Xtreme I/O Opto
Xtreme I/O Opto PCI-104 Digital I/O board Connect Tech’s Xtreme I/O Opto is a 48-bit isolated PCI‑104 Digital I/O board grouped with 24 optically isolated inputs and 24 optically isolated outputs. The flexibility of the FPGA technology allows integration and customization to meet application requirements. Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system. The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.
Xtreme/104-Plus 16 Port
Xtreme/104-Plus 16 Port PC/104-Plus serial card Connect Tech’s Xtreme/104-Plus 16 Port offers 16 ports of switchable RS-232/422/485 on a single PC/104-Plus card. This provides the highest port density and most flexible PC/104-Plus serial port solution available. Dependability, high speed data transfer rates, and high density makes the Xtreme/104-Plus 16 Port a must where space is at a premium. The Xtreme/104-Plus 16 Port is ideally suited for embedded systems where high serial port count and a small footprint is required. Example markets are remote submersibles, remote aerial or land vehicles, remote monitoring stations, or anywhere that high serial port density is required.
BlueStorm/Express Opto
BlueStorm/Express Opto PCI Express x1 Lane serial card An extension of Connect Tech’s PCI Express product family, the BlueStorm/Express Opto offers dependability and high speed data transfer rates along with 3kV optical isolation. This added protection makes PCI Express Opto cards ideal in environments where harsh conditions may disrupt communications. Available with four ports of RS-232/422/485 connectivity, these PCI Express x1 lane cards are compatible with x1, x4, x8, x16 lane PCI Express slots. Upgrading a PCI system to the more efficient PCI Express requires a hardware change only as your new PCI Express system is backwards compatible with PCI software. Bi-directional data speeds up to 1.8432 Mbps ensure fast data acquisition and communications. PCI Express lets you experience more responsiveness while reducing the load on your network. All Connect Tech PCI Express cards are FCC certified and CE marked.
BlueStorm/Express Isolated
BlueStorm/Express Isolated PCI Express x1 Lane serial card An extension to the BlueStorm/Express product family, the lBlueStorm/Express Isolated offers dependability and lhigh speed data transfer rates along with 2kV isolation. This protection makes PCI Express cards ideal in environments where harsh conditions may disrupt communications. Available with 4 or 8 ports of RS-232/422/485 connectivity, these BlueStorm/Express Isolated x1 lane cards are compatible with x1, x4, x8, x16 lane PCI Express slots. Bi-directional data speeds up to 7.8 Mbps (RS-422/485) ensure fast data aquisition and communications. Experience more responsiveness while reducing the load on your network.
SSD/104 SATA
SSD/104 SATA Complete rugged stackable SSD and storage solution Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage solution improves performance, expands storage capacity and reduces overall storage footprint in an embedded system. Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and storage solution can be easily upgraded to accommodate future generations of mSATA modules for even greater system capacity and performance. When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using standard 7-pin SATA. SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a separate mSATA carrier which supports any mSATA SSD module.
Xtreme/GbE 8/12-port
Xtreme/GbE 8/12-port PC/104 Compliant Managed Carrier Ethernet Switch Connect Tech’s Xtreme/GbE Managed Carrier Ethernet Switch provides Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor. Excellent for high-end applications such as Mobile and Microwave backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system. Powered by the latest generation Carrier Ethernet Switch engine the Microchip VSC7428/VSC7429. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2 external memory and DMA-based frame extraction and insertion support timing over packet, Ethernet OAM, and performance monitoring. Available in models with RJ-45 or Rugged Positive Locking Headers, making this embedded Ethernet switch ideal for any type of environment.
Xtreme/PSU Isolated
Xtreme/PSU Isolated PC/104 Compliant Isolated Power Supply Connect Tech’s Xtreme/PSU Isolated power supply is a high efficiency, high powered Isolated PC/104 form factor power supply with extended temperature capabilities. Xtreme/PSU Isolated provides isolated power to on-board terminal block connectors and also directly powers all of the PC/104 family expansion buses such as PC/104, PC/104-Plus, PCI-104, PCI/104-Express and PCIe/104. Xtreme/PSU Isolated is a highly reliable power supply which provides up to 195W of total output power with +3.3V, +5V, and +12V output voltages. It can be used as a stand-alone power supply to power any other embedded system, or used directly to power any PC/104 stack or single board computer (SBC). Xtreme/PSU Isolated power supply has a wide input voltage range that accepts +9V to +36V DC and is specifically designed for use in a broad range of rugged applications including military, industrial, and air and ground vehicles. Xtreme/PSU Isolated power supply can be used in combination with Connect Tech’s stackable CPU and expansion boards for a total design solution.
SMARC 2.0 Carrier
SMARC 2.0 Carrier Extremely small SMARC carrier board Connect Tech’s SMARC 2.0 carrier is an extremely small SMARC carrier board ideal for low power IoT applications as users can take advantage of the integrated on-board wireless capabilities found on the SMARC 2.0 modules. The carrier has USB 3.0, USB 2.0, 2x MIPI CSI-2 camera interfaces, HDMI outputs, and expansion via 2x miniPCIe Full Sized slot. Connect Tech’s SMARC 2.0 carrier board supports the latest generation Apollo Lake x86 low-powered processors and exposes next-generation interconnect (USB 3.0, DDI, MIPI-CSI-2). SMARC 2.0 supports an extended temperature range of -40°C to +85°C and offers a very small footprint; ideal for mobile or stationary applications.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters