MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Mini PCI Express 2xHS
Mini PCI Express add-on board with 2 high speed CAN channels
Measuring 30 x 51mm, the Kvaser Mini PCI Express 2xHS is a highly integrated CAN (controller area network) add‑on board that adds two high speed CAN channels to any standard computer board with mini PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, the small form factor board fits any embedded data acquisition systems, but is particularly suitable for fleet management to monitor key parameters such as fuel economy, engine speed, braking and accelerator pressure, and gearshift patterns.
PCIcanx II
CAN/PCI interface boards with 1 or 2 channels
Kvaser PCIcanx II is a high-performance CAN/PCI interface board and comprises two members: PCIcanx II HS/HS and PCIcanx II HS. Kvaser PCIcanx II HS is delivered with a free of charge low profile bracket. The Kvaser PCIcanx II boards fits in both PCI-X and PCI bus systems. Galvanically isolated CAN bus drivers to protect the hardware.
Hardware Specifications
* Compliant with PCI 2.3
* The board fits in both 3.3V PCI-X and 3.3V and 5V PCI busses
* Fully software compatible with the discontinued PCIcan II boards
* On-board 16-bit microcontroller
* Dimensions 120 x 95 mm (approx. 4.5 x 4 in.)
* Communicates with the PC through a fast DPRAM
* Quick and easy plug-and-play installation - no switches.
* CAN Controller: Renesas M16C
* Supports CAN 2.0 A and 2.0 B (active)
* High-speed ISO 11898 compliant driver circuits, supports bit rates up to 1 Mbit/s
* Industry-standard 9-pin D-SUB connectors
* Pin assignment according to CiA-DS102
* CAN oscillator frequency: 16 MHz
* Galvanic isolation between the CAN-controller and the CAN-driver
* The Kvaser PCIcanx II family boards can optionally be delivered with exchangeable CAN drivers, supporting e.g. single-wire CAN.
DB9-Power Inlet
Power injector with one female and one non‑connected male D-SUB9 connector
Kvaser DB9-Power Inlet is a power injector for CAN buses from a DC power jack into one female D-SUB9 connector. The Kvaser DB9-Power Inlet also has one unpowered male D-SUB9 connector for connecting to the CAN network. The Kvaser DB9-Power Inlet provides a simple and safe way to supply Kvaser interfaces on a development board, as well as powering interface devices without internal power, such as Kvaser’s Blackbird and Memorator series.
Major Features:
Acts as a power injector with one female and one non-connected male D-SUB9 connector
Connects to power supply using a standard 2.0 mm DC power connector.
A complementary 12 V, 1 A power supply is included
Kvaser SD cards
Industrial Grade SD cards
These high speed SD cards are perfect for your data logging needs. These industrial grade cards have been verified by Kvaser to work with the Kvaser Memorator product family.
OBD II to Dsub9 Adapter
OBD II to Dsub9 Adapter Cable
A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a DSUB9 female connector to any vehicle with an OBD II (J1962) connector. Supports K-Line.
Major Features
Molded OBD II (SAE J1962) male connector, for Type A (12 Volt) as well as Type B (24 Volt).
Molded 9 pin DSUB female connector with thumbscrews.
2500 mm (approx. 8 ft) long cable made of durable thermoplastic rubber.
Designed for Kvaser’s High-Speed, Low-Speed and Single-Wire CAN interfaces.
Perfect for Kvaser Memorator, Kvaser Leaf Professional, etc.
Supports K-Line.
Kvaser Q-cable
Interface accessory
Interface accessory for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards.
Kvaser Q-cable LSZH
Interface accessory
Interface accessory for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. Kvaser Q-cable LSZH (Low Smoke Zero Halogen) - protects people and equipment from toxic and corrosive gasses.
Kvaser OBD II Extension Cable
Interface accessory
A Kvaser OBDII Extension Cable is an extension cable with a male to female OBD II connector (EAN Numbers 73-03130-00301-9 and 73-03130-00347-7), or connects any Kvaser CAN bus interface with a 9 Pin DSUB connector to a vehicle with an OBD II (J1962) connector (EAN Numbers 73‑03130‑00348‑4 and 73-03130-00349-1).
Ordering information
EAN Number: 73-03130-00347-7
OBD II (SAE J1962) connector (male - female). Length 2500 mm (98.4in.).
EAN Number: 73-03130-00301-9
OBD II (SAE J1962) connector (male - female). Length 5000 mm (196.9in.).
EAN Number: 73-03130-00348-4
OBD II (SAE J1962) male connector - 9 pin DSUB female connector. Length 10000 mm (393.7in.).
EAN Number: 73-03130-00349-1
OBD II (SAE J1962) male connector - 9 pin DSUB female connector. Length 15000 mm (590.6in.).
FlexTainer
EPIC, MITX, EBX Enclosure
The FlexTainer is a rugged enclosure system for packaging EPIC, EBX, or Mini-ITX CPU payloads. It is constructed of .125″ aluminum and designed for hostile and mobile environments. The FlexTainer features a dual system of shock and vibration isolation: The CPU payload is mounted horizontally in the enclosure with two internal rubber corner rails to absorb high-frequency vibrations, while the entire enclosure is mounted on the host platform with a thick rubber pad which absorbs low-frequency G-forces. The rubber pad may be removed for optional mounting solutions such as hard mounting, flange endcap, or fluidic mount assembly.
Advantages
Dual shock and vibration protection system
EPIC, Mini-ITX, and EBX mounting
Passively cooled
Easily customized: length, coating, etching, milling, mounting
6036-T5 extruded aluminum
high grade extruded rubber
available in standard lengths:
4.55″ (EPIC), 6.75″ (Mini-ITX) and 10″ (EBX)
RoHS compliant
TS-I2C
I2C remote temperature sensor
The TS-I2C is designed to interface directly with HESC type power supplies, providing remote temperature monitoring.
