MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Siemens MVB PC/104
MVB Interface Module
The MVB PC/104 is an interface module with which it is possible to connect electronic controllers to the MVB.
The user of the MVB PC/104 module is provided with API software for their development.
The MVB PC/104 connects the parallel PC/104 bus with the serial MVB. Data exchange from the MVB to the PC/104 bus and vice versa is performed via the traffic memory. Arbitration of the traffic memory is performed by the MVBCS1 ASIC.
The module is designed for use with a 16-bit CPU with ready acknowledgment. Bytewise accesses to the traffic memory are not possible because of its wordwise organization. Accesses must always be wordwise (only to even addresses).
PCE-7129
6th Generation Intel Core processor-based platform
PCE-7129/5129/5029 is a PICMG 1.3 form-factor single host board, which is designed with Intel C236 (PCE-7129), Q170 (PCE-5129), and H110 (PCE-5029) PCH for industrial applications that need high computing power and strong I/O capability.
PCE-7129/5129/5029 supports 14nm manufacturing technology, LGA1151 socket Intel Core i7/i5/i3, Pentium and Xeon processors that integrate memory and graphic controllers, and support for DDR4 2133 SDRAM up to 32 GB. Within advanced computing technology, PCE-7129/5129/5029 is suitable for processor hungry industrial applications.
PCE-7129/5129/5029 offers excellent graphics capability with its integrated Intel HD graphics core with a minimum 1 GB shared memory (requires a minimum 2GB system memory). With this, PCE-7129/5129/5029 provides strong 2D/3D graphics processing power without an additional graphic card to save extra cost, power consumption and thermal integration effort.
PCE-7129/5129/5029 features rich I/O interface: M.2 which can support M.2 (2280) type-M for both SATA3.0 (6 Gb/s) and PCIex4 (Gen3.0; 32 Gb/s) devices, SATA 3.0 ports with SW raid 0, 1, 5, 10 (PCE-5029 do not support RAID), integrated USB 3.0 controllers @ 5Gbps, 2 x RS-232 serial COM ports. Moreover, PCE-7129/5129/5029 can support Advantech PCE-5BXX and PCE-7BXX (PCE-7129 only) series backplanes offering various combinations of expansion such as PCI, PCI-X and PCIe slots.
With flexible I/O and graphic expansibility, PCE-7129/5129/5029 is an excellent, cost effective graphic or I/O oriented workstation class hardware platform. With outstanding performance and exceptional features, PCE-7129/5129/5029 is the ideal computing platform for advanced industrial applications.
CH960-CM246/QM370
COM Express Basic module
COM Express Basic module provides high-level processing performance and high-speed interfaces for a wide range of computing-demand applications such as medical and industrial automation. DFI’s Basic modules are compatible with COM Express pin-out Type 2, Type 6, and Type 7.
PFCQor
Power Factor Correction module
The PFCQor® Power Factor Correction module is an essential building block of an AC‑DC power supply. Used in conjunction with a holdup capacitor, SynQor’s DC‑DC converters and SynQor’s AC line filter, the PFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input. The module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation environments.
DXStream-HDMI
Ultra Low Latency Standalone H.264 Streaming Client
The DXStream-HDMI is an intelligent, stand-alone, ultra-low latency H.264 streaming client that receives, decodes, and displays H.264 encoded video streams. The DXStream‑HDMI supports the industry standard RTP/RTSP protocols for streaming data via the integrated 100/1000MBit Ethernet connection. This SWaP optimised solution is ideal for rapid deployment in demanding applications in Military, Communications, Transportation, Mining and Energy industries.
The DXStream-HDMI features a dedicated hardware decode engine capable of decoding up to 1080p60 H.264 video at full size and full frame-rate with Ultra Low Latency (under 60ms). The intelligent streaming client is configured via a web interface and once configured the DXStream-HDMI runs autonomously without any user interaction.
The DXStream-HDMI is an intelligent stand-alone device with it’s own on-board CPU and does not require a host CPU or any driver or OS software. For mechanical convenience, the module can be mounted on a PC/104 stack without consuming host CPU resources.
Highlights
Real-time H.264 decode at up to 1080p60
Ultra Low Latency technology with latency below 60ms
H.264/MPEG-4 AVC (Part 10) Decoder
HDMI/DVI output
RTSP/RTP streaming protocol support
Single, rugged, real-time video streaming client solution
Stand-alone operation
Web interface for configuration
Standard PC/104 mechanical form factor
Applications
All-round Real-Time Situational Awareness
Real-time video feedback from remote platforms
Unmanned vehicles (UAV, ROV)
Real-time IP video distribution
Remote Video Surveillance
Border Security
Traffic Monitoring and Control
EPS-24G2X
Managed 26-Port Gigabit Ethernet Switch with 2x 10G SFP+ Ports
The EPS-24G2X is a managed Layer 2+ Ethernet switch based on Diamond’s EPSM-10GX switch module. The switch implements all features of the EPSM-10GX, including 24 10/100/1000Mbps copper ports and 2 10Gbps SFI ports accessed via SFP+ sockets. The EPS-24G2X is designed in the industry-standard «3.5 inch» form factor. The standard cooling method is via a low-profile heat sink.
The standard Layer 2+ software embedded in the module provides a comprehensive set of Ethernet switch features suitable for a wide range of industrial applications. All features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port. A more advanced software package offering Layer 3 routing performance, as well as IEEE1588 PTP protocol and 1PPS I/O signals, is available upon request. These features are fully supported in the EPSM-10GX hardware and EPS-24G2X product.
EPS-24G2X is designed to meet the challenges of vehicle environments with its −40/+85°C operating temperature range and its MIL-STD-202G shock/vibration resistance. Latching connectors are used for all I/O for superior resistance to shock and vibration over the traditional low-cost RJ-45 style connectors. The 50% thicker PCB also aids in resistance to vibration. A wide-range input power supply with built-in transient protection provides compatibility with a range of industrial and vehicle power supplies.
EPSM-10GX
Ultra-Compact Managed 26-Port Gigabit Ethernet Switch Module
The EPSM-10GX is a managed Ethernet switch module in an ultra-compact 2.2″ x 3.3″ (55×84mm) size offering 24x 10/100/1000Mbps copper ports + 2 10Gbps SFI ports. The core Ethernet switching technology is almost fully encapsulated on the module; for many applications, only the «last inch» of magnetics and I/O connectors is required to complete the circuit, enabling easy development of custom form factor compact, rugged Ethernet switch solutions.
The small size, based on the industry-standard COM Express Mini form factor, makes EPSM-10GX a perfect choice for use as a building block for creating custom Ethernet switch solutions in a variety of space-demanding applications, such as drones, ground and underwater vehicles, and robots.
Two software packages are available, Layer 2+ switching and Layer 3 routing/switching. In addition, IEEE-1588 precision time protocol support is available with a minor modification to support an external precision clock circuit and 1pps signal source provided by the carrier board. All software features are manageable via a GUI web interface accessible over any port, as well as with a command language accessed via a built-in RS-232 port.
Two cooling accessory options are available: A heat sink provides convection cooling in a low profile, while a heat spreader provides improved conduction cooling for superior high temperature performance in applications where physical contact with the system enclosure is available.
Two high-speed fine-pitch connectors provide all power and data communications between the module and the carrier board. The first connector provides power, 9 10/100/1000 ports, the serial interface, and a serial LED data stream. Applications requiring 9 ports or less may use just this connector. The second connector contains 3 more 10/100/1000 ports, QSGMII signals for an additional 12-port PHY to provide 12 additional 10/100/1000 ports, and the 2 10G SFI ports.
EPSM-10GX is designed to meet the challenges of vehicle environments with its 50% thicker PCB, −40/+85°C operating temperature range, and MIL-STD-202G shock/vibration resistance.
cExpress-BT
COM Express Compact Size Type 6 Module with Intel Atom or Intel Celeron Processor SoC (formerly codename: Bay Trail)
The cExpress-BT is a COM ExpressR COM.0 R2.1 Type 6 module supporting the Intel Atom processor E3800 Series and Intel Celeron N2900/J1900 processor SoC (codename: Bay Trail). The cExpress-BT is specifically designed for customers who need high-level processing and graphics performance with low power consumption in a long product life solution.
The Intel Atom processor E3800 and Intel Celeron N2900/J1900 processor support non-ECC type DDR3L dual-channel memory at 1066/1333 MHz to provide excellent overall performance.
Integrated Intel Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL 1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include VGA, DDI ports supporting HDMI/DVI/DisplayPort and optional dual-channel 18/24-bit LVDS.
The cExpress-BT is specifically designed for customers with high performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time.
The cExpress-BT has dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory. In addition, an onboard miniSD card slot and onboard eMCC memory (optional, 8GB to 64GB) are supported. The cExpress-BT features a single Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
Mini PCI Express HS v2
Mini PCI Express CAN interface
The Kvaser Mini PCI Express 2xHS v2 is a small (30×51mm), yet advanced, real time CAN interface that adds one high speed CAN or CAN FD channel to any standard computer with mini PCI Express capability. PC communication is over the PCI Express system bus, making for extremely low latency with a time stamp accuracy of 1 µs.
Major Features
Fully compliant to the PCIe bus specification 1.2, Type F2 form factor (Full-Mini with bottom-side keep outs)
High-speed CAN connection (compliant with ISO 11898-2), supporting a bit rate from 50 to 1000 kbit/s for Classical CAN and up to 8Mbit/s for CAN FD
High transmission rate of up to 20000 messages/s on each channel
Time stamp accuracy of 1 µs
Galvanic isolation
Suitable for industrial environments
Low profile mini PCI Express-compliant 7-pin Molex connector provides CAN channel access
Includes Molex to DSUB9 cable adapter
Complies with EN 61000-6-2:2005, specifying EMC immunity for industrial environments
Operates over the industrial temperature range of −40 to +85°C
Kvaser’s free of charge CANLIB SDK can be used to develop software for the Mini PCI Express HS board. Windows DLL library and examples included.
Supports Windows Vista or later
Linux drivers and a dedicated SDK are available as a separate download
Support for SocketCAN, see elinux.org for details
Note: Kvaser’s already-existing Kvaser Mini PCI Express HS and Kvaser Mini PCI Express 2xHS products will remain available for sale. The primary difference is that these previous versions utilize the USB system bus for communication with the PC.
Software
Documentation, Kvaser CANlib SDK and drivers can be downloaded for free at www.kvaser.com/downloads
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Visual Basic, Python and t Script
All Kvaser CAN interface boards share the common software API, CANLib SDK. Programs written for one interface type will run without modifications on the other interface types.
J2534 Application Programming Interface available
RP1210A Application Programming Interface available
HTML-Help and online documentation in Windows and Linux
PC104+ HS/HS IDC
2-channel PC/104+ compatible CAN interface with IDC Header CAN connectors
Kvaser PC104+ HS/HS IDC is a two channel, PC/104+ compatible CAN (controller area network) interface with IDC Header CAN connectors. It includes a high-performance, on-board microcontroller for CPU offloading, ensuring fast response times.
Major Features:
Quick and easy plug-and-play installation.
High-speed ISO 11898 compliant driver circuits, supports bit rates up to 1 Mbit/s.
Compliant with the PC/104-Plus specification.
Stack-through connector.
On-board 16-bit microcontroller.
Communicates with the PC through a fast DPRAM.
Supports CAN 2.0 A and 2.0 B (active).
CAN oscillator frequency of 16 MHz.
Interfaces the CAN bus with IDC Header connectors.
Wide temperature range, −40°C — +85°C.
Software:
Documentation, software and drivers can be downloaded for free at www.kvaser.com/downloads.
Kvaser CANLIB SDK is a free resource that includes everything you need to develop software for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, and Visual Basic.
All Kvaser CAN interface boards share a common software API. Programs written for one interface type will run without modifications on the other interface types!
J2534 Application Programming Interface available.
RP1210A Application Programming Interface available.
On-line documentation in Windows HTML-Help and Adobe Acrobat format.
