MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Jupiter-MM
50 Watt PC/104 DC/DC Power Supply for Vehicle Applications
This rugged, extended-temperature DC/DC power supply is designed specifically for air and ground vehicle applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator lamps, and both 8-bit and 16-bit PC/104 bus headers. Input voltage range is 7 to 30VDC, making it suitable for use with both 12V and 24V systems.
Output power is provided directly onto the PC/104 bus connectors, as well as on an auxiliary connector for external tapping. Both dual output (+5, +12) and quad output (+5, +12, -5, -12) versions are available. Up to 10 amps can be provided on the +5 output, or the 50 watts of total power can be distributed across the 4 outputs.
The low-profile SMT design guarantees that you can add other PC/104 modules on top of this board without any worries of mechanical interference. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.
Neptune
EPIC format CPU with integrated autocalibrating analog I/O, digital I/O and DC/DC power supply
Neptune is an ultra high integration EPIC form factor single board computer combining state-of-the-art CPU and I/O technology with Diamond System’s renowned high accuracy data acquisition circuitry on a single board. Neptune is available with a selection of CPU modules, offering you the perfect combination of price, performance and power. Neptune also offers up to 2GB of DDR/DDR2 DRAM via SODIMM, provides a PC/104-Plus interface for expansion, supporting both PCI and ISA.
Neptune incorporates advanced features such as a front side bus (FSB) ranging from 400MHz to 667MHz depending on the CPU module, four USB ports and S-ATA hard drive interface, depending on the CPU module. The dual graphics engines support both 2D and 3D graphics on dual independent CRT and LVDS displays. Neptune provides both 10/100BaseT and Gigabit Ethernet. Hard drive support is through CompactFlash, rugged IDE FlashDisk and USB bus interfaces. Six RS-232 serial ports (four with RS-422/485), AC ’97 audio, and legacy keyboard, mouse, floppy, parallel and IDE hard drive interfaces are also provided.
Neptune’s optional integrated data acquisition has 32 single ended or 16 differential analog inputs with 16-bit resolution and 250KHz sample rate, four 32-bit analog inputs with 100KHz waveform output capability, autocalibration of the analog circuits, eight optically isolated digital inputs, eight optically isolated digital outputs, 24 programmable digital I/O lines, and two counter/timers. It supports both interrupt and DMA A/D transfers and it uses an enhanced 1,024-sample FIFO with programmable threshold for maximum flexibility and data reliability.
Software support is provided for Windows XP, Linux and Windows CE as well as Diamond System’s Universal Driver programming software for the data acquisition circuitry. For harsh environments, Neptune is engineered with all on-board I/O brought to pin headers with cables available for every connector interface. I/O that utilizes PC-style connectors is placed such that a small panel I/O board can be used to convert to PC-style connectors for use in an enclosure. Standard versions of Neptune operate from 0 to +60°C. Select models have an extended operating temperature range of -40° to +85°C. Conformal coating is available.
Rhodeus
Low Power AMD Geode LX800 PC/104 CPU Module with CRT/LCD, LAN and CompactFlash
Rhodeus is a fan-less PC/104 SBC which features the AMD Geode LX800 low power consumption processor running at 500MHz. It uses high speed DDR SDRAM providing maximum capacity at 1GB. Rhodeus offers fully integrated PC functionality with low power consumption which allows Rhodeus to operate in harsh environments where the airflow for heat dissipation is restricted and heat sinks or fans are unacceptable. Its ruggedability gives it the power to perform round-the-clock in unattended environments.
Other advantages of Rhodeus includes high speed 10/100 Ethernet LAN and ample I/O interfaces, 2 serial ports, 2 USB 2.0 ports, parallel port for peripheral connection, 1 ATA-33 channel, Compact Flash Type-II socket, PC/104 expansion bus, LCD & CRT interface, floppy, and watchdog timer. Rhodeus has all the necessary features and expansion capability in 96 X 90 mm form factor, which makes it ideal for applications where space is limited but multiple I/O configurations are needed. Rhodeus supports Windows 2000, Windows XP, Windows CE 5.0, and Linux.
Helios
300MHz to 800MHz PC/104 Single Board Computer
Helios is a low power, mid range performance PC/104 form factor single board computer combining a highly integrated CPU with Diamond Systems’ renowned high‑accuracy data acquisition circuitry on a single board, reducing size and cost while increasing ruggedness. Helios utilizes a Vortex integrated single chip CPU operating at 300MHz or 800MHz and 128MB or 256MB of DRAM soldered on-board.
Helios incorporates advanced features such as four USB 2.0 ports, an IDE hard drive interface, mounting capability for a solid state flashdisk up to 4GB, and CRT/LVDS LCD graphics. Helios also provides a 10/100Base-T Ethernet interface, two RS-232 serial ports, two RS-232/422/485 serial ports and legacy keyboard and mouse interfaces.
Helios is extremely rugged, featuring on-board soldered DRAM and -40°C to +85°C fan-less operation. Optional hardwired jumpers and latching connectors are available for increased resistance to shock and vibration. Conformal coating is available as an extra cost option.
Express-ID7
COM Express Rev. 3.1 Type 7 Basic Size Module with Intel Xeon D-1700 Processor
ADLINK’s Express-ID7 COM Express Type 7 Basic Size module is based on the Intel Xeon D-1700 processor and features integrated high-speed Ethernet for up to 4×10G combined with 16 PCIe Gen4 lanes for instantaneous responsiveness and performance.
Equipped with Intel TCC, Deep Learning Boost (VNNI), AVX-512 technologies for optimal, accelerated AI performance, and support for Time Sensitive Networking (TSN), it provides precise control of hard-real-time workloads across all networked devices.
Built for rugged and edge AI applications, this ADLINK COM with Intel Ice Lake-D empowers system integrators to realize all of their IoT innovations, from edge networking, unmanned aerial vehicles, autonomous driving, robotic surgery, to rugged HPC servers, 5G base stations, automatic drilling, ship management, and more.
Express-VR7
COM Express Rev. 3.1 Basic Size Type 7 Module with AMD Ryzen Embedded V3000
ADLINK’s Express-VR7 COM Express Type 7 Basic size module is based on AMD Embedded Ryzen V3000 series processor. Offering up to 8 cores and 16 threads at 15W/45W TDP, the module exhibits the best performance per watt in its class, along with 14x PCIe Gen4 lanes with enterprise level reliability and extreme rugged temperature option (-40°C to 85°C).
The module provides dual-channel DDR5 memory at 4800 MT/s with ECC and includes 2×10G Ethernet plus 1×2.5GB Ethernet ideal for your various next-gen networking applications at the edge.
cPCI-6208/6216
8/16-CH 16-Bit Analog Output Modules
ADLINK 6208/6216-GL Series are 8-ch or 16-ch, 16-bit analog output cards. They each offer ±10 V output ranges and 25 V/µs slew rates.
Each channel is equipped with a dedicated digital to analog converter, and the output value of each channel can be updated individually.
These devices provide high resolution, high density analog output functionalities and are suitable for automation test equipment, signal generation, industrial process control, servo control, and several other industrial control applications.
cPCI-3544
4-Port RS-422/485 Isolated Serial Communications Card
The cPCI-3544 is an enhanced four ports serial communication module for industry communication interface RS-422/485 by Compact-PCI platform. It includes a PGA (Programmable Gate Array) to support the serial communication controller and a 37-pin connector to connect external I/O port from the front panel or using the rear I/O.
The expansion cable has four standard DB25 or DB9 connectors and one DB37 connector to connect with cPCI-3544 interface card.
The cPCI-R3544 transition board can support rear I/O connection by using one DB37 connector.
cPCI-3548
3U CompactPCI 8-port serial communication module
The cPCI-3548 is a 3U CompactPCI 8-port RS-232/422/485 communication peripheral module with external I/O connected from the front panel using a 62-pin connector or using the module’s rear IO. It is compliant with the PICMG 2.0 R3.0 CompactPCI specification.
PCI-7432/7433/7434
64-CH Isolated Digital I/O PCI Cards
ADLINK’s cPCI/PCI-743X series cards are 64-CH high-density digital input and/or output cards that provide a robust 2,500 V isolation protection and are suitable for most industrial applications.
The wide input range of the cPCI/PCI-7432 and cPCI/PCI-7433 makes it easy to sense the status of external devices. There are several options for PCI-743X series, such as normal version with input range from 0 to 24 V, as well as HIR version with high input range from 0 to 50 V. The PCI- 7433ALC is specifically designed for AC power test system.
The cPCI/PCI-7432 and cPCI/PCI-7434 feature a wide output range from 5 to 35 V, suitable for relay driving and industrial automation applications. The cPCI/PCI-7432 and cPCI/PCI-7433 also provide two interrupt sources on digital input channels, which are easily configurable.
