MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
new
cExpress-EL
COM Express Compact Size Type 6 Module with Next Generation Intel Atom Processor SoC
ADLINK cExpress-EL supports next generation Intel Atom x6000 processors (Elkhart Lake) combined with Intel UHD graphics at low power envelope and high speed interfaces. cExpress-EL modules support In-Band ECC dual channel DDR4 memory up to 32GB, and are also available in rugged operating temperature range and low power envelope, making them a perfect match for mission critical fanless edge computing applications that require safety and reliability at all times.
new
Microlog
Vehicle testing and tracking tool
The ODOS Microlog is perfectly suited for test vehicle tracking. Just plug it in and you are ready to monitor the vehicle. All is configured over the air! Perfect for any tracking and monitoring application for R&D use case as well as commercial use.
With the power of award-winning ODOS CloudSoft Professional Cloud software, you will take your test and measurement experience to another level over the air.
ODOS Microlog is a perfect tool for any vehicle testing department as you can carry out a large number of standard tests very simply with the quick installation and remote management with results being shown in real-time in ODOS Cloudsoft.
cExpress-EL
COM Express Compact Size Type 6 Module with Next Generation Intel Atom Processor SoC
ADLINK cExpress-EL supports next generation Intel Atom x6000 processors (Elkhart Lake) combined with Intel UHD graphics at low power envelope and high speed interfaces. cExpress-EL modules support In-Band ECC dual channel DDR4 memory up to 32GB, and are also available in rugged operating temperature range and low power envelope, making them a perfect match for mission critical fanless edge computing applications that require safety and reliability at all times.
new
Microlog
Vehicle testing and tracking tool
The ODOS Microlog is perfectly suited for test vehicle tracking. Just plug it in and you are ready to monitor the vehicle. All is configured over the air! Perfect for any tracking and monitoring application for R&D use case as well as commercial use.
With the power of award-winning ODOS CloudSoft Professional Cloud software, you will take your test and measurement experience to another level over the air.
ODOS Microlog is a perfect tool for any vehicle testing department as you can carry out a large number of standard tests very simply with the quick installation and remote management with results being shown in real-time in ODOS Cloudsoft.
new
CloudCommander
All-in-One CAN to Cloud datalogging solution
ODOSOLUTIONS AB (ODOS) and Kvaser AB have brought together a fresh perspective, unique collaboration, and advanced technology, in order to deliver next generation cloud connectivity and data logging for CAN (controller area network).
ODOS’ CloudCommander is a 4G-enabled data logger that integrates Kvaser’s well-known CAN interface hardware. ODOS’ Cloudsoft software platform, plus dashboard makes this a comprehensive CAN-to-Cloud data logging solution.
CloudCommander Features
The CloudCommander data logger combines the scale of Kvaser’s most popular CAN interface — the Kvaser Leaf Light — with the power of ODOS’ industry leading IoT Cloud Platform, to bring you a comprehensive CAN-to-Cloud datalogging solution:
Real-time CAN data streaming over 4G cellular connectivity to Cloud data storage
GPS tracking and 3-axis Accelerometer
Onboard UPS and memory buffer in the event of power and cellular connectivity outages
Native Kvaser Leaf (CANlib SDK) Interface and API
Rugged waterproof (IP67) field deployable enclosure with secure mounting location
CloudSoft Features
The tight vertical integration with award-winning CloudSoft platform and dashboard offers:
Remote real-time CAN data monitoring and analysis software
Over-The-Air (OTA) data-logger configuration updates
OTA Diagnostic Protocols on CAN (OBD2 & UDS)
Event based triggering to stream data, capture CAN traces and email alerts/reports
Virtual calculated CAN channels
Distributed team collaboration and data sharing platform
Plugins and REST API service
ASAM file formats
Certified to the most rigorous IT security and privacy (GDPR) legislation
What’s more, the CloudCommander incorporates a Kvaser USB-CAN interface to support your existing PC Applications whilst simultaneously streaming data to the cloud for remote fleet monitoring and diagnostics support.
new
5U Rugged Servers
Ruggedized | Scalable | Reliable
Dual Intel Xeon SP CPUs
Achieve exceptional performance with Intel Xeon Scalable Performance Silver & Gold Series processors. Up to 3.9 GHz clock rate, 22 cores (44 threads), 30.25 MB L3 cache, and 25W — 125W TDP.
Unforgettable Memory
Maximize signal integrity with 8 carefully optimized ECC RDIMMs across 6 channels and up to 1.5TB DDR4‑2933 memory.
Basically the best server-class RAM in a 5U rugged chassis.
Storage SATAsfied
Four 3.5″ drive bays supporting up to 16 SATA 6 Gb/s drives and one SlimLine Optical drive.
Lots of Slots
Comes standard with up to 18 PCIe Gen3 slots in a 5U rugged server offering the most application versatility and scalability.
Add even more PCIe slots to your ruggedized computer with our PCIe Expansion Kit.
Power. Full.
Up to 2200W of power to provide enough juice to run the most demanding application requirements with ease.
I/Options
2 - 1GbE LAN Ports (1 LAN Port with IPMI)
2 - 10GbE LAN Ports
4 - USB 3.1 Gen 1 Ports
1 - VGA Port
1 - RS-232 Serial Port
Line In/Line Out/Mic 3.5mm Jacks
Standard I/O interface can be customized to fit your specific program or application.
Components
Processor Boards
CPU
Memory
Ports & Headers
SEP8253
Dual Intel Xeon Scalable Performance
Up to 1.5 TB DDR4-2933 across 8x ECC RDIMMs (6x channels)
2x 1GbE LAN Ports (1 LAN Port with IPMI)
2x 10GbE LAN Ports
4x USB 3.1 Gen 1 Ports
1x SATA Header
1x VGA Port
1x RS-232 Serial Port
PCIe Backplanes
PCIe
Ports & Headers
HDB8259
14x Slots
4x PCIe Gen3×16
10x PCIe Gen3×8
2x USB 3.0 Gen 1 ports (via USB headers)
4x USB 2.0 ports
6x SATA/600 headers
HDB8231
18x Slots
2x PCIe Gen3×8
16x PCIe Gen3×4
2x USB 3.0 Gen 1 ports (via USB headers)
4x USB 2.0 ports
6x SATA/600 headers
HDB8237
(4x segments)
4x Slots
4x PCIe Gen3×16
2x USB 3.0 Gen 1 ports (via USB headers)
4x SATA/600 headers
Rugged Chassis
Power Supply
Drives
Size (W x H x D)
THS5095
1200W Redundant
Two 3.5″ drive bays supporting up to 6 SATA 6 Gb/s drives and one SlimLine optical drive
19″ x 8.75″ x 19.5″
48.3cm x 22.2cm x 49.5cm
THS5087
1550W N+1 or 2430W N+1
Four 3.5″ drive bays supporting up to 12 SATA 6 Gb/s drives and one SlimLine optical drive
19″ x 8.75″ x 23″
48.3cm x 22.2cm x 58.4cm
THS5090
(2 segments)
1000W Removable (2)
One 3.5″ drive bay supporting up to 3 SATA 6 Gb/s drives and one SlimLine Optical drive per segment
19″ x 8.75″ x 19.2″
48.3cm x 22.2cm x 66cm
THS5091
(4 segments)
800W Removable (4)
No drives for enhanced data security
19″ x 8.75″ x 19.2″
48.3cm x 22.2cm x 66cm
PCIe Expansion Kit
Description
PED8234
Add up to 18 PCIe slots per x16 slot in any system
with either a 1m or 3m cable.
CloudCommander
All-in-One CAN to Cloud datalogging solution
ODOSOLUTIONS AB (ODOS) and Kvaser AB have brought together a fresh perspective, unique collaboration, and advanced technology, in order to deliver next generation cloud connectivity and data logging for CAN (controller area network).
ODOS’ CloudCommander is a 4G-enabled data logger that integrates Kvaser’s well-known CAN interface hardware. ODOS’ Cloudsoft software platform, plus dashboard makes this a comprehensive CAN-to-Cloud data logging solution.
CloudCommander Features
The CloudCommander data logger combines the scale of Kvaser’s most popular CAN interface — the Kvaser Leaf Light — with the power of ODOS’ industry leading IoT Cloud Platform, to bring you a comprehensive CAN-to-Cloud datalogging solution:
Real-time CAN data streaming over 4G cellular connectivity to Cloud data storage
GPS tracking and 3-axis Accelerometer
Onboard UPS and memory buffer in the event of power and cellular connectivity outages
Native Kvaser Leaf (CANlib SDK) Interface and API
Rugged waterproof (IP67) field deployable enclosure with secure mounting location
CloudSoft Features
The tight vertical integration with award-winning CloudSoft platform and dashboard offers:
Remote real-time CAN data monitoring and analysis software
Over-The-Air (OTA) data-logger configuration updates
OTA Diagnostic Protocols on CAN (OBD2 & UDS)
Event based triggering to stream data, capture CAN traces and email alerts/reports
Virtual calculated CAN channels
Distributed team collaboration and data sharing platform
Plugins and REST API service
ASAM file formats
Certified to the most rigorous IT security and privacy (GDPR) legislation
What’s more, the CloudCommander incorporates a Kvaser USB-CAN interface to support your existing PC Applications whilst simultaneously streaming data to the cloud for remote fleet monitoring and diagnostics support.
new
5U Rugged Servers
Ruggedized | Scalable | Reliable
Dual Intel Xeon SP CPUs
Achieve exceptional performance with Intel Xeon Scalable Performance Silver & Gold Series processors. Up to 3.9 GHz clock rate, 22 cores (44 threads), 30.25 MB L3 cache, and 25W — 125W TDP.
Unforgettable Memory
Maximize signal integrity with 8 carefully optimized ECC RDIMMs across 6 channels and up to 1.5TB DDR4‑2933 memory.
Basically the best server-class RAM in a 5U rugged chassis.
Storage SATAsfied
Four 3.5″ drive bays supporting up to 16 SATA 6 Gb/s drives and one SlimLine Optical drive.
Lots of Slots
Comes standard with up to 18 PCIe Gen3 slots in a 5U rugged server offering the most application versatility and scalability.
Add even more PCIe slots to your ruggedized computer with our PCIe Expansion Kit.
Power. Full.
Up to 2200W of power to provide enough juice to run the most demanding application requirements with ease.
I/Options
2 - 1GbE LAN Ports (1 LAN Port with IPMI)
2 - 10GbE LAN Ports
4 - USB 3.1 Gen 1 Ports
1 - VGA Port
1 - RS-232 Serial Port
Line In/Line Out/Mic 3.5mm Jacks
Standard I/O interface can be customized to fit your specific program or application.
Components
Processor Boards
CPU
Memory
Ports & Headers
SEP8253
Dual Intel Xeon Scalable Performance
Up to 1.5 TB DDR4-2933 across 8x ECC RDIMMs (6x channels)
2x 1GbE LAN Ports (1 LAN Port with IPMI)
2x 10GbE LAN Ports
4x USB 3.1 Gen 1 Ports
1x SATA Header
1x VGA Port
1x RS-232 Serial Port
PCIe Backplanes
PCIe
Ports & Headers
HDB8259
14x Slots
4x PCIe Gen3×16
10x PCIe Gen3×8
2x USB 3.0 Gen 1 ports (via USB headers)
4x USB 2.0 ports
6x SATA/600 headers
HDB8231
18x Slots
2x PCIe Gen3×8
16x PCIe Gen3×4
2x USB 3.0 Gen 1 ports (via USB headers)
4x USB 2.0 ports
6x SATA/600 headers
HDB8237
(4x segments)
4x Slots
4x PCIe Gen3×16
2x USB 3.0 Gen 1 ports (via USB headers)
4x SATA/600 headers
Rugged Chassis
Power Supply
Drives
Size (W x H x D)
THS5095
1200W Redundant
Two 3.5″ drive bays supporting up to 6 SATA 6 Gb/s drives and one SlimLine optical drive
19″ x 8.75″ x 19.5″
48.3cm x 22.2cm x 49.5cm
THS5087
1550W N+1 or 2430W N+1
Four 3.5″ drive bays supporting up to 12 SATA 6 Gb/s drives and one SlimLine optical drive
19″ x 8.75″ x 23″
48.3cm x 22.2cm x 58.4cm
THS5090
(2 segments)
1000W Removable (2)
One 3.5″ drive bay supporting up to 3 SATA 6 Gb/s drives and one SlimLine Optical drive per segment
19″ x 8.75″ x 19.2″
48.3cm x 22.2cm x 66cm
THS5091
(4 segments)
800W Removable (4)
No drives for enhanced data security
19″ x 8.75″ x 19.2″
48.3cm x 22.2cm x 66cm
PCIe Expansion Kit
Description
PED8234
Add up to 18 PCIe slots per x16 slot in any system
with either a 1m or 3m cable.
new
ADLEPC-1700
Intel E3900-Series Atom, Compact Industrial PC
The ADLEPC-1700 is a rugged, compact industrial-grade computer constructed from 6063 aluminum, with thick‑walled design and a fanless, conduction-cooled CPU for industrial temperature operation. It features a durable annodized finish, flush-mounted screws, and flexible mounting options. The compact size and light weight make it ideal for a variety of industrial applications and environments, whether on the factory floor or in rugged external conditions.
Customizable High Performance
At the heart of the ADLEPC-1700 is a compact Intel Atom E3900-series SBC with a host of onboard and mPCIe expansion features. The compact chassis design has a very small footprint at only a 3.3″ x 4.6″, the approximate size of an index card, making it ideal for embedded use in IIot applications or retrofitting into high-value assets and infrastructure such as edge devices for power grid protection, oil and gas, unmanned applications, and more.
Custom I/O and Power
The EPC-1700 is highly customizable and can easily be adapted for particular customer needs including Wi-Fi, CAN, RS232, military-grade power, MIL-STD-1553, ARINC, and much more.
ADL Embedded Solutions, Inc. offers full turnkey system design services and is well versed at working collaboratively with customers to conceptualize and manufacture full custom EPC-1700 solutions or even full-custom system solutions. Contact us for details.
new
X-Analyser
Windows based tool to test your CAN, CAN FD, CANopen, J1939, NMEA2000, DeviceNet and LIN bus systems
X-Analyser Features
X-Analyser supports all of the typical features of a CAN, CAN FD, LIN analysis tool plus the following:
Simulate CAN, CAN FD & LIN Devices or Network — Message Builder for Transmission
You can build messages for transmission on a CAN, CAN FD or LIN bus from an .DBC or .LDF file. This saves time in converting decimal to hexadecimal and calculating scaling & offset. All you need to do is enter the signal physical value e.g. Engine Speed as 3000 rpm or Oil Temperature as degrees C.
CANopen
X-Analyser has support for the CANopen higher layer protocol which is used for industrial automation and other off-highway applications. There are two main areas of support for which you must have the X-Analyser Professional Edition; message/signal interpretation and transmission of Network Management messages to put individual nodes or the whole bus into different states.
NMEA 2000
The most powerful NMEA2000 test tool on the market. The NMEA2000 PGN signal database is embedded into X-Analyser which means that you can send or receive and interpret the data easily. The Fast Packet Protocol is supported for sending and receiving of NMEA2000 packets. CAN identifiers are interpreted as PGN, Source Address, Priority etc. and the data field is broken down into PGN fields and signals.
CAN Oscilloscope
X-Analyser captures CAN_H & CAN_L signals for each CAN frame on CAN bus
Can be used to carry out full CAN system audits
Help identify which ECUs or areas of CAN bus is experiencing electrical problems
Filter Editor
Use the filter editor to filter CAN frames on the Raw Data Trace they can be filtered by; Channel, Data, Data Length, Direction, Frame ID, Frame Type and Timestamp. These can be used with a combination of logic functions to define certain criteria for Filtering.
Gauges
With a CAN database loaded signals can be configured to show as gauges. With a combination of gauge styles available and gauge values can be defined such as; Min and Max values and Minor and Major Step Intervals.
Interactive Generator for CAN and J1939
The Interactive Generator (IG) allows the user to use a CANdb (*.dbc) file to interactively transmit CAN messages onto a system using the signals physical values that will automatically be converted to raw CAN data. Running in parallel with X-Analyser, the IG allows the user to create and change CAN messages on the fly. Transmission of a message can be carried out by user interaction (i.e. by clicking on a button) or by a timer with resolution 5ms which allows periodic transmitting.
ISO 15765 transmitter
Easily create a Mode 3 transmitter when the ISO 15765 Higher Layer Protocol has been added.
J1939 Signals Database
X-analyser Professional Edition comes with a J1939 database where signals can be selected and source address defined so they can be displayed in a Signals Panel, Gauge or Scope.
J1939 Signals
Within the J1939 Raw Trace tab available with X-analyser Professional CAN frames can be expanded to show the signals within that frame.
Object Transmitter
The Object Transmitter can be used to create CAN frames and transmit them onto a network. Standard and Extended ID’s can be selected, also Transmitters can be sent periodically by selecting Auto-Repeat and defining the time interval in milliseconds.
Graphing on Signals Scope
With a CAN, CAN FD or LIN database loaded, signals can be selected for the scope to displayed and plotted. Points on the scope can be selected to show the value at a certain time. The scope can also be exported to CSV format to be opened and worked with in Excel.
Signals Editor
The signals editor can be used to create parts of a CAN database on the fly, what’s created can be configure to a signals panel, gauges or scope.
Signals Panel
With a CAN database loaded signals can be configured to the signals panel to show physical values. The signals can be displayed numerically or symbolically.
Signals Search Function
CAN databases when loaded can be searched using the signals search function. Quotation marks can also be used to search for a whole name i.e. «Engine RPM».
Symbolic and Numeric Values
X-analyser can now have the same signals displayed more than once on a signals panel, gauge or scope. Within a signals panel the same signal can be displayed more than once with each as a symbolic or numeric value.
UDS DTC reader
X-analyser now has a UDS DTC reader, once configured in the transport protocol for the UDS DTC reader. It shall read and clear UDS DTC’s with the option to set the DTC Status Mask so different ECU’s can be read.
LIN Schedule Tables
When you load a LDF into X-Analyser, you can load the Schedule Table into the Object Transmitter to simulate all or some of the nodes on the LIN bus.
Supports industry standard log files and databases
X-Analyser uses industry standard files so that they can be easily shared between your engineers, customers and supplier. For description of Controller Area Networks (CAN), X-Analyser supports the CAN database file format (*.dbc). For description of Local Interconnect Networks (LIN), X-Analyser supports the LIN Description File (LDF) format (*.ldf). For logs of CAN data, X-Analyser supports log files in the ASCII file format (*.asc).
Virtual networks and channels for off-line analysis
A number of virtual buses are available with X-Analyser which are useful for off-line demonstration or working away with data captured from the CAN or LIN bus so that the data can be reviewed and played back on the PC without the need for a network interface. Virtual buses include:
Native virtual X-Analyser virtual buses that are connected in a simulated loop-back. This is ideal for play-back purposes.
Random CAN generator which generates a CAN message of ID 0×500 with a data field that contains a sine wave and a number of random signal waveforms.
Random LIN generator which generates a LIN message of ID 0×32 with a data field that contains a sine wave and a number of random signal waveforms.
Random CAN-FD generator which generates a CAN message of ID 0×500, DLC 48 with a data field that contains a sine wave and a number of random signal waveforms.
In addition to this if you are using a Kvaser or Vector interface then you can use the virtual channels that are provided by these manufacturers.
Easy Project Sharing
X-Analyser’s project files means that you can put together different setups and GUI displays for different projects, vehicles and networks.
Embedding of CAN or LIN databases into the X-Analyser projects mean easy sharing of project files without having to worry about the database linking or location.
ADLEPC-1700
Intel E3900-Series Atom, Compact Industrial PC
The ADLEPC-1700 is a rugged, compact industrial-grade computer constructed from 6063 aluminum, with thick‑walled design and a fanless, conduction-cooled CPU for industrial temperature operation. It features a durable annodized finish, flush-mounted screws, and flexible mounting options. The compact size and light weight make it ideal for a variety of industrial applications and environments, whether on the factory floor or in rugged external conditions.
Customizable High Performance
At the heart of the ADLEPC-1700 is a compact Intel Atom E3900-series SBC with a host of onboard and mPCIe expansion features. The compact chassis design has a very small footprint at only a 3.3″ x 4.6″, the approximate size of an index card, making it ideal for embedded use in IIot applications or retrofitting into high-value assets and infrastructure such as edge devices for power grid protection, oil and gas, unmanned applications, and more.
Custom I/O and Power
The EPC-1700 is highly customizable and can easily be adapted for particular customer needs including Wi-Fi, CAN, RS232, military-grade power, MIL-STD-1553, ARINC, and much more.
ADL Embedded Solutions, Inc. offers full turnkey system design services and is well versed at working collaboratively with customers to conceptualize and manufacture full custom EPC-1700 solutions or even full-custom system solutions. Contact us for details.
new
X-Analyser
Windows based tool to test your CAN, CAN FD, CANopen, J1939, NMEA2000, DeviceNet and LIN bus systems
X-Analyser Features
X-Analyser supports all of the typical features of a CAN, CAN FD, LIN analysis tool plus the following:
Simulate CAN, CAN FD & LIN Devices or Network — Message Builder for Transmission
You can build messages for transmission on a CAN, CAN FD or LIN bus from an .DBC or .LDF file. This saves time in converting decimal to hexadecimal and calculating scaling & offset. All you need to do is enter the signal physical value e.g. Engine Speed as 3000 rpm or Oil Temperature as degrees C.
CANopen
X-Analyser has support for the CANopen higher layer protocol which is used for industrial automation and other off-highway applications. There are two main areas of support for which you must have the X-Analyser Professional Edition; message/signal interpretation and transmission of Network Management messages to put individual nodes or the whole bus into different states.
NMEA 2000
The most powerful NMEA2000 test tool on the market. The NMEA2000 PGN signal database is embedded into X-Analyser which means that you can send or receive and interpret the data easily. The Fast Packet Protocol is supported for sending and receiving of NMEA2000 packets. CAN identifiers are interpreted as PGN, Source Address, Priority etc. and the data field is broken down into PGN fields and signals.
CAN Oscilloscope
X-Analyser captures CAN_H & CAN_L signals for each CAN frame on CAN bus
Can be used to carry out full CAN system audits
Help identify which ECUs or areas of CAN bus is experiencing electrical problems
Filter Editor
Use the filter editor to filter CAN frames on the Raw Data Trace they can be filtered by; Channel, Data, Data Length, Direction, Frame ID, Frame Type and Timestamp. These can be used with a combination of logic functions to define certain criteria for Filtering.
Gauges
With a CAN database loaded signals can be configured to show as gauges. With a combination of gauge styles available and gauge values can be defined such as; Min and Max values and Minor and Major Step Intervals.
Interactive Generator for CAN and J1939
The Interactive Generator (IG) allows the user to use a CANdb (*.dbc) file to interactively transmit CAN messages onto a system using the signals physical values that will automatically be converted to raw CAN data. Running in parallel with X-Analyser, the IG allows the user to create and change CAN messages on the fly. Transmission of a message can be carried out by user interaction (i.e. by clicking on a button) or by a timer with resolution 5ms which allows periodic transmitting.
ISO 15765 transmitter
Easily create a Mode 3 transmitter when the ISO 15765 Higher Layer Protocol has been added.
J1939 Signals Database
X-analyser Professional Edition comes with a J1939 database where signals can be selected and source address defined so they can be displayed in a Signals Panel, Gauge or Scope.
J1939 Signals
Within the J1939 Raw Trace tab available with X-analyser Professional CAN frames can be expanded to show the signals within that frame.
Object Transmitter
The Object Transmitter can be used to create CAN frames and transmit them onto a network. Standard and Extended ID’s can be selected, also Transmitters can be sent periodically by selecting Auto-Repeat and defining the time interval in milliseconds.
Graphing on Signals Scope
With a CAN, CAN FD or LIN database loaded, signals can be selected for the scope to displayed and plotted. Points on the scope can be selected to show the value at a certain time. The scope can also be exported to CSV format to be opened and worked with in Excel.
Signals Editor
The signals editor can be used to create parts of a CAN database on the fly, what’s created can be configure to a signals panel, gauges or scope.
Signals Panel
With a CAN database loaded signals can be configured to the signals panel to show physical values. The signals can be displayed numerically or symbolically.
Signals Search Function
CAN databases when loaded can be searched using the signals search function. Quotation marks can also be used to search for a whole name i.e. «Engine RPM».
Symbolic and Numeric Values
X-analyser can now have the same signals displayed more than once on a signals panel, gauge or scope. Within a signals panel the same signal can be displayed more than once with each as a symbolic or numeric value.
UDS DTC reader
X-analyser now has a UDS DTC reader, once configured in the transport protocol for the UDS DTC reader. It shall read and clear UDS DTC’s with the option to set the DTC Status Mask so different ECU’s can be read.
LIN Schedule Tables
When you load a LDF into X-Analyser, you can load the Schedule Table into the Object Transmitter to simulate all or some of the nodes on the LIN bus.
Supports industry standard log files and databases
X-Analyser uses industry standard files so that they can be easily shared between your engineers, customers and supplier. For description of Controller Area Networks (CAN), X-Analyser supports the CAN database file format (*.dbc). For description of Local Interconnect Networks (LIN), X-Analyser supports the LIN Description File (LDF) format (*.ldf). For logs of CAN data, X-Analyser supports log files in the ASCII file format (*.asc).
Virtual networks and channels for off-line analysis
A number of virtual buses are available with X-Analyser which are useful for off-line demonstration or working away with data captured from the CAN or LIN bus so that the data can be reviewed and played back on the PC without the need for a network interface. Virtual buses include:
Native virtual X-Analyser virtual buses that are connected in a simulated loop-back. This is ideal for play-back purposes.
Random CAN generator which generates a CAN message of ID 0×500 with a data field that contains a sine wave and a number of random signal waveforms.
Random LIN generator which generates a LIN message of ID 0×32 with a data field that contains a sine wave and a number of random signal waveforms.
Random CAN-FD generator which generates a CAN message of ID 0×500, DLC 48 with a data field that contains a sine wave and a number of random signal waveforms.
In addition to this if you are using a Kvaser or Vector interface then you can use the virtual channels that are provided by these manufacturers.
Easy Project Sharing
X-Analyser’s project files means that you can put together different setups and GUI displays for different projects, vehicles and networks.
Embedding of CAN or LIN databases into the X-Analyser projects mean easy sharing of project files without having to worry about the database linking or location.
Emerald-MM-8E/EL
PCI/104-Express 4/8-Port Serial Port Module with Opto-isolation
The Emerald-MM-8EL-XT is a family of high performance PCIe/104 «OneBank» serial I/O modules offering 4 or 8 multiprotocol serial ports with software-controlled configuration and optional opto-isolation. An accessory microcontroller manages all port configuration and provides 8 auxiliary digital / analog I/O lines for general purpose use.
The serial ports are based on a high speed PCIe octal UART with 256-byte TX/RX FIFOs and auto RS-485 transmit control. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Each port is independently isolated with an isolated power + signal chip, plus additional isolators for control signals. The board features intelligent power management that limits inrush current on power-up and also enables power-down of unused serial ports for power savings.
Opto-isolated models feature independent 2500VRMS isolation circuits for enhanced reliability in vehicle or long cable applications. All ports also feature +/-15KV ESD protection. Each serial port is available on an independent latching connector for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMM-8EL-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs.
EMM-8EL-XT also offers 8 digital/analog I/O lines which are programmable from the on-board microcontroller. Each I/O line can be configured for digital input or output. Seven of the I/O lines can be configured for 12-bit A/D input with selectable 0-2.048V or 0-3.3V input ranges.
EMM-8EL-XT contains no configuration jumpers; all configuration and control is done with an onboard microcontroller using application software included with the product. All configuration settings are stored in the microcontroller’s flash memory and are automatically loaded on power-up.
Cable Kits
Cable kits are available for both 4-port and 8-port boards They include individual cables with dB9 male connectors for each serial port and a ribbon cable for the auxiliary analog/digital I/O.
Configuration software
The EMM-8E family includes an on-board microcontroller to handle all configuration and control of the board’s features. The microcontroller is managed with a comprehensive software suite that makes configuring the EMM-8E fast and simple. A graphical control panel, a console application, and drivers for Windows and Linux are provided to enable convenient configuration of the board and control of the I/O features in a laboratory or system assembly environment, or embedded in the customer’s application software.
E104-MPE
PCI/104-Express Quad PCIe MiniCard Carrier
The PCIe MiniCard carrier provides up to four PCIe MiniCard sockets on a PCI/104-Express form factor board. All four sockets have PCIe x 1 and USB interfaces and support full size and half size PCIe MiniCard modules.
The module provides full support to all sockets while consuming only a single lane of host SBC resources. SIM card support is provided for two sockets.
All power is derived from the PCIe/104 connector 5V power tab. The PCI-104 connector provides a pass through connection and is not used by the module.
Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. For further enhanced ruggedness, zero ohm resistors can replace jumpers.
Geode-OSB
Rugged system with Nvidia Jetson AGX Orin supporting up to 8 GMSL cameras
The Geode-Osbourne computer system platform offers easy customization and quick delivery, due to its novel architecture that includes pre-integrated expansion connectors for easy addition of I/O. Geode is based on Diamond’s Osbourne carrier board for Nvidia Jetson AGX Orin. The system can support all three Orin modules: AGX Orin 32GB, AGX Orin 64GB, and Orin Industrial 64GB.
The I/O connector scheme consists of a mix of standard 38999 connectors plus dedicated SJT style connectors to support both low-speed and high-speed signals cost-effectively. In the high-speed category, Geode Osbourne supports 10Gb copper Ethernet, two USB 3.2 ports, and an HDMI port. Low-speed I/O consists of a 1Gb Ethernet port, 2 USB 2.0 ports, 2 RS-232 and 2 RS-232/422/485 serial ports, 2 CAN ports, 8 GPIO 3.3V, and Audio.
Since no two rugged computer systems are exactly alike, Geode supports up to 60 additional I/O signals and two SMA antenna connectors for I/O expansion. This enables the installation of minicard and M.2 I/O modules without requiring any change to the enclosure or cabling. The elimination of custom design and manufacturing efforts dramatically reduces up-front costs and delivery times. The resulting use of common components across multiple product configurations helps keep production costs down and facilitates the production of small quantities for pilot or small-run programs.
A GMSL camera adapter board can be installed into the system to facilitate the connection of up to 8 GMSL cameras to the system. And a rugged, isolated, wide-range-input power supply featuring MIL-STD-461, −704, and −1275 compliance can be installed as an option. The power supply and Jetson module are mounted directly to the bottom and top enclosure lids, respectively, to improve heat dissipation and keep the interior cooler for more reliable long-term operation.
Geode consists of a 3-part aluminum CNC enclosure that eliminates T joints to improve sealing. All joints and connector cutouts utilize sealing gaskets to support an IP67 rating. The Geode series was designed to meet MIL-STD-810H shock and vibration specifications.
Panel I/O Board
Geode-Osbourne’s internal architecture utilizes a direct-mount panel I/O board to eliminate most internal cables. The board contains a mix of standard 38999 and high-speed connectors to support the full range of I/O provided by the Jetson AGX Orin module and the carrier board electronics. It also includes a MIL-STD-461 filter for economical configurations where a full rugged MIL-grade power supply is not desired.
I/O Expansion
The Osbourne carrier board includes 2 minicard sockets and an M.2 E-Key socket for installing I/O and connectivity expansion modules. The Panel I/O board provides 3 connectors to bring out the I/O from installed expansion modules without requiring enclosure redesign. It has capacity for up to 60 I/O signals. Two SMA connectors are also provided on the front face of the enclosure for installed communications modules.
SabreNet-24000
Rugged 24+4 Port Ethernet Switch
SabreNet-24000 is a rugged ethernet switch intended for vehicle and other applications requiring the ability to withstand harsh environmental conditions. The design is based on Diamond's EPS-24G4X Ethernet switch with 24x 1G ports and 4x 10G SFP+ sockets. The switch runs Istax Layer 3 routing/switching embedded software featuring an impressive array of features suitable for most industrial and military applications.
The standard configuration includes the 4x 10G ports implemented with copper wiring via M12 X-coding connectors. Customer choice of fiber links can be accommodated as well. In the fiber configuration, the SFP+ Copper/RJ-45 modules are replaced with customer's choice of fiber modules with LC connections, and the I/O connectors consist of D38999 size C shells with 4 fiber termini (2 ports) per shell.
Input power range is 7-40VDC. The switch includes a power filter module providing compliance with MIL‑STD‑461‑D standards.
Embedded Software
The Istax embedded software in SabreNet-24000 provides a powerful array of features to support most embedded switch application requirements. All features are configured and managed via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port. Customer branding is available to put your logo / color scheme / part numbers on the GUI and serial interface.
The table below shows some of the more popular features included in the software:
8K MAC addresses and 4K VLANs (IEEE 802.1Q)
8K IPv4 and IPv6 multicast group support
Jumbo frame support at all speeds
Flexible link aggregation support based on Layer-2 through Layer-4 information (IEEE 802.3ad)
Multicast and broadcast storm control, as well as flooding control
Rapid Spanning Tree protocol (RSTP) and MSTP
Multiple protocol support: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s, and IEEE 802.1X
8 priorities and 8 QoS queues per port with scheduling
Hardware- and software-based IPv6 L3 static routing
RFC 2328 OSPFv2 dynamic routing
IEEE 1588 precision time protocol (PTP)
RADIUS accounting
Port and Queue policers
