MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
104-PWR-512A
Embedded PC104 Power Supplies
The design incorporates a 16-bit pass through PC/104 connector, molex power input connector and voltage status LED’s. Since heat is always a factor to consider in any system design project, the DC/DC converter can be populated on either side of the board to facilitate heat sinking to one end of an enclosure, with the CPU heat sinking to the other end of the enclosure.
This triple output version can be ordered with or without a heatsink. At up to 85% efficiency, a dynamic input range and full protection on inputs and outputs, this power supply is very versatile and appropriate for many PC/104 based applications.
The Input Power Connector is a Four-pin standard Molex type connector at the edge of the board. It’s the same connector as used on a CD-ROM so it’s easy to set up and test a system with a local +12V computer power supply.
Fully software transparent, the 104-PWR-512 occupies no resources; zero I/O memory locations, IRQs, DMA channels or bandwidth of any types are consumed. Compatible with all operating systems and software.
104-PWR-500A
Wide Range DC/DC PC/104 Power Module
The design incorporates a 16-bit pass through PC/104 connector, molex type power input connector and voltage status LED’s. Since heat is always a factor to consider in any system design project, this module can be populated on either side of the board to facilitate heat sinking to one end of an enclosure, with the CPU heat sinking to the other end of the enclosure.
This single output version can be ordered with or without a heatsink. At up to 84% efficiency, a dynamic input range and full protection on inputs and outputs, this power supply is very versatile and appropriate for many PC/104 based applications.
The Input Power Connector is a Four-pin standard Molex type connector at the edge of the board. It’s the same connector as used on a CD-ROM so it’s easy to set up and test a system with a local +12V Computer type power supply.
ADLPS35ISO-150
150W 2”X4” ATX Power Supply
The ADLPS35ISO-150 board is designed to meet the needs of industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a small form factor power supply designed for −40°C to +85°C operation. Its small 2"x4″ size (50mm x 102mm) allows it to fit many space limited applications.
The ADLPS35ISO-150 provides up to 500V of galvanic isolation from dirty power and unwanted transients and is tailored to work in conjunction with ADL Embedded Solutions’ advanced high performance SBC’s with more than enough headroom for inrush startup currents, and high-power quiescent operation.
ADLPS35-150-5
150W 2”X4” ATX Power Supply
The ADLPS35-150 power supply board is designed to meet the needs of industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a small form factor power supply designed for −40°C to +85°C operation. Its small 2"x4″ size (50mm x 102mm) allows it to fit many space limited applications. As well, the ADLPS35-150 is tailored to sit sideby-side with our 3.5-inch product line of motherboards and can also be adapted to a PC/104 stack via an optional mounting plate.
The power supply features ATX compliant signaling to allow ACPI/APM power management from within compliant operating systems. At 150 Watts total power and just 50mm x 102mm in size, this small and rugged power supply will fit into most embedded applications.
The ADLPS35-150 is available in two variants, one allowing an input voltage range of 7-36V but providing only the 5V, 5VS, and 3.3V outputs, the other with a narrower input voltage range of 14-36V but providing 5V, 5VS, 3.3V and 12V outputs.
The board is protected against many types of input power anomalies, such as over-currents, voltage deviations and voltage surge. Short bursts of over-current are simply filtered out. Should overvoltage or under voltage situation persist too long, the power supply shuts off. Noise interference is dampened by up to 35dB. The output is protected against reverse voltage and short-circuit.
ADLPS104ISO-150
150W PSU with Galvanic Isolation
The ADLPS104ISO-150 power supply board is designed to meet the needs of high-powered Intel Core industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a stackable PCI/104-Express form factor designed for operation at 150W. Its small (90mm x 96mm) footprint allows it to fit in many space limited applications. As well, the ADLPS104ISO-150 provides up to 500V of galvanic isolation from dirty power and unwanted transients. The ADLPS104ISO-150 features ATX compliant signaling to allow ACPI/APM power management from within compliant operating systems.
The ADLPS104ISO-150 boasts an MTBF >600,000 hrs and is tailored for long-life embedded applications with more than enough headroom for inrush startup currents, and quiescent operation with our wide range of high‑performance SBCs and multiple peripheral cards.
A small, 1"x2″ MIL-STD 704-1275/461 MILCOTS input filter option enables use on military avionics, ground vehicles and EMI-sensitive applications.
The board is protected against many types of input power anomalies, such as over-currents, voltage deviations and voltage surge. Short bursts of over-current are simply filtered out. Should overvoltage or under voltage situation persist too long, the power supply shuts off. Noise interference is dampened by up to 35dB. The output is protected against reverse voltage and short-circuit.
ADLPS104-150
150W ATX Power Supply
The ADLPS104-150 power supply board is designed to meet the needs of high-powered Intel® Core™ industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a stackable PCI/104-Express form factor designed for — 40°C to +85°C operation at 150W. Its small (90mm x 96mm) footprint allows it to fit in many space limited applications. As well, the ADLPS104-150 is tailored to work in conjunction with our ADLQM67PC Sandy Bridge SBC with more than enough headroom for inrush startup currents, and quiescent operation with multiple peripheral cards. Of course, it is also an economical choice for the ADLGS45PC and other lower power platforms.
The ADLPS104-150 features ATX compliant signaling to allow ACPI/APM power management from within compliant operating systems.
The ADLPS104-150 is available in two variants, one allowing an input voltage range of 7-30V but providing only the 5V, 5VS, and 3.3V outputs, the other with a narrower input voltage range of 14-36V but providing 5V, 5VS, 3.3V and 12V outputs.
The board is protected against many types of input power anomalies, such as over-currents, voltage deviations and voltage surge. Short bursts of over-current are simply filtered out. Should overvoltage or under voltage situation persist too long, the power supply shuts off. Noise interference is dampened by up to 35dB. The output is protected against reverse voltage and short-circuit. Additionally, the power supply design does not include the use of electrolytic capacitors, thus dramatically increasing the lifespan of the power supply.
ADLPS104CF
Power Supply with CF Socket PC/104+
The ADLPS104CF power supply is designed specifically with the ADL855PC product in mind. You can also use the power supply for other CPU’s as well.
The ADLPS104CF has a direct connection to a modified ADL Embedded Solutions CPU board on the ID port to allow for direct connection to the CF without cables.
The ADLPS104CF can supply 15A @ 5VDC (output) at room temperature without needing cooling. If additional cooling is a necessary it will be easy to place a heat sink on the board. Standard temperature range (ambient) of up to -40°C to +85°C.
Please contact us for more options.
USB-FLEXCOM4
USB to 4-Port Serial RS-232/422/485
This flexible serial communications adapter was designed for effective multipoint transmission in any one of three modes on each channel. These modes are RS232, RS422 and RS485 (EIA485) protocol.
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged USB to quad-serial port board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-FLEXCOM4 OEM board can also be installed using standoffs inside other enclosures or systems.
Accessories
The USB-FLEXCOM4 is available with optional cable assemblies and screw terminal adapter board ADAP9.
Software
The USB-FLEXCOM4 is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a high-speed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-FLEXCOM4 is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes Windows Xpe.
Factory options
OEM Board only version with no enclosure
HDR -OEM with 10-pin headers per port
DIN DIN rail mounting bracket
RoHS Available in a RoHS compliant version
USB-IIRO-16
32 Channel Isolated Input Relay Output
The USB-IIRO-16 is an ideal solution for adding portable, easy-to-install isolated input and relay output digital I/O capabilities to any computer with a USB port. The USB-IIRO-16 is a USB 2.0 high-speed device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port.
Featuring 16 Form C (SPDT) electromechanical relays and 16 optically isolated digital inputs, the unit is the smallest of its kind for digital monitoring and control using USB. The isolated, non-polarized inputs may be driven by either DC sources of 3-31 V (or higher by special order) or AC sources at frequencies of 40 Hz to 10KHZ. Optically isolating the digital inputs from each other, and from the computer, assures smooth, error-free data transmission in noisy, real-world environments. The input channels are available via a 34-pin IDC type vertical header.
The relay outputs are de-energized at power-up to prevent an unintended control output signal. Data to the relays is latched. The relay contacts are available via a 50-pin IDC type vertical header. The USB-IIRO-16 contains an internal, removable screw termination board (USB-STB-84) with onboard removable screw terminals to simplify wiring connections. The USB-STB-84 mounts directly into the vertical IDC connectors of the USB-IIRO-16 PCB. The USB-IIRO-16, like the PC/104 and PCI versions, is excellent in applications where on-board relays are required and inputs must be isolated such as in test equipment, instrumentation, and process control.
The USB-IIRO-16 is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom.
Factory options:
Eight input/output version
External power for high current capabilities
Input only and relay only versions
External power for high current capabilities
DIN rail mounting provision
Economy «E» version also available without the screw terminal board
OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged digital board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-DIO-32 OEM board can also be installed using standoffs inside other enclosures or systems.
Accessories
The USB-IIRO-16 is available with optional cable assemblies and screw terminal board.
Software
The USB-IIRO-16 is plug-and-play which allows quick connect or disconnect whenever you need additional I/O on your USB port. The module utilizes a high-speed custom function driver optimized for a maximum data throughput that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-IIRO-16 is supported for use in most USB supported operating systems and includes a free Linux and Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
USB-IDIO-16
16-ch. Isolated Inputs, 16 Solid State Relay Outputs
The USB-IDIO-16 is an ideal solution for adding portable, easy-to-install isolated input and solid state output capabilities to any computer with a USB port. The USB-IDIO-16 is a USB 2.0 high-speed device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit features hotplug functionality allowing for quick connect/disconnect whenever you need additional I/O on your USB port.
Featuring 16 high side power MOSFET switch outputs and 16 optically isolated digital inputs, the unit is the smallest of its kind for digital monitoring and control using USB. The isolated, non-polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10kHz. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Optically isolating the digital inputs from each other, and from the computer, assures smooth, error-free data transmission in noisy, real-world environments. The input channels are accessed via a 34-pin IDC type vertical header. The fully protected isolated outputs are de-energized at power-up to prevent an unintended control output signal. Data to the solid state outputs are latched and are available via a 50-pin IDC type vertical header. The unit contains an internal, removable screw termination board with onboard removable screw terminals to simplify wiring connections.
These boards are especially useful in applications where high common-mode external voltages are present. Isolation is required to guard electronics from transient voltage spikes and offers greater common-mode noise rejection in electronically noisy surroundings containing industrial machinery and inductive loads. These applications include factory automation, energy management, industrial ON/OFF control, security systems, manufacturing test, and process monitoring. In addition to protecting industrial applications from accidental contact with high external voltages, the isolation provided eliminates troublesome ground loops.
The USB-IDIO-16 was designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is PC/104 sized (3.550 by 3.775 inches) and ships with or without a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision is available for installation in industrial environments.
Factory options:
Input only and solid state output only versions
Eight input/output version
External power for high current capabilities
Extended temperature and DIN rail mounting provisions
OEM version (board only) features PC/104 module size and mounting compatibility
RoHS available. Please contact us for ordering information
OEM USB/104 form factor
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and pre-drilled mounting holes match the PC/104 form factor (without the bus connections). This ensures easy installation using standard standoffs inside most enclosures or systems. The board can be added to any PC/104, PCI-104, or PCI/104-Express stack by connecting it to a USB 2.0 port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-IDIO-16 OEM board can also be installed using standoffs inside other enclosures or systems. For embedded OEM type applications, an additional miniature USB input header is provided in parallel with the type B connector.
High Retention USB Connector
The ever-growing presence of USB in the industrial/military marketplace has driven the need for USB connections to be reliable, dependable, and unfailing. Gone are the days of loose USB connections. A type B USB connector is used on all USB/104 products which features a high retention design that complies with the class 1, Div II minimum withdrawal requirement of over 3 pounds of force (15 Newtons). This connector has an orange color-coded insulator to quickly differentiate it from standard USB connectors. Using these USB connectors increases reliability in your system and ensures a tight connection. For embedded OEM type applications, an additional miniature USB input header is provided in parallel with the type B connector.
Accessories
Available accessories include a wide variety of cables and screw terminal boards for quick and easy connectivity.
Software
The module utilizes a high-speed custom function driver that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The USB-IDIO-16 is supported for use in most USB supported operating systems and includes a free Linux (including Mac OS X) and Windows 95/98/Me/NT/2000/XP/2003- compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third-party support includes a Windows standard DLL interface usable from most popular application programs, and includes example LabVIEW VIs. Embedded OS support includes Windows XPe.
