BlackBird v2
BlackBird v2 Wireless USB/CAN PC interface Yet more powerful and versatile a WLAN solution than Kvaser’s original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip that gives it up to 75% better range. In addition, more onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2’s ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. Based on radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2’s API is device independent and so can be used on a tablet or smartphone, as well as PC. Major features: - WLAN version 802.11b/g/n - Responds to increased market demand for iOS and Android API with a device independent http based REST API - 100% software compatible with applications written for all Kvaser hardware with free Kvaser CANlib SDK - Up to 75% better range - Works in AdHoc and Infrastructure mode - Lightweight but highly rugged aluminum housing - Polyurethane cabling suitable for extreme environments - Galvanic isolation of the CAN bus driver stage to protect the hardware - Interfaces the CAN bus with a standard D-SUB connector - Configured by USB connection - Can be used as a wired interface - Operating voltage CAN bus (7 — 40 V DC) - Messages are time-stamped and synchronized with a precision of 25 microsecond - Supports 11-bit and 29-bit identifiers - Comes with free, first class technical support
Ethercan Light HS
Ethercan Light HS Ethernet-CAN PC interface The Ethercan Light HS is a fully-equipped interface with a large on-board RAM buffer and full compatibility with J1939, CANopen, NMEA 2000 and DeviceNet. Simple to set up using the standard Kvaser API, in contrast to many of the CAN to Ethernet gateways on the market, this provides a simple, inexpensive one CAN-channel to Ethernet interface for Windows-based PCs. Major features of the Ethercan Light HS: - High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s - Ethernet connection has auto-MDIX, so it automatically detects and adjusts for Ethernet cable being used - Built-in Power over Ethernet (PoE) — receives data and power over the Ethernet cable - Small, lightweight plastic housing with galvanic isolation - Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib
USBcan Light 2xHS
USBcan Light 2xHS USB-CAN PC interface The Kvaser USBcan Light 2xHS offers two high speed CAN channels and one USB 2.0 compliant interface. With the three connectors at the end of fully galvanically isolated flexible wires, this device is designed to facilitate any application in which the CAN bus connectors aren’t easily accessible, such as hard to reach electronic control units (ECU) on a vehicle. USBcan Light 2xHS is supplied with CANlib, the software API that is common to all Kvaser hardware. Taking just 30 seconds to programme once you have Canlib downloaded on the host computer, USBcan Light 2xHS is simple to install and configure. Major features of the USBcan Light 2xHS: - One USB 2.0 compliant device provides easy access to two CAN busses - Quick and easy plug-and-play installation. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers - 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib - High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.
Mini PCI Express 2xHS v2
Mini PCI Express 2xHS v2 Dual channel mini PCI Express CAN interface The Kvaser Mini PCI Express 2xHS v2 is a small (30×51mm), yet advanced, real time CAN interface that adds two high speed CAN or CAN FD channels to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs. Major Features Fully compliant to the PCIe bus specification 1.2, Type F2 form factor (Full-Mini with bottom-side keep outs) High-speed CAN connection (compliant with ISO 11898-2), supporting a bit rate from 50 to 1000 kbit/s for Classical CAN and up to 8Mbit/s for CAN FD High transmission rate of up to 20000 messages/s on each channel Time stamp accuracy of 1 µs Galvanic isolation Suitable for industrial environments Low profile mini PCI Express-compliant 7-pin Molex connector provides CAN channel access Includes Molex to DSUB9 cable adapter Complies with EN 61000-6-2:2005, specifying EMC immunity for industrial environments Operates over the industrial temperature range of −40 to +85°C Kvaser’s free of charge CANLIB SDK can be used to develop software for the Mini PCI Express HS board. Windows DLL library and examples included. Supports Windows Vista or later Linux drivers and a dedicated SDK are available as a separate download Support for SocketCAN, see elinux.org for details Note: Kvaser’s already-existing Kvaser Mini PCI Express HS and Kvaser Mini PCI Express 2xHS products will remain available for sale. The primary difference is that these previous versions utilize the USB system bus for communication with the PC. Software Documentation, Kvaser CANlib SDK and drivers can be downloaded for free at www.kvaser.com/downloads Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Visual Basic, Python and t Script All Kvaser CAN interface boards share the common software API, CANLib SDK. Programs written for one interface type will run without modifications on the other interface types. J2534 Application Programming Interface available RP1210A Application Programming Interface available HTML-Help and online documentation in Windows and Linux
USBcan Pro 2xHS v2 CB
USBcan Pro 2xHS v2 CB Dual channel USB-CAN interface with CAN FD support The USBcan Pro 2xHS v2 CB is a bare circuit board version of Kvaser’s USBcan Pro 2xHS v2 dual channel CAN or CAN FD interface with scripting capability. The USBcan Pro 2xHS v2 CB is supplied ’bare board’ i.e. without a housing, and can thus be built into any system. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device. Feature List Supports CAN FD Quick and easy plug-and-play installation Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers Power derived from the USB connection, CAN or an in-built power supply Galvanic isolation High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware Simultaneous operation of multiple devices Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Units are shipped with Kvaser TRX, a lightweight development environment Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator Pro 2xHS v2 CB
Memorator Pro 2xHS v2 CB Professional-level, dual channel CAN bus interface and standalone data logger Kvaser Memorator Pro 2xHS v2 CB is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Configurable using Kvaser’s Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 CB is CAN FD compliant. Major Features: Monitor two CAN channels simultaneously using just one device Log data to an expandable SD card slot Supports CAN FD up to 8Mbit/s (with proper physical layer implementation) Script functionality allows users to develop customised t-script applications written in the Kvaser t programming language Power derived from the USB connection, CAN or an in-built power supply Supports silent mode for analysis tools — listens to the bus without interfering Detection and generation of error frames and remote frames LED lights alert user to device status, including signalling a full SD card or card error Galvanically isolated CAN bus drivers Automatically time synchronises the data transmitted and received across both buses Built-in Kvaser MagiSync™ technology time synchronises with other Kvaser interfaces connected to the same PC, resulting in simpler and more accurate multichannel data capture Extended operating temperature range from −40 to 85 °C NOTE: Product ships with Commercial Grade SD card (-25 to +85°C). Industrial Grade SD cards (-40 to +85°C) are available for additional purchase. Contact us for details Compatible with J1939, CANopen, NMEA 2000® and DeviceNet Plug and play installation, and a comprehensive user guide to help make t script development quick and easy Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Java, Python and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Memorator Pro 5xHS CB
Memorator Pro 5xHS CB High-performance CAN bus interface and standalone datalogger Kvaser Memorator Pro 5xHS CB is a five channel, high performance, CAN (controller area network) bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. It is supplied ’bare board’ i.e. without a housing, and can thus be built into any system. The Memorator Pro 5xHS CB supports CAN FD. Configurable using Kvaser’s Memorator Config Tool, Memorator Pro 5xHS CB is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied. The device is also supported in CANlib, Kvaser’s universal software development kit. Major Features Monitor 5 CAN channels simultaneously using just one device, or connect the USB cable with a single 9 pin DSUB for single CAN channel monitoring Automatically time synchronises the data transmitted and received across all five buses Built-in Kvaser MagiSync technology time synchronises with other Kvaser interfaces connected to the same PC, resulting in simpler and more accurate multichannel data capture Script functionality allows users to develop customised t-script applications written in the Kvaser t programming language Plug and play installation, and a comprehensive user guide to help make t script development quick and easy Log data to an expandable SD card slot LED lights alert user to device status, including signalling a full SD card or card error Power derived from the USB connection, CAN or an in-built power supply Compatible with J1939, CANopen, NMEA 2000® and DeviceNet Supports CAN FD Filters Log continuously, or logging can be triggered by creating advanced triggers based on messages, data signal values, error messages, external trigger’s falling or rising edge, and I/O signals Pre- and post-triggers are available without buffer size restrictions, limited by disk space only Filter out selectable messages and/or signals to be logged. The identifiers can be picked from a database, or all messages can be logged Support for pass as well as stop filters Create a counting pass filter to have a message logged at enumerated occurrence Handles up to 20,000 msgs/s in standalone logger mode External digital output that can drive an LED or a buzzer Supports Silent Mode — Log bus traffic safely without interfering and «listen-only» mode for bus analysis tools Memory Cards and Functions Supports SD and SDHC memory card formats Set up several devices in a daisy chain for larger logging capacity Configuration Software in the PC Easy to use graphic configuration tool — Memorator Tools Configuration of the CAN controller, i.e. bit rate and filters Configuration of the trigger conditions Configuration of filter for messages to be stored Configuration upload and download via USB Using the included Kvaser Dispatcher software, a complete measurement setup can be turned into a self-installing package that is sent to a remote location to carry out a specific logging task Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available RP1210A Application Programming Interface available On-line documentation in Windows HTML-Help and Adobe Acrobat format
Leaf Light HS v2 CB
Leaf Light HS v2 CB CAN to USB interface The Leaf Light v2 CB is the bare circuit board version of Kvaser’s popular Leaf Light v2 interface — a single‑channel, high speed, USB-to-CANbus interface. Having made its name as the work-horse of USB to CAN interfaces, Kvaser’s Leaf Light product series provides reliable, low cost connection to the PC. Major Features The Kvaser Leaf Light HS V2 CB is a high speed USB interface for CAN that offers loss free transmission and reception of standard and extended CAN messages on the CAN bus. Both USB and CAN are connected using 6-way connectors and mate with Molex 51021 PicoBladeTM (e.g. housing 51021-0600 and terminal 50079-8000). 8000 messages per second, each time-stamped with 100 microsecond accuracy. Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers. High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. Galvanic isolation, enhancing protection from power surges or electrical shocks. Local buffering and preprocessing results in high performance and a reduction of time critical tasks for the PC. Software Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads. Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic. All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types! J2534 Application Programming Interface available. RP1210A Application Programming Interface available. On-line documentation in Windows HTML-Help and Adobe Acrobat format.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters