MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
PCIEcan 2xHS v2
High speed CAN network card with 2 high speed CAN channels
Kvaser PCIEcan 2xHS v2 is a highly integrated, high speed controller area network (CAN) network card that adds two high speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.
Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
PCIEcan 4xHS
High speed CAN network card with 4 high speed CAN channels
Kvaser PCIEcan 4xHS is a highly integrated, high speed CAN network card that adds four high speed controller area network (CAN) channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small form factor add-on board fits many embedded data acquisition systems and is CAN-FD ready.
Features:
CAN FD ready
Quick and easy plug-and-play installation
Supports High Speed CAN (ISO 11898-2)
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
Low profile card (86×69mm) allows ultra-compact systems
Implements Kvaser's CAN IP in an FPGA, resulting in high max message rate
Four CAN Hi-Speed channels in a single 26-pin HDD-SUB CAN connector
The HD26 splitter connects tothe CAN bus via four 9-pin DSUB connectors
Four yellow LEDs that indicate when a CAN message was received orsent
Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet
Supports silent mode for analysis tools listens to the bus without interfering
Detection and generation of error frames and remote frames
Designed for standard and industrial computers
Galvanically isolated CAN bus drivers
Wide operating temperature of 0°C to +85°C
Supports the Kvaser Linx
Software:
Documentation, software and drivers can bedownloaded for free atwww.kvaser.com/downloads
Kvaser CANLIB SDK isafree resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic
All Kvaser CAN interface boards share acommon software API. Programs written for one interface type will run without modifications onthe other interface types!
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
On-line documentation in Windows HTML-Help and Adobe Acrobat format
Kvaser OBD II Adapter Cable
Interface accessory
A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a 9 Pin DSUB connector to a vehicle with an OBD II (J1962) connector.
ICOP-2811
PC/104 VGA/LCD Module
The TP6508IQ is an advanced single-chip flat panel VGA controller. It’s used for small-size computer or notebook computer system with simple operation and powerful features. Also it contains all of the functions and supports logic required to implement the IBM VGA display standards and enhanced display modes on LCD, PLASMA, EL panel and TV display at register and BIOS level compatible.
A simultaneous display technology is implemented in TP6508IQ to be used for CRT/Flat panel, LCD/TV display. For minimum chip-count or board-space, it can design to complete a video subsystem with only one 256kx16 DRAM (512k Bytes). This video subsystem can support all panel type without any glue logic or external frame buffer.
AIM104-IN16
PC/104 16-channels Opto-Isolated Digital Input PC104 Module
The AIM104-IN16 is an 8-bit PC/104 module providing 16 opto-isolated inputs. The isolated supply may be sourced from either the on-board DC/DC converter or an external supply, so that there are two variants: the AIM104-IN16 and the AIM104-IN16-DC/DC. The board includes jumper options for each channel.
Valentino
Multi-channel Video Output Board Line
The Valentino Multi-Channel Video Output Boards output 2, 4 or 8 (depending the model) independent video output channels for analog PAL or NTSC video formats. Each video output channel is set to one of five video output modes (Composite, S-Video or Component [RGB/YUV] video) in software. To avoid PCI-bus load, the board is equiped with full frame video memories for each video output channel, that keep the latest refreshed image stored. TM The valentino boards are designed for the standard PCI-bus (32bit/33MHz). All video outputs are available by a standard HD 62-pins connector on the board bracket. Multiple "Multi-channel Video Output Boards" in one PC-system are allowed to extend the total number of video output channels for the computer system (256 boards theoretically). TM Each valentino board adds maximum 8 video output channels to the system. TM R R The valentino line is supported for Windows , Linux and QNX . For software developers open source application sample code is provided.
Picasso LS
Digital LVDS (RS-644) interface (optional RS-422)
With the picasso LS high speed digital video acquisition is possible. The picasso LS framegrabbers are high performance plug and play PC-cards for the PCI-bus and provide high-resolution image capture for digital video cameras. It enables each standard PCI system to capture and store single images for image processing or full frame display of digital video in a window. The LS models operate as PCI-bus master and transfer images directly to the system memory without impacting the processor.
Picasso CL
Digital CameraLink Base-16 interface
With the picasso CL high speed digital video acquisition is possible. The picasso CL framegrabbers are plug and play PC-cards for the PCI-bus and provide high resolution image capture for digital video cameras. It enables each standard PCI system to capture and store single images for image processing or full frame display of digital video in a window. The CL models operate as PCI-bus master and transfer images directly to the system memory without impacting the processor.
Picasso 3C/3Cpro
High performance RGB framegrabber
The picasso 3C/3Cpro is a high performance plug and play PC-card for the PCIbus. It enables each standard PCI system to capture and store single images for image processing or full frame display of real-time video in a window. A nice feature is the asynchrone frame reset option of this framegrabber. Contact ARVOO support for more information.
Picasso 2SQ
High performance color framegrabber
The picasso 2SQ is a high performance plug and play PC‑card for the PCI‑bus. It enables each standard PCI system to capture and store single images for image processing or full frame display of real-time video in a window.
