MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Picasso FI-mm/sm
Opticlink fiber interface
With the picasso FI long haul digital video acquisition is possible. The picasso FI
framegrabber models are plug and play PC-cards for the PCI-bus and provide highresolution
image capture for digital video cameras via a fiber optics interface. It enables
each standard PCI system to capture and store single images for image processing or
full frame display of digital video in a window. The FI models operate as PCI-bus
master and transfer images directly to the system memory without impacting the
processor.
Model 617
JPEG Frame Grabber
Model 617 combines the functions of a 16 x 4 video crosspoint switch, a frame grabber, hardware JPEG compression and digital I/O into one PCI board.
The 617 accepts sixteen composite video inputs and routes any four of them to separate video decoders for digitizing. The use of four decoders eliminates losing frames during channel switching. At least two decoders are always in sync and ready for the JPEG compression circuit.
The 617 uses multiple frame buffers to interlace full size images before they are compressed. This allows the 617 to generate just one compressed image per frame instead of two per interlaced frame.
Frame rates
Each of the four decoders digitizes 30 frames per second to give an overall board throughput of 30 fps for 640 x 480 interlaced frames. These throughputs include JPEG compression. If all sixteen channels are used the frame rate per channel is 1.8 fps.
Number of Cameras
NTSC frames/sec
PAL frames/sec
1
30
25
2
15
12.5
4
7.5
6.25
8
3.75
3.12
16
1.88
1.56
Hardware compression
Model 617 executes hardware JPEG compression to greatly reduce the amount of memory needed to store images. Hardware compression reduces the CPU and PCI bus loading.
Multiple boards
Sensorays software supports multiple 617s in the same PCI bus. For example, two 617’s may be used to expand the number of video inputs to thirty two. If sixteen inputs are distributed between two boards the overall capture rate increases to 3.7 fps per channel.
Real-time outputs
Any four of the sixteen inputs may be routed to four output channels for display on video monitors. A software-selectable switch after each buffer amplifier allows multiple 617’s to share the same video monitor.
Input Clamping
Each input channel has a clamping circuit to minimize the effects of switching from one floating camera signal to another. Image artifacts from a previous channel will not affect the current channel.
Text caption buffer The 617’s caption buffer allows overlaying text on each frame. The text is within a transparent box that may be positioned anywhere within the frame. The text size and color are programmable.
Special Output The 617 also supplies small-size uncompressed frames suitable for motion detection by the host computer. These are 128 x 96 pixels or 256 x 192.
Picasso SDI
Cost attractive Serial Data Interface (SDI) board
The picasso SDI is a high performance plug and play PC-card for the PCI-bus. It
enables each standard PCI system to acquire SDI image data and store YUV or
RGB images in system memory or full frame display of real-time video in a window.
aTCA-3100
24/48-Port AdvancedTCA Base
The aTCA-3100 series are the 24/48-port AdvancedTCA base/fabric layer 3 switch blades, based on Vitesse® VSC7310 switch silicon and Intel® 80219 600MHz XScale® I/O processor. The aTCA-3100, base switch blade, features 24-port 10/100/1000BASET links, including 12 node slots, 8 front panel egress RJ45 ports, 2 ShMC ports, 1 inter-switch port and 1 control plane CPU access port. In addition to all the aTCA-3100 features, the fabric switch blade, aTCA-3110 features 24-port 1000BASE-BX links, including 14 PIGMG 3.1 option 1 compliant node slots, 2 front panel egress ports and 8 reserved ports from Rear Transition Module I/O. The aTCA-3120, fabric switch blade with 10GbE uplink support, features an additional 10Gigabit Ethernet XFP uplink port above the aTCA-3110 feature set.
ComSync
Serial Communications Adapter
The Connect Tech Inc. ComSync/104 is a 2 channel Synchronous/Asynchronous Serial Adapter card for PC/104 Bus assemblies.
The card utilizes the features and functionality of the Zilog 85230
ESCC with an innovative I/O structure to provide the user with full
featured SYNC/ASYNC communications.
ACM/Flex-16
To satisfy your unique connectivity requirements, Connect Tech designed the ACM/Flex-16 to enhance the Intellicon-NT960 and NT960/PCI serial I/O subsystems. The ACM/Flex-16 brings our versatile "Flex" technology to the NT960, offering RS-232, RS-485 and Current Loop electrical interfaces.
cPCI-3920
3U cPCI SBC
3U CompactPCI® Intel® Core™2 Duo Processor with 3100 Chipset SBC.
aTCA-6900
AdvancedMC Carrier Blade
The aTCA-6900 features the latest Intel 5100/ICH9R chipset, with 64-bit dual dual-core LV-Xeon processors and DDR2-667 REG/ECC up to 16 GB support. For fabric interface connectivity, it supports dual IEEE802.3ap compliant 10GBASE-KX4 ports which are also backward compatible to 1000BASE-BX ports, compliant to PICMG® 3.1 option 9 and option 1. Two AMC.0 Mid-size, single width AdvancedMC bays support AMC.1 PCI-E, AMC.2 Gigabit Ethernet and AMC.3 SATA/SAS storage. On-board 24-port Gigabit Ethernet Switch-on-Chip provide high speed data tunnels switching among base / fabric interface, update channels, front panel egress ports, rear transition module and AMC.2 ports. Peripherals include USB v2.0 ports, analog RGB graphics, serial console and RAID 0/1/5 SATA/SAS AMC.3 storage devices.*
