MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
ADG039
SUMIT to PCIe/104 Adapter
Connect Tech’s SUMIT to PCIe/104 Adapter allows for easy integration of PCIe/104 or PCI/104-Express cards into an existing SUMIT-104 system.
The SUMIT to PCIe/104 Adapter is fully compatible with any Legacy Type-1 or Type-2 SUMIT‑104 system, and allows x1 and x4 lane PCIe/104 or PCI/104-Express peripherals to be used with SUMIT cards in a SUMIT‑104 stack.
Additional signals available on the PCIe/104 bus include SMbus and 2 x USB. Additional accessible signals include 2 x USB ports via on-board Mini-USB connector (optional).
PCIe/104 to Single/Dual Mini-PCIe Adapter
PCI/104-Express to Single/Dual Mini-PCIe (PCI Express Mini Card) Adapter
Connect Tech’s PCIe/104 to Single/Dual Mini-PCIe Card Adapters easily enable integration of a Mini-PCIe (PCI Express Mini) card into a PCIe/104 or PC/104‑Express system.
Expand the Capabilities of an Existing PCIe/104 or PC/104-Express System
PCIe/104 to Single/Dual Mini-PCIe Card Adapters are fully compatible with any Mini-PCIe peripheral, expanding the capabilities of an existing PCIe/104 or PC/104-Express system. Add features such as WiFi, GPS, Bluetooth, storage and broadband communications.
ADG021
PCIe/104 to PCI Express Adapter Bottom Stacking Model
Connect Tech’s PCIe/104 to PCI Express Bottom Stacking adapter allows users to install any x1, x4, x8 or x16 lane PCI Express card into a PCIe/104 or PCI/104-Express stack down configuration.
This convenient adapter board enables the testing and development for standard PCI Express cards in the PCIe/104 or PCI/104-Express environment.
Standard Usage
This adapter supports any x1, x4, x8 or x16 lane PCI Express add-in card. Simply mount the PCI Express stack to the adapter and install the PCI Express card into the slot.
Once everything is connected, you may begin using the add-in card just as you would any other PCI/104-Express add-in card. No additional configuration is required.
ADG018
PCI Express Dump Switch Card
The PCIe Dump Switch card debugs system hangs with ease to save time and frustration. It is essential hardware for every developer.
When systems freeze during development or testing, a hardware reset results in loss of crucial information that could be used to analyze the root problem. Instead of spending hours of valuable time sourcing the cause of the system hang, the PCIe Dump Switch identifies bugs at the push of a button.
The button on the PCIe Dump Switch triggers a Non-Maskable Interrupt (NMI), enabling a crash dump or drops execution into your operating system’s debugger. This dump action preserves information that would normally be lost during a reset.
ADG017
PCIe/104 to PCI Express Adapter Top Stacking Model
Connect Tech’s PCIe/104 to PCI Express Top Stacking adapter allows users to install any x1, x4, x8 or x16 lane PCI Express card into a PCIe/104 or PCI/104-Express stack up configuration.
This convenient adapter board enables the testing and development for standard PCI Express cards in the PCIe/104 or PCI/104-Express environment.
Standard Usage
This adapter supports any x1, x4, x8 or x16 lane PCI Express add-in card. Simply mount the add-in card to the adapter and install the adapter on the top of a PCIe/104 or PCI/104-Express stack.
Once everything is connected, you may begin using the add-in card just as you would any other PCI/104-Express add-in card. No additional configuration is required.
ADG016
PCI Express to PCIe/104 Adapter
This convenient adapter board allows users to install a PCIe/104 card into a standard PCI Express system slot.
Standard Usage
This adapter supports any x1 lane PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCIe/104 cards will require the connection of an IDE power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card.
Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required.
ADG013
PCI-104 to PMC Adapter
This convenient adapter board allows PMC cards such as an IEEE 1386.1 card to be easily incorporated into an existing PCI-104 stack.
The design includes signal multiplexing circuits, allowing multiple PMC cards to operate in a PCI-104 stack using multiple adapters simultaneously.
Constructed with GND and Power Planes, this adapter has exemplary signal integrity and low DC resistance.
Standard Usage
Simply mount the PMC card to the adapter, set the PCI-104 slot selector switch and place into the host system’s PCI-104 stack.
Xtreme/Multi-I/O
Сommunication board
Connect Tech’s Xtreme/Multi-I/O features dual SJA1000 CANbus controllers, isolated serial and CAN ports, and two MultiTech Universal compatible sockets on a single PC/104 board design. This high density communication board offers an all-in-one communication solution, optimizing Size, Weight, and Performance requirements. This innovative product takes full advantage of the latest technologies in jumperless configuration, high voltage isolation and advanced communication functionality.
On-board FPGA and PIC32 microcontroller facilitate jumperless configuration of the board, with the FPGA providing a full-featured J1708 controller. Xtreme/Multi-I/O includes two galvanic isolated CANbus controllers with 2500V isolation protection and advanced networking and configuration capabilities.
The 4x RS-232 ports and 1x RS-485/J1708 port features 2500V isolation protection and individual +5VDC isolated power supplies, providing less noise and increased system protection. With USB connectivity and jumperless setup, extended operating temperature, and versatile options, Connect Tech’s Xtreme/Multi-I/O is ideal for CANbus, serial, wired and wireless communication.
ComSync/PCI-104 Gen. 3
Multi-protocol serial adapter
Based on the PCI bus and a compact form factor, this two‑channel, multi-protocol serial adapter offers high performance, reliable, synchronous or asynchronous serial communications for your industrial or embedded needs.
Providing the maximum in flexibility, this PCI-104 card allows you to choose from multiple electrical interfaces, protocols and encoding schemes to ensure your hardware solution is ideally suited to your specific application.
Xtreme I/O ADC-DAC
PCI-104 Analog and Digital Data Acquisition Board
Connect Tech’s Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications.
