, regardless of the vendor. The Qseven module provides the functional requirements for an embedded application, which include, but are not limited to, graphics, audio, mass storage, network and multiple USB ports. A single ruggedized 230 pin MXM connector provides the carrier board interface to carry all the I/O signals to and from the Qseven module. This MXM connector is a well-known and proven high-speed signal interface connector that is commonly used for -PCI Express graphics cards in notebooks. The Qseven footprint is smaller than that of COM Express, ETX or XTX, responding to system designers" needs for minimal space. Qseven"s power consumption envelope is below a 12 watts target, whereas SMARC"s target is below 6 watts and COM Express can be well above 20 watts. Therefore, Qseven designs provide mid-range power values between those of SMARC and COM Express. The Qseven pincount is 230 compared to 314 and 440 for SMARC and COM Express (Type 2), respectively. Thus, it is optimized for designs with lower board-to-board pin requirements. The ADLINK Q7-BW computer-on-module with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. The Q7-BW is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities. ReadyBoard 910 ReadyBoard 910 Intel® Core™ i7/i5 EPIC Single Board Computer The Ampro by ADLINK™ ReadyBoard 910 integrates the 2nd Generation Intel® Core™ i7/i5/i3 and Celeron® processors (rPGA988B package, Socket G2) and Mobile Intel® HM65 Express Chipset, onboard SSD, networking and robust I/O in a compact EPIC form factor suitable for transportation, self-service, digital signage, and video surveillance applications.
Leaf Light Rugged HS Leaf Light Rugged HS Rugged USB/CAN interface with high performance Kvaser Leaf Light Rugged is a one channel USB interface for CAN. In hostile environments where dust and water are the norm, the IP67 rated housing assures reliable protection. Major features * IP67 rated lightwegiht aluminium housing * Polyurethane cabling for extreme environments * CAN messages are time-stamped with a precision of 100 microseconds * Handles up to 8000 messages per second * Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers * Supports data and remote frames * Detects error frames * Very good EMC performance * Fully compatible with all higher layer protocols including J1939 and CANopen * Equipped with a 110 cm (44 in.) long USB cable and a 30 cm (12 in.) long CAN cable * Interfaces the CAN bus with a 9-pin D-SUB connector * Galvanically isolated CAN bus driver * Designed for USB 2.0, backward compliant with USB 1.1 * Low power-consumption * Temperature range -40 °C - +85 °C * Quick and easy Plug-and-Play installation * 100% software compatible with applications written for all Kvaser hardware with Kvaser CANlib SDK * A practically unlimited number of Kvaser Leafs can be connected via standard USB hubs for simultaneous use on a single PC USBcan Professional USBcan Professional CAN/USB interface with two channels The Kvaser USBcan Professional provides two CAN bus interfaces through a single USB connection. When combined with the Kvaser Linx the Kvaser USBcan Professional also supports bus types like J1587. The Kvaser USBcan Professional supports Kvasers MagiSync technology to synchronize time stamps across multiple units without extra wires providing flexibility for multi-channel applications. With quick reaction times and high data throughput, the Kvaser USBcan Professional is perfect for rapid ECU re-flashing, advanced bus analyzers, and efficient development work. Major features of Kvaser USBcan Professional * One device for desktop and laptop. * Quick and easy plug-and-play installation. * Automatic and accurate clock synchronization between several Kvaser USBcan Professional interfaces through Kvaser MagiSync. The technical solution is unique and patented by Kvaser. * Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. * Support for Kvaser Linx J1587. * CAN Messages are time-stamped and synchronized with a precision of 2 microseconds. * Large on-board RAM buffer for CAN message. * Handles up to 40 000 messages per second. * Excellent error handling. * Supports silent mode for analyzing tools. * Galvanic isolation of the CAN bus driver stage to protect the hardware. * Labeled CAN channel for easy identification of the supported physical layer. * 100% compatible with applications written for all Kvaser hardware with KVASERs CANlib. * Interfaces the CAN bus with 9-pin D-SUB connectors or RJ45 connectors. * Designed for USB 2.0, backward compliant with USB 1.1. * A practically unlimited number of Kvaser USBcan Professional devices can be connected via standard USB hubs for simultaneous use on a single PC. * Driver support for major operating systems. * 100% compatible with applications written for Leaf, LAPcan, PCIcan, andPCcan with KVASERs CANlib. * Two high-speed channels with ISO 11898-2 compliant CAN transceivers, 10 kbit/s up to 1 Mbit/s. * Plastic housing with dimension W*L*H about 50*90*25 mm (approx 2 x 3,5 x 1 inch) Available models: USBcan Professional USBcan Professional RJ45
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters