MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Picasso SDI
Cost attractive Serial Data Interface (SDI) board
The picasso SDI is a high performance plug and play PC-card for the PCI-bus. It
enables each standard PCI system to acquire SDI image data and store YUV or
RGB images in system memory or full frame display of real-time video in a window.
aTCA-3100
24/48-Port AdvancedTCA Base
The aTCA-3100 series are the 24/48-port AdvancedTCA base/fabric layer 3 switch blades, based on Vitesse® VSC7310 switch silicon and Intel® 80219 600MHz XScale® I/O processor. The aTCA-3100, base switch blade, features 24-port 10/100/1000BASET links, including 12 node slots, 8 front panel egress RJ45 ports, 2 ShMC ports, 1 inter-switch port and 1 control plane CPU access port. In addition to all the aTCA-3100 features, the fabric switch blade, aTCA-3110 features 24-port 1000BASE-BX links, including 14 PIGMG 3.1 option 1 compliant node slots, 2 front panel egress ports and 8 reserved ports from Rear Transition Module I/O. The aTCA-3120, fabric switch blade with 10GbE uplink support, features an additional 10Gigabit Ethernet XFP uplink port above the aTCA-3110 feature set.
ComSync
Serial Communications Adapter
The Connect Tech Inc. ComSync/104 is a 2 channel Synchronous/Asynchronous Serial Adapter card for PC/104 Bus assemblies.
The card utilizes the features and functionality of the Zilog 85230
ESCC with an innovative I/O structure to provide the user with full
featured SYNC/ASYNC communications.
ACM/Flex-16
To satisfy your unique connectivity requirements, Connect Tech designed the ACM/Flex-16 to enhance the Intellicon-NT960 and NT960/PCI serial I/O subsystems. The ACM/Flex-16 brings our versatile "Flex" technology to the NT960, offering RS-232, RS-485 and Current Loop electrical interfaces.
cPCI-3920
3U cPCI SBC
3U CompactPCI® Intel® Core™2 Duo Processor with 3100 Chipset SBC.
aTCA-6900
AdvancedMC Carrier Blade
The aTCA-6900 features the latest Intel 5100/ICH9R chipset, with 64-bit dual dual-core LV-Xeon processors and DDR2-667 REG/ECC up to 16 GB support. For fabric interface connectivity, it supports dual IEEE802.3ap compliant 10GBASE-KX4 ports which are also backward compatible to 1000BASE-BX ports, compliant to PICMG® 3.1 option 9 and option 1. Two AMC.0 Mid-size, single width AdvancedMC bays support AMC.1 PCI-E, AMC.2 Gigabit Ethernet and AMC.3 SATA/SAS storage. On-board 24-port Gigabit Ethernet Switch-on-Chip provide high speed data tunnels switching among base / fabric interface, update channels, front panel egress ports, rear transition module and AMC.2 ports. Peripherals include USB v2.0 ports, analog RGB graphics, serial console and RAID 0/1/5 SATA/SAS AMC.3 storage devices.*
NuPRO-852
PICMG 1.0 Full-Size SBC
PICMG 1.0 Full-Size LGA775 Intel Core2 Duo SBC with DDR II, GbE, SATA II, & IDE.
NuPRO-965
PICMG 1.3 Full-Size SHB
PICMG 1.3 Full-Size LGA775 Intel Core2 Quad/Duo SHB with DDR II, Dual-GbE, SATA II, IDE.
Mercator
PC/104-Plus Expansion Module with Ethernet and Digital I/O
The Mercator PC/104 module integrates 2 PCI-based 10/100 Ethernet ports with 24 user-configurable digital I/O lines in the compact and rugged PC/104 format. This 2-in-1 combination of Ethernet and digital I/O can help lower the size and cost of your embedded system by eliminating one additional board from your PC/104 stack.
The Ethernet ports utilize the National Semiconductor DP83815 Mac + Phy PCI controller chip and are NE2000 compatible.
The 24 digital I/O lines are based on an 82C55 chip and feature programmable direction in 4- and 8-bit groups. All I/O lines contain user-configurable 10K Ohm pull-up resistors for convenience.
Extended temperature capability (-40 to +85ºC) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.
Diamond Systems offers appropriate mating cables for your convenience. Cable no. C-PRZ-02 provides a panel-mountable RJ-45 connector for the Ethernet, and cable no. C-26-18 is a 26-conductor ribbon cable for the digital I/O.
A low-cost version with one Ethernet port and no digital I/O is also available as model no. MRC-100-XT.
Emerald-MM-DIO
2 in 1
For users who need a higher level of integration than our standard products deliver, we offer this two-in-one board with 4 RS-232 serial ports, 48 digital I/O lines, and extended temperature operation.
Each serial port provides the standard set of PC serial port signals. The ST16C554 quad UART chip on board contains a 16-byte FIFO for each port and supports data rates of up to 115kbps. Interrupt sharing is fully supported among the four serial ports, and an interrupt status register enables the board to operate under Windows NT. Eight different address combinations are possible, and any of 11 different interrupt levels can be used.
The 48 digital I/O lines feature programmable direction on a line by line basis, and all lines have 10KOhms pull-up resistors. One group of 24 lines includes the additional feature of programmable edge detection. Both active line selection and edge polarity are programmable. Status registers indicate which, if any, lines have changed logic levels in the selected manner since the last status check. An interrupt can be generated on the PC/104 bus whenever the indicated activity occurs.
