MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
cPCI-3548
3U CompactPCI 8-port serial communication module
The cPCI-3548 is a 3U CompactPCI 8-port RS-232/422/485 communication peripheral module with external I/O connected from the front panel using a 62-pin connector or using the module’s rear IO. It is compliant with the PICMG 2.0 R3.0 CompactPCI specification.
PCI-7432/7433/7434
64-CH Isolated Digital I/O PCI Cards
ADLINK’s cPCI/PCI-743X series cards are 64-CH high-density digital input and/or output cards that provide a robust 2,500 V isolation protection and are suitable for most industrial applications.
The wide input range of the cPCI/PCI-7432 and cPCI/PCI-7433 makes it easy to sense the status of external devices. There are several options for PCI-743X series, such as normal version with input range from 0 to 24 V, as well as HIR version with high input range from 0 to 50 V. The PCI- 7433ALC is specifically designed for AC power test system.
The cPCI/PCI-7432 and cPCI/PCI-7434 feature a wide output range from 5 to 35 V, suitable for relay driving and industrial automation applications. The cPCI/PCI-7432 and cPCI/PCI-7433 also provide two interrupt sources on digital input channels, which are easily configurable.
cPCI-7432/7433/7434
64-CH Isolated Digital I/O Modules
ADLINK’s cPCI/PCI-743X series cards are 64-CH high-density digital input and/or output cards that provide a robust 2,500 V isolation protection and are suitable for most industrial applications.
The wide input range of the cPCI/PCI-7432 and cPCI/PCI-7433 makes it easy to sense the status of external devices. There are several options for PCI-743X series, such as normal version with input range from 0 to 24 V, as well as HIR version with high input range from 0 to 50 V. The PCI- 7433ALC is specifically designed for AC power test system.
The cPCI/PCI-7432 and cPCI/PCI-7434 feature a wide output range from 5 to 35 V, suitable for relay driving and industrial automation applications. The cPCI/PCI-7432 and cPCI/PCI-7433 also provide two interrupt sources on digital input channels, which are easily configurable.
cPCI-A3525
3U CompactPCI Serial 9th Gen Intel Xeon/Core i7 Processor Blade
The ADLINK cPCI-A3525 Series is a 3U CompactPCI Serial compatible processor blade with SO-DIMM DDR4-2666 ECC memory up to 64GB. The ADLINK cPCI-A3525 features a 8th/9th generation Intel Core processor with Mobile Intel CM246 PCH Chipset.
The cPCI-A3525 Series is a 3U CompactPCI Serial blade available in single-slot (4HP) form factors with optional daughter boards to provide extra storage and with 2 extra GbE port throught P6 to the rear backplane. Faceplate I/O on the single slot (4HP) includes 1x DP, 2x GbE and 2x USB 3.0 ports (these I/O are common to all versions).
Serial interfaces on the backplane connectors P1 to P5 include two PCI Express x8, one PCI Express x2, two PCI Express x4, three PCI Express x1, seven SATA 6Gb/s, two USB 3.0, and eight USB 2.0 ports. Additionally, the P6 connector supports two Gigabit Ethernet interfaces.
The cPCI-A3525 is a high-performance solution for transportation, factory automation, defense and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-A3525 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and Smart Embedded Management Agent (SEMA) for system health monitoring. In addition, with multiple operating system and board support package (BSP) support, users can build a reliable and high-performance industrial system with cPCI-A3525 Series.
cPCI-3520
3U CompactPCI Intel Xeon E/ 9th Gen Intel Core Processor Blade
The ADLINK cPCI-3520 Series is a 3U CompactPCI processor blade with soldered DDR4-2666 ECC memory of up to 32GB. The ADLINK cPCI-3520 features the Intel Xeon E, 8th/9th Gen Intel Core and Intel Celeron G processor (formerly Coffee Lake-H) with Mobile Intel CM246 Chipset. (Supports ECC memory dependent on processor).
The cPCI-3520 Series is a 3U CompactPCI blade available in single-slot (4HP), dual-slot (8HP) or triple-slot (12HP) width form factors with various daughter boards to provide a broad range of I/O requirements. Faceplate I/O in the single-slot (4HP) version includes 1x DVI-I, 2x GbE and 1x USB 3.0 port (these I/O are common to all versions). Faceplate I/O in the dual-slot (8HP) version includes additional 2x USB 2.0, 1x COM, 1x KB/MS and Line-in/Line-out on the cPCI-3520D or additional 2x DisplayPorts, 1x COM in RJ-45 connector, 1x KB/MS and 1x additional USB 2.0 port on the cPCI-3520G. Two more dual-slot options are the cPCI-3520L with additional 2x GbE, 1x COM and 2x USB and the cPCI-3520M with one 100-pin high density connector supporting additional 2x DVI-D, 2x USB 2.0, 2x COM, 2x KB/MS and Line-in/Line-out ports.
Graphics support is integrated on the CPU and allows 3 independent displays on the faceplate by selecting the cPCI-3520G with additional 2x DisplayPorts. Storage includes a CFast slot, mSATA socket or a 32GB onboard SSD and 2.5″ SATA drive on the layer 2 daughter board (cPCI-3520D/L/M/P). One optional PCI 32-bit/66MHz PMC site or PCIe x1 XMC site is available on the 8HP or 12HP versions (cPCI-3520S or cPCI-3520P).
Rear I/O signals to J2 include 4x PCIe x1, 3x SATA 3 Gb/s, and 3x USB 2.0. 3x GPIO and SMBus signals are also routed to the J2 connector. The optional Rear Transition Module (RTM) provides 3x SATA, 2x GbE, 2x USB, 1x COM (Tx/Rx), and 1x VGA port.
The cPCI-3520 is a high-performance solution for factory automation and other industrial applications that require superior data transfer capability and advanced computing power. The ADLINK cPCI-3520 provides high manageability, supports Satellite mode operation as a standalone blade in peripheral slots, and IPMI for Preliminary 2 Introduction system health monitoring. A GbE port on the faceplate supports Intel AMT 9.0 for remote monitoring.
cPCI-3534/3538-S
4/8-port Asynchronous Serial Communications Modules
The cPCI-3534 is an enhanced four ports serial communication module used for Compact-PCI platform. It includes a PGA (Programmable Gate Array) to support the serial communication controller and a 37-pin connector to connect external I/O port from the front panel or using the rear IO.
The expansion cable has four standard DB25 or DB9 connectors and one DB37 connector to connect with cPCI-3534 interface card.
The cPCI-R3534 transition board can support rear I/O connection by using one DB37 connector.
The cPCI-3538 is an enhanced eight ports serial communication card used for cPCI platform. It includes a PGA (Programmable Gate Array), which supports the serial communication controller, and a 62-pin connector which connects external I/O port on the front panel or the rear I/O.
The expansion cable has eight standard DB25 connectors and one DB62 connector to connect to cPCI-3538 interface card. User may also use one DB62 to DB62 cable to connect between one cPCI-3538 and C588XB for providing 8 channel isolated RS-232/422/485 interface.
The cPCI-R3538 transition board can support rear I/O connection by using one DB62 connector.
PCI-7841/cPCI-7841
Dual-port Isolated CAN Interface Cards
The PCI-7841/cPCI-7841 is a Controller Area Network (CAN) interface card. It supports a dual-port CAN’s interface that can run independently or bridged at the same time.
The built-in CAN controller of this card is Philips SJA1000, which provides bus arbitration and error detection with auto correction and re-transmission function.
PCI-9114
32-CH 16-Bit Up to 250 kS/s Multi-Function DAQ Cards
ADLINK PCI-9114 series are 32-CH, 16-bit, high resolution multi-function DAQ Cards. The PCI-9114 device features flexible configurations on analog input.
The devices are divided into 2 kinds: normal gain version and high gain version. Both versions provide 4 programmable input ranges for bipolar and unipolar inputs. The A/D on the PCI-9114DG device features a sampling rate of 100 kS/s with resolution at 16 bits, while PCI-9114A-DG/HG device features a sampling rate of up to 250kS/s with resolution at 16 bits.
The device supports automatic analog input scanning, and offers a differential mode for 8-CH analog inputs and maximum noise elimination, as well as single-ended modes for 16- CH analog inputs. The PCI-9114 also features 1-CH 16-bit general purpose timer/counter, 16-CH TTL isolated digital inputs and 16-CH TTL isolated digital outputs.
ADLINK PCI-9114 delivers cost-effective and reliable data acquisition capabilities and is ideal for a broad variety of applications.
PCI-9113A
32-CH 12-Bit 100 kS/s Isolated Analog Input Card
ADLINK PCI-9113A is a 32-CH, 12-bit, 100 kS/s isolated analog input card.
The PCI-9113A provides analog inputs with 3 programmable input ranges for both bipolar and unipolar inputs. The 32-CH single-ended analog inputs can be converted to 16-CH differential analog inputs, which improve the noise rejection in harsh industrial environments.
The analog inputs are isolated from the PC’s system ground. This feature not only protects the PC from being damaged from surges on the signal lines, but also eliminates ground loops and common-mode problems commonly seen in industrial measurement applications.
The PCI-9113A provides custom circuit area for input signal conditioning. Either signal attenuation or filtering can be applied on per channel basis.
With all the features, ADLINK PCI-9113A delivers cost-effective and reliable data acquisition capabilities for ATE, sensor monitoring, data logging, power transmission, and a broad variety of industrial measurement applications.
PCI-9112
16-CH 12-Bit 110 kS/s Multi-Function DAQ Card
The PCI-9112 is a 12-bit, 110KHz, multifunction DAS data acquisition card. The PCI-9112 DAS card uses state-of-the-art technology, making it ideal for data logging and signal analysis applications in medicine, process control, etc.
