MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
CoreModule 740
PC/104-Plus Single Board Computer with Intel Atom™ Processor witrh ICH8-M Chipset
The CoreModule 740 SBC is an exceptionally high integration, high performance, Intel® Atom™ N450 processor based system compatible with the PC/104 standard. This rugged and high quality single-board system contains all the component subsystems of an ATX motherboard plus the equivalent of several PCI expansion boards.
The Intel Atom N400 series CPUs integrate processor cores with Graphics and Memory Hubs (GMHs),providing low-power, high-performance processors, memory controllers for up to 512MB of onboard SDRAM memory, and graphics controllers which provide LVDS and VGA signals for most LCD video panels.
The ICH8-M chipset provides controllers for the I/O Hub (Southbridge) featuring two USB ports, one Ultra DMA 33/66/100 IDE port supporting two IDE devices, and one PCI port. The CoreModule 740 provides legacy interfaces through the SMSC SCH3112I-NU Super I/O featuring two serial ports, one parallel port, PS/2 keyboard and mouse ports, and one floppy port.
The CoreModule 740 can be expanded through the PCI expansion bus using the PC/104 and PC/104-Plus connectors for additional system functions. This bus offers compact, self-stacking, modular expandability.
The PC/104 bus is an embedded system version of the signal set provided on a desktop PC¡¦s ISA bus. The PC/104-Plus bus includes this signal set plus additional signals implementing a PCI bus, available on a 120- pin (4 rows of 30 pins) PCI expansion bus connector. This PCI bus operates at a clock speed of 33MHz.
The CoreModule 740 is particularly well suited to either embedded or portable applications and meets the size, power consumption, temperature range, quality, and reliability demands of embedded system applications. It can be stacked with ADLINK MiniModules™ or other PC/104-compliant expansion modules, or it can be used as a powerful computing engine. The CoreModule 740 requires a single +5V AT power source.
Xtreme/GPU
High End Graphics Unit
Connect Tech’s Xtreme/GPU brings exceptional desktop‑level graphics, outstanding multimedia features, and GPU processing power to the PCIe/104 form factor; with the ability to select either AMD or NVIDIA graphical solutions.
Connect Tech’s AMD version of the Xtreme/GPU is a high end graphics unit, used to drive up to four Mini DisplayPort connections for either independent use, or leveraging AMD Eyefinity technology, as a single large surface. On-board passive circuitry allows for the use of Dual-Mode DisplayPort, enabling the use of DVI or HDMI dongles if DisplayPort is not preferred.
With Connect Tech’s NVIDIA solution, the Xtreme/GPU transforms into a processing powerhouse. With access to the NVIDIA CUDA Cores, the GPU can become a parallel computational CPU for non-graphical applications.
Titan/cPCI Rear I/O - Rear I/O Opto
CompactPCI
These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability.
Titan/cPCI
CompactPCI
Following a tradition of producing cost-effective serial cards while maintaining high performance and quality, Connect Techs Titan offers a number of features on its small, 3U CompactPCI form factor. This flexible adapter board includes 2 or 4 ports of jumper selectable RS-232 or RS-485 configuration, the option for front or rear I/O, and support for all of the most popular operating systems, including Windows XP, Windows 2000 and Windows Server 2003.
BlueStorm/LP RS-485
RS-422/485 adapter
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-422/485 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner.
The BlueStorm/LP supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) full duplex communications of multi-drop devices.
Available with surge suppression or without and DB-9 male cables, the boards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility.
The BlueStorm/LP comes in 2, 4 and 8 port RS-422/485 models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 models.
BlueStorm/LP RS-232
RS-232 adapter
The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-232 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 921.6 Kbps ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner.
Available with or without surge suppression and DB-9 male cables, the PCI serial cards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility.
The BlueStorm/LP comes in 2, 4 and 8 port RS-232 serial interface models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 serial interface models.
Titan/104-Plus
PC/104-Plus Serial Communications
The Titan/104-Plus combines the best in performance and design of full sized PCI bus devices with the rugged and compact form factor of PC/104.
Fully 2.3 and PC/104‑Plus 2.0 compliant, the modular Titan/104-Plus cards include a PC/104 pass-through connector option for compatibility with legacy PC/104 cards.
Titan/104-Plus offers independent port configuration for baud rate and data bit options of 5, 6, 7, 8 and 9, as well as, 1, 1.5 and 2 stop bits. Select between odd and even parity.
The Titan/104-Plus is perfect for embedded applications such as industrial PCs, kiosks, military systems, aerospace, medical systems, POS devices and any system requiring fast data transfer speeds within a rugged form factor. These self-stacking cards are low on power consumption and function well in industrial environments.
Memorator R SemiPro
2-channel CAN to USB interface and standalone data logger
Kvaser Memorator R SemiPro is an advanced, rugged, two channel CAN (controller area network) to USB interface and standalone data logger — two products in one! To ruggedize the design, Kvaser has soldered the SD card to the PCB to make sure it works error free even when exposed to vibration and shocks. Galvanic isolation and an aluminium housing complete the package.
In standalone mode, this device logs data to an SD card, whilst in interface mode, it connects the CAN bus to the PC via USB. Connect this datalogger to a PC to configure baud rates, trigger conditions and filters using the Kvaser Memorator Tools software, included.
Major Features
One device for desktop and laptop, combining a standalone CAN bus data logger and a USB CAN bus interface.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
CAN messages are time-stamped with 2 microseconds resolution.
Large on-board RAM buffer for CAN messages.
Two high-speed CAN channels (compliant with ISO 11898-2), 10kbit/s up to 1 Mbit/s.
Galvanic isolation to protect the hardware.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated with five externally visible LEDs.
Driver support for major operating systems.
Support for Kvaser Linx J1587.
IP65 rated lightweight aluminium housing protects against dust and moisture.
Filters
Log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger’s falling or rising edge, and I/O signals.
Pre- and post-triggers are available without buffer size restrictions, limited by disk space only.
Filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged.
Support for pass as well as stop filters.
Create a counting pass filter to have a message logged at enumerated occurrence.
Handles up to 20,000 msgs/s in standalone logger mode.
External digital output that can drive an LED or a buzzer.
Less than 250 ms boot up time.
Supports Silent Mode — Log bus traffic safely without interfering and «listen-only» mode for bus analysis tools.
Memory Cards and Functions
One fixed 4GB memory card.
Set up several devices in a daisy chain for larger logging capacity.
Upload logged data via USB at 1.2 MB/s when connected via USB 2.0 HiSpeed.
Configuration Software in the PC
Easy to use graphic configuration tool — Memorator Tools.
Configuration of the CAN controller, i.e. bit rate and filters.
Configuration of the trigger conditions.
Configuration of filter for messages to be stored.
Configuration upload and download via USB.
Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task.
Software
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.
On-line documentation in Windows HTML-Help and Adobe Acrobat format.
USBcan II HS/SWC
2-channel CANbus interface for USB 1.1 and 2.0
The Kvaser USBcan II HS/SWC is a two-channel CANbus (controller area network) interface for USB 1.1 and 2.0. One channel is configured for High Speed CAN (ISO 11898-2); the second channel configure for Single-Wire CAN (SAE J2411). A flexible way to connect your desktop or laptop to the CANbus.
Major Features:
Two channel CAN bus interface through a standard USB interface.
One High Speed CAN channel (ISO 11898-2), and one Single Wire CAN channel (SAE J2411).
Supports 11 bit (CAN 2.0A) as well as 29 bit (CAN 2.0B) identifiers.
Native USB 1.1 support, forward compatible with USB 2.0 in full-speed mode (i.e. 12 Mbit/s).
Contains the powerful Mitsubishi M16C microcontroller, with two built-in CAN controllers.
Remote frames can be sent and received without restrictions.
Detect and generate error frames on the CAN bus.
Auto Transmit for placing messages on the bus at set intervals.
Software:
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.
On-line documentation in Windows HTML-Help and Adobe Acrobat format.
USBcan II HS/LS
2-channel CANbus interface for USB 1.1 and 2.0
The Kvaser USBcan II HS/LS is a two-channel CANbus (controller area network) interface for USB 1.1 and 2.0. One channel is configured for High Speed CAN (ISO 11898-2); the second channel configure for Low Speed or "fault tolerant" CAN (ISO 11898-3). A flexible way to connect your PC to the CANbus.
Major Features:
Two channel CAN bus interface through a standard USB interface.
One High Speed CAN channel (ISO 11898-2), and one Low Speed CAN channel (ISO 11898-3).
Supports 11 bit (CAN 2.0A) as well as 29 bit (CAN 2.0B) identifiers.
Native USB 1.1 support, forward compatible with USB 2.0 in full-speed mode (i.e. 12 Mbit/s).
Contains the powerful Mitsubishi M16C microcontroller, with two built-in CAN controllers.
Remote frames can be sent and received without restrictions.
Detect and generate error frames on the CAN bus.
Auto Transmit for placing messages on the bus at set intervals.
Software:
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.
On-line documentation in Windows HTML-Help and Adobe Acrobat format.
