MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
USB-DIO-96
USB Digital Input/Output Module 96 or 48 Digital I/O’s
This USB board is an ideal solution for adding portable, easy-to-install digital I/O capabilities to any computer with a USB port. The board is a USB 2.0 high speed device, offering the fastest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The card is plug-and-play allowing quick connect/disconnect whenever you need additional I/O on your USB port.
The board features 96 or 48 bits of TTL-compatible digital I/O with high-current capabilities. Each digital port can be programmed to accept inputs or to drive outputs in twelve or six 8-bit ports. Power is supplied to the card via the USB cable, or for higher source current capabilities, an external power option may be ordered. The I/O wiring connections are via two or four industry standard 50-pin connectors. For external circuits, fused +5VDC power is available at pin 49 of each I/O connector. The resettable fuse is rated at 0.5A.
All I/O lines are buffered by a type 74ABT543A tristate buffer transceiver capable of sourcing 32 mA or sinking 64 mA. The buffers are configured under program control for input or output. Jumper selected resistors permit configuration of each 24-bit / 50-pin connector group for pull-up (to +5 VDC), pull-down (to ground) or floating depending on the application requirement. Pull-ups are useful for contact monitoring and assure that there are no erroneous outputs at power-up until the card is initialized by system software.
Unlike most USB digital I/O products which primarily use a human interface device (HID) driver, we provide an easy to use, Windows/Linux-based, custom function driver capable of updating all 96-bits approximately 4000 times per second.
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and pre-drilled mounting holes match the PC/104 form factor (without the bus connections). This ensures easy installation using standard standoffs inside most enclosures or systems. The board can be added to any PC/104, PCI-104, or PCI/104-Express stack by connecting it to a USB 2.0 port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-DIO-96 and USB-DIO-48 OEM board can also be installed using standoffs inside other enclosures or systems. For embedded OEM type applications, an additional miniature USB input header is provided in parallel with the type B connector.
Accessories
Available accessories include flat ribbon cables and DIN-rail mountable screw terminal boards. Also available is our low cost IIB-24 which will add optical isolation to any standard 24-channel digital I/O port on a 50 pin connector. To make use of the miniature embedded USB header connector, we offer a 6’ type A to mini cable.
Software
The USB-DIO-96 and USB-DIO-48 are plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a high-speed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of highspeed USB 2.0. These boards are supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/ XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs and includes example LabView VIs. Embedded OS support includes Windows XPe.
USB-DIO-32
Buffered Digital I/O, Three Counter/Timers
The USB-DIO-32 is an ideal solution for adding portable, easy-to-install digital I/O and counter capabilities to any computer with a USB port. The USB-DIO-32 is a USB 2.0 high-speed device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port.
The USB-DIO-32 features 32 bits of TTL-compatible digital I/O with high-current capabilities and three optional 82C54 counters. Each digital port can be programmed to accept inputs or to drive outputs on four 8-bit ports, designated as port A, B, C, and D. Power is supplied to the board via the USB cable or for higher current capabilities, external power may be used. The I/O wiring connections for USB-DIO-32 are via an industry standard 50-pin connector. For external circuits, fused +5VDC power is available at the connector. This resettable fuse is rated at 0.5A.
All I/O lines are buffered by a type 74ABT245 tristate buffer transceiver capable of sinking 64 mA or sourcing 32 mA. The buffers are configured under program control for input or output. Jumper selectable pull-ups (to +5 VDC) or pull-downs (to ground) on the board allow for contact monitoring and assure that there are no erroneous outputs at power-up until the board is initialized by system software.
The USB-DIO-32 is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom.
Factory options:
Three 82C54 counter/timers
External power for high current capabilities
DIN rail mounting provision
Economy «E» version also available without the screw terminal board
OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
Counter/timers
Three 82C54 chips each include three 16-bit counter/timers factory configured in an optimal module for use as event counters, frequency output, pulse width, and frequency measurement (see the Block Diagram).
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-DIO-32 OEM board can also be installed using standoffs inside other enclosures or systems.
Accessories
The USB-DIO-32 is available with optional cable assemblies and screw terminal board. The pin connections are also compatible with industry standard I/O racks such as ACCES A24A, OPTO22, Gordos, Potter & Brumfield, etc. with optional cable.
Software
The USB-DIO-32 is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a highspeed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-DIO-32 is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
USB-DA12-8A
8 Channel Arbitrary Waveform Analog Output
The USB-DA12-8A is an ideal solution for adding portable, easy-to-install analog outputs to any computer with a USB port. The USB-DA12- 8A is a USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The board is plug-and-play allowing quick connection whenever you need additional I/O on a USB port.
The USB-DA12-8A features 8 digital-to-analog converters (DACs) with both differential and single-ended outputs on separate connectors. The board features a variety of unipolar and bipolar ranges for each DAC giving the user a variety of options. The DACs can be updated individually or simultaneously. To ensure that there will not be excessive outputs to external circuits when the board is plugged in, automatic circuits limit analog outputs to zero volts. Power is supplied to the board via an external power supply which powers on board DC/DC converters which provide ±12V to the operational amplifiers on the board. The I/O wiring connections for USB-DA12-8A are via an industry standard, IDC type 26-pin, 16-pin, and 10-pin connectors.
The USB-DA12-8A is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships with or without a steel powder-coated enclosure with an anti-skid bottom.
Factory options:
Resistors in series with differential connector for impedance matching
DIN rail mounting provision
Economy ‘E’ version available without screw terminal board
OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-DA12-8A OEM board can also be installed using standoffs inside other enclosures or systems.
High Retention USB Connector
The ever-growing presence of USB in the industrial/military marketplace has driven the need for USB connections to be reliable, dependable, and unfailing. Gone are the days of loose USB connections. A type B USB connector is used on all USB/104 products which features a high retention design that complies with the class 1, Div II minimum withdrawal requirement of over 3 pounds of force (15 Newtons). This connector has an orange color-coded insulator to quickly differentiate it from standard USB connectors. Using these USB connectors increases reliability in your system and ensures a tight connection. For embedded OEM type applications, an additional miniature USB input header is provided in parallel with the type B connector.
Applications:
Portable
Laptop
Education
Laboratory
Industrial Automation
Embedded OEM
Accessories
The USB-DA12-8A is available with optional cable assemblies and screw termination boards.
Software
The USB-DA12-8A is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a high-speed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-DA12-8A is supported for use in most USB supported operating systems and includes a free Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
USB-AI16-16A
High Speed Multifunction 16-bit Analog Input
The USB-AI16-16A is an ideal solution for adding portable, easy-to-install high-speed analog and digital I/O capabilities to any computer with a USB port. The unit is a USB 2.0 high-speed device, offering the highest speed currently available with the USB bus. The USB-AI16-16A is a 16-bit resolution A/D board capable of speeds up to 500kHz for its 16 single-ended or 8 differential analog inputs. Each channel can be independently software configured to accept 8 different input ranges. Additionally, each channel includes its own analog ground pin on the I/O connector which is helpful in reducing noise. A unique, real-time internal calibration system allows the card to continually compensate for offset/gain errors giving a more accurate reading. The unit is plug-and-play allowing a quick connection whenever you need additional I/O on the convenience of a USB port.
This small, compact, multifunction I/O board provides the user with everything needed to start acquiring, measuring, analyzing and monitoring in a variety of applications. The USB-AI16-16A data acquisition board can be used in many current real-world applications such as embedded equipment monitoring, precision PC-based and portable environmental measurements, and mobile data acquisition. Additional features include 16 digital I/O lines and a programmable 16-bit counter. The counter can be configured in a variety of modes and has the ability to use external signals to trigger and control the scanning of its inputs.
The USB-AI16-16A is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom.
Factory options:
External power for high current capabilities
DIN rail mounting provision
OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
Current ranges (4-20mA, 10-50mA) S.E. or Diff
Extended Temperature Operation −40 to +85°C
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-AI16-16A OEM board can also be installed using standoffs inside other enclosures or systems.
Accessories
The USB-AI16-16A is available with optional cable assemblies and screw terminal boards for easy-to-use, out of the box connectivity.
Software
The USB-AI16-16A is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a highspeed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-AI16-16A is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
USB-AI12-16A
High Speed Multifunction 12-bit Analog Input
The USB-AI12-16A is an ideal solution for adding portable, easy-to-install high-speed analog and digital I/O capabilities to any computer with a USB port. The unit is a USB 2.0 high-speed device, offering the highest speed currently available with the USB bus. The USB-AI12-16A is a 12-bit resolution A/D board capable of speeds up to 500kHz for its 16 single-ended or 8 differential analog inputs. Each channel can be independently software configured to accept 8 different input ranges. Additionally, each channel includes its own analog ground pin on the I/O connector which is helpful in reducing noise. A unique, real-time internal calibration system allows the card to continually compensate for offset/gain errors giving a more accurate reading. The unit is plug-and-play allowing a quick connection whenever you need additional I/O on the convenience of a USB port.
This small, compact, multifunction I/O board provides the user with everything needed to start acquiring, measuring, analyzing and monitoring in a variety of applications. The USB-AI12-16A data acquisition board can be used in many current real-world applications such as embedded equipment monitoring, precision PC-based and portable environmental measurements, and mobile data acquisition. Additional features include 16 digital I/O lines and a programmable 16-bit counter. The counter can be configured in a variety of modes and has the ability to use external signals to trigger and control the scanning of its inputs.
The USB-AI12-16A is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom.
Factory options:
External power for high current capabilities
DIN rail mounting provision
OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
Current ranges (4-20mA, 10-50mA) S.E. or Diff
Extended Temperature Operation −40 to +85°C
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-AI12-16A OEM board can also be installed using standoffs inside other enclosures or systems.
Accessories
The USB-AI12-16A is available with optional cable assemblies and screw terminal boards for easy-to-use, out of the box connectivity.
Software
The USB-AI12-16A is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a highspeed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-AI12-16A is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
ADLPCIe-PCI
PCIe Bus to PCI Bus Bridge Adapter
The ADLPCIe-PCI bridge card enables the upgrade of existing PCI platforms to PCIe/104-based SBCs while maintaining legacy support for PCI peripherals. For example, current systems utilizing our PCI/104 ADL945PC or PC/104+ ADL855PC can incorporate our latest second and third generation Intel Core SBCs while maintaining legacy PCI support.
The ADLPCIe-PCI PCIe/104 bus adapter converts a single PCIe link lane (x1) into up to four 32-bit PCI loads operating at 33/66 MHz; allowing legacy PCI-104 and PC/104-Plus cards to be connected in a PCIe/104 system stack. The ADLPCIe-PCI also provides connection of an additional 2 USB ports routed from the host SBC over the PCI Express bus.
ADLCOM-ISOL
Isolated RS232 to RS232/RS485 Transceiver
The ADLCOM-ISOL in-line isolated transceiver, available in two models, for RS232 and RS485 provides peace of mind when faced with using a computer system in electrically noisy or unstable environments. With isolation of 500V AC / 60Hz for 1 minute and 1kV DC isolation for 1 second, you can rest assured that the ADLCOM-ISOL has the ability to catch many transients from the outside world that could do catastrophic damage to an embedded computer investment. The ADLCOM-ISOL also provides a means of simple and effective isolation of standard serial ports without the need to add another board to your embedded system.
The ADLCOM-ISOL is ideal for use in Automotive, Railway, Automation, and many other applications where protection from transient voltages is a must when connecting to the outside world. The ADLCOM-ISOL can also be ruggedized for harsh environments. Two convenient mounting holes are provided for ease of installation. At just 40mm x 26mm (1.6″ x 1.0″), the ADLCOMISOL will mount in tight spaces in most enclosures or environments.
ADLQM87PC
4th Gen Intel Core Processors W/ Intel 8-Series Chipset
The ADLQM87PC delivers the industry’s highest GIPS per inch and the most densely-packed comprehensive set of features. The ADLQM87PC’s 17 inch footprint features 4th generation Intel Core processors with Intel 8-series QM87 PCH chipset, onboard Mini PCIe/mSATA socket for on-board WiFi, GPS, bootable flash storage, a Trusted Platform Module (TPM v1.2), 2xUSB 3.0, up to 8GB 1.35V DDR3L, 2x SATA 6 Gb/s, 2x SATA 3 Gb/s, 2x GLAN, DisplayPort, HDMI/DVI, VGA, 8x USB 2.0, etc...all with a smaller footprint and height than a basic COM-Express module with greater temperature range and ruggedness.
The ADLQM87PC features a vastly improved HD4600 graphics engine with 2x the performance of the previous 2nd generation Intel Core graphics.
It is ideal for space constrained, rugged, or extended temperature applications where multi-core processor performance is critical. It brings unparalleled performance to countless applications such as radar and sonar processing, image signal processing, tactical command and control, surveillance and reconnaissance, transportation and railway.
ADLQM87PC support includes 3D CAD modeling support and full system design services which include custom chassis design and system integration services. Please contact your sales representative for more information.
ADLE3800PC
Intel Atom Dual/Quadcore 4th Generation SoC/Bay Trail PCIe/104 Form Factor SBC
The ADLE3800PC is based on Intel’s first System-on-Chip (SoC) E3800 Atom product family which is built using Intel’s 22nm 3D Tri-gate process. It offers vastly superior compute performance and energy efficiency including Intel’s E3800 7th generation graphics engine for stunning graphics performance. Improved power management capabilities result in standby power measured in milliwatts with days of standby time.
The ADLE3800PC is ideal for rugged, extended temperature intelligent systems with stringent size, weight, and power (SWAP) requirements. It has a wide thermal junction temperature (Tj) ranging from −40°C to +85°C.
Its graphics engine is capable of decoding 10 or more streams of 1080p video, has integrated hardware acceleration for video decode of H.264, MVC, VPG8, VC1/WMV9 and others standards. It also supports DirectX 11, Open GL 4.0, full HD video playback, dual display support and a maximum resolution of 2560×1600 @ 60Hz.
It’s particularly suited for extreme environments such as industrial control and automation, in-vehicle communication and infotainment systems for commercial transportation fleets. It’s superior graphics and low power also make it ideal for rugged mobile computing, portable medical devices, and mobile autonomous systems for civil, commercial and defense applications.
ADLQM87HD
3.5" SBC Based on 4th Generation Intel Core Quad/DC I5/I7 Processors
The ADLQM87HD features Intel’s 4th generation Intel Core processors with Intel’s latest HD Graphics 4600 engine with support for DirectX11.1, OpenGL 4.0, and OpenCL 1.2. The new Haswell Architecture built on Intel’s low-power 22nm tri-gate process incorporates a new AVX2 instruction set, more instructions per cycle, deeper idle states, more execution units, higher cache bandwidth, and smarter power management with the end result being a significant performance increase with much lower power than the previous Sandy Bridge architecture.
The ADLQM87HD is ideal for mobile and embedded applications where high processor performance with low battery or power usage is critical. It brings unparalleled performance to applications such as radar and sonar processing, image signal processing, tactical command and control, surveillance and reconnaissance, medical imaging and lab analysis, and industrial automation.
In addition to the wide range of applications in which the ADLQM87HD can excel, it also supports a broad set of features. The ADLQM87HD introduces TPM 1.2 and USB 3.0 functionality into ADLES’ 3.5″ SBC product line for the first time . Onboard connectors support both DVI/VGA as well as HDMI/DP. The ADLQM87HD also has 3x RS232 COM ports, 4x SATA 6Gb/s with RAID 0, 1, 5 and 10 support. It also includes 8x USB2.0, 3x USB 3.0, two bootable Gigabit Ethernet LAN ports, HDA 7.1, and a 2×40-pin PCIE expansion connector with four PCIe x1 lanes or one PCIe x4 lane for additional breakout or mezzanine board functionality.
ADL Embedded Solutions offers highly effective active and passive thermal solutions designed for this product. Contact us for more information.
