MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
M-Max 700 PR/TTI
Rugged Industrial Computer with UPS Subsystem
M-Max® 700 PR/TTI is a high performance rugged computer for vehicle data acquisition. The system is designed to operate in extremely harsh environments and is suitable for most applications that support real-time video encoding. The Max® 700 PR/TTI is equipped with video capture CVBS, CAN interfaces, and has an expanded set of RS-232/422/485 ports, plus digital I/O. The embedded video encoder with JPEG2000 compression/decompression supports three video input channels and video decoders for simultaneous sampling.
The unit’s internal super-capacitor based UPS provides 2 minutes of backup power.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
M-Max 400 ST/USO
Rugged Industrial Error-free Computer with UPS Subsystem
The M-Max® 400 ST/USO is an error‑free rugged computer for on‑board and off-the-shelf applications. It provides error-free signaling information processing, based on 2-out-of-2 architecture.
The M-Max® 400 ST/USO contains two identical subsystems connected to each other via internal interface. Each subsystem has its own processing core and a UPS employing an intelligent ultracapacitor-based charging device.
The M-Max® 400 ST/USO’s two independent CPUs form a vital processing core and perform calculations (such as interlocking logic) in different ways. Once per cycle they are synchronised with each other to exchange data and perform consistency cross-checks.
The UPS ultracapacitors provide the system with 70 seconds of backup power. The system is designed for use on stationary objects within the railway infrastructure.
MicroMax, as a manufacturer of industrial computers, takes a customized approach to each client. Our engineering group can design M-Max® systems to fit customer-specific technical requirements.
Gateway-CAN-MVB2
Rugged Intelligent Locomotive Gateway
The Gateway-CAN-MVB2 rugged computer is used to decode signals between railroad continuous Automatic Train Control (ATC) systems with CAN interfaces or similar devices and onboard systems utilizing Multifunction Vehicle Bus (MVB).
This fanless intelligent Gateway is designed to be used in onboard safety systems installed in locomotives, high speed trains such as Velaro, Desiro and others. The system can be easily adapted to the technical requirements of different railroad vehicles.
This IP65 rated system is housed in a rugged aluminum enclosure with dual shock and vibration protection. It is based on proven PC/104 technology, and its compact design and low power makes it the ideal solution for on-board smart interface conversion.
AR Platform
High performance and upgrade opportunities
The AR Platform provides high performance and vast upgrade opportunities.
The AR Platform can be equipped with either 2-core i3-6102E 1.9 GHz or i3-6100E 2.7 GHz CPU, 8 or 16 GB of RAM (soldered) and SSD from 8 or 32 GB via embedded SATA2 and 2x SATA3 interfaces. The AR Platform uses Intel HD 530 0.35–0.95 GHz for video processing and DP + HDMI for video output.
Other interfaces include 2x Gigabit Ethernet, 4x USB 2.0, 1x USB 3.0 2x RS-232 and 8 DIO lines. Power consumption is 45 or 55 W depending on the chosen configuration. Operating temperature is −20°C to +60°C (-40°F to +140°F), expandable to −40°C to +65°C (-40°F to +149°F).
The AR Platform is compatible with the following M-Max® Systems: VT, ATR, HR 3U.
DT Platform
High performance and upgrade opportunities
The DT Platform provides high performance and vast upgrade opportunities.
The DT Platform carries 2-core i7-6600U 2.6-3.4 GHz CPU, 4 to 20 GB of RAM (soldered) and SSD from 8 GB via mSATA3 and 2x SATA3 interfaces. The platform uses Intel HD 520 0.3–1.0 GHz for video processing and VGA + HDMI for video output. Audio interfaces include 2x inputs, 2x outputs, and 1x mic input.
Other interfaces include 2x Gigabit Ethernet, 2x USB 2.0, 4x USB 3.0, 4x RS-232/485 (lim.) and 16 DIO lines. Power consumption is 21 W. Operating temperature is -40°C to +65°C (-40°F to +149°F).
The DT Platform is compatible with the following M-Max® Systems: ATR, HR 1U, HR 3U.
EP4 Platform
High performance and upgrade opportunities
The EP4 Platform provides high performance and vast upgrade opportunities.
The EP4 platform offers a wide range of CPU options from Intel Celeron to Intel Xeon, 8 to 48 GB of RAM and SSD from 8 GB via 2x mSATA3 and SATA3 interfaces. The platform uses Intel UHD 610, UHD 630, HD Graphics 630, or UHD Graphics P630 for video processing and either 2x HDMI, DP or DVI for video output. Audio interfaces include 2x headphones outputs and 2x mic inputs.
Other interfaces include 2x Gigabit Ethernet, 4x USB 3.0 and 2x(lim.) RS-232/485. Power consumption is either 55 or 65 W depending on the chosen configuration. Operating temperature is −20°C to +55°C (-4°F to +131°F), expandable to −40°C to +60°C (-40°F to +140°F).
The EP4 Platform is compatible with the following M-Max® Systems: ATR, HR 3U, VI.
LP Platform
Optimal performance and low power consumption
The LP Platform is a good choice when low power consumption is critical. For this platform it adds up to just 3 W.
The LP Platform uses Apalis i.MX6 800 MHz CPU which performance is comparable with Intel Atom CPU from our next PR5 and PR7 Platforms. It has 2 GB of RAM and SSD soldered on board. Storage space is expandable via mSATA interface.
The standard version offers enough I/O interfaces for a variety of applications. The platform is equipped with both VGA and HDMI outputs and uses Vivante GC2000 for video processing. Other interfaces include 2 audio inputs, 2 audio outputs, 1 mic input, 1x Gigabit Ethernet, 4x USB 2.0, 2x RS-232 (lim.), 2x RS-232/485 and 8x DIO lines.
Operating temperature of an LP Platform-based system is −40°C to +70°C (-40°F to +158°F). The standard enclosure for the LP Platform is Pandora 3″.
The LP Platform is compatible with the following M-Max® Systems: PD 2, HR 1U.
CU Platform
The highest performance and upgrade opportunities
The CU platform offers the highest performance available and great expandability.
The CU platform can be equipped with a variety of Intel Xeon and Intel Core i7 CPU options and up to 64 GB of RAM. Storage options include SSDs from 8 GB. The platform uses NVIDIA Quadro P1000 or NVIDIA GeForce GTX 1050Ti for video processing and DisplayPort/HDMI/DVI, VGA, LVDS interfaces for video output.
Other interfaces include 2x Gigabit Ethernet, 4x USB 3.0, 2x RS-232/RS-485 and HD Audio. Power consumption is 100 W. Operating temperature range is −40°C to +50°C (-40°F to +122°F).
The M-Max CU platform is compatible with M-Max® ATR System, HR 3U.
GX Platform
Optimal performance and good expandability
The GX platform will fit applications which require both optimal performance and low power consumption.
The GX platform is equipped with 4-core Celeron N3160 1.6–2.24 GHz CPU and can carry 2 to 8 GB of RAM. Storage options include SSDs from 64 GB via mSATA.
The GX platform uses HD Graphics 320–640 MHz for video processing and VGA interface for video output. Audio interfaces include 1 output and 1 mic input. Other interfaces include 2x Gigabit Ethernet, 4x USB 2.0, 4x RS-232, 2x RS-232/485 and 16x DIO lines.
Power consumption of the platform is 36 W. Operating temperature for GX platform-based system is -20°C to +50°C (-4°F to +122°F).
The GX platform is compatible with the following M-Max® Systems: HR 1U, HR 3U.
PR7 Platform
Optimal performance and good expandability
The PR7 Platform will fit applications which require both optimal performance and low power consumption while offering better expandability in comparison with the LP Platform.
The choice of CPUs for the PR7 Platform includes 2-core Atom E3826 1.46 GHz and Atom E3845 1.91 GHz. The PR7 Platform can be equipped with either 2 or 4 GB of RAM (soldered on board). Storage options include SSDs from 8 GB via mSATA2 and SATA2 interfaces.
The PR7 Platform uses HD 7th Generation 533-667 MHz or 542-792 MHz for video processing and either VGA or HDMI + DP interfaces for video output. Audio interfaces include 2x inputs, 2x outputs, and 1x mic input. Other interfaces include 2x Gigabit Ethernet, 2x USB 2.0, 1x USB 3.0, 4x(lim.) RS-232/485 and 16x DIO lines.
Power consumption of the PR7 Platform is 11 W or 14 W depending on the chosen configuration. Operating temperature for a PR7 Platform-based system is −40°C to +70°C (-40°F to +158°F). The standard enclosure for the PR7 Platform is Versatainer.
The PR7 Platform is compatible with the following M-Max® Systems: PD 7, VT, ATR, HR 1U, HR 3U, VI.
