MicroMax's Solutions
MicroMax's Solutions
MicroMax's Solutions
Rugged Large Screen Series
Large Screen TFT Displays
VarTech Systems offers a complete line of Large Screen LCDs for all of your industrial and digital signage monitor needs. Wide screen displays range in size from with high bright levels and high contrast ratios for sunlight readability. Each is available in wall mount, chassis mount and tabletop. The 26” and 32” models are WXGA resolution. 37", 42", 47", and 52” models are 1080p Hi-Def. Multiple video inputs are standard features.
NEMA 4X Industrial Panel PC
NEMA 4X (IP66) Panel PC Models
VarTech's versatile and highly reliable panel PCs are available in 10.4”, 15.0”, 17.0” and 19.0” LCD sizes and multiple configurations including fan-less systems. These space saving solutions are designed, produced and supported by VarTech Systems here in the USA. These are not cheaply designed re-branded products.
NEMA 4 Industrial Panel PC
NEMA 4 (IP65) Panel PC Models
VarTech's versatile and highly reliable panel PCs are available in 10.4”, 15.0”, 17.0” and 19.0” LCD sizes and multiple configurations including fan-less systems. These space saving solutions are designed, produced and supported by VarTech Systems here in the USA. These are not cheaply designed re-branded products.
Fully Enclosed Workstations and Computers
NEMA 4X Workstations and Computers
VarTech offers a complete line of NEMA 4X fully enclosed workstations and computers. These systems are engineered for the harshest conditions like factory process automation, pharmaceutical operation, process control, and other rugged workstation areas where water, dust, vibrations and extreme temperatures exist. VarTech also offers sunlight readable, high bright 15.0” and 19.0” workstations.
Complete Workstations with LCD sizes: 15.0”, 17.0”, and 19.0”.
Computers Available in 10.4”, 15.0”, 17.0”, and 19.0”.
Available Mountings: VESA /Wall, Bulkhead, Pole or Pedestal.
ADLSEC-1710
Edge-Connect L-Peripheral
The ADLSEC-1710 board is designed for convenient expansion of the ADLE3800SEC Bay Trail Atom SBC via its edge-connect architecture. The ADLE3800SEC plus ADLSEC-1710 L-peripheral combined provide a complete 3.5” SBC solution with a host of expanded features including M.2 PCIe, SATA, DVI/DP/HDMI or USB3.0, UPS option, and more.
As part of a customer product portfolio, the ADLE3800SEC and ADLSEC-1710 allows for a single processor, BIOS, firmware, and customer software across products from small, compact ADLE3800SEC solutions to more complex 3.5” sized solutions.
Applications
UAV and UUV Unmanned Systems, Industrial Control Systems, Government and Defense, Video Surveillance, Small Scale Robotics, Remote Datalogging, Man-Wearable Computing, Factory 4.0, IIoT or Cloud applications.
ADLS15PC
Embedded Single Board Computer
The ADLS15PC PC/104-Plus is based on the Intel Atom and the Intel US15W (Poulsbo) chipset. The Intel Atom is a single core processor built on a 45nm process that boasts an impressive 2.64 watts TDP. The Intel Atom delivers the benefits of genuine Intel architecture to small form factor and thermally constrained markets. The Intel US15W System Controller Hub (SCH) incorporates all functions of legacy GMCH and ICH architectures into a single die.
The ADLS15PC takes advantage of these features by delivering high performance and low thermals in a compact PC/104-Plus form factor. The Intel graphics controller drives a CRT to 1600x1200@60Hz and/or 18/24 bit LVDS LCD.
Memory is added via an SODIMM200 socket that will accept up to 2GB of DDR2-400/533 DRAM. In addition to ACPI/APM functions, EIDE, 8xUSB 2.0, 2xRS232 COM ports, PS/2 Keyboard and Mouse, LPT, AC97 Sound, 10/100/1000MBit LAN and more, the ADLS15PC also comes equipped with up to 4GB onboard SSD. Driver sets for Windows operating systems, as well as BSP's for Windows CE6 and VxWorks are available.
ADL Embedded Solutions offer very effective active and passive thermal solutions designed for this product.
ADLLAN-41000e
Quad-Port Gigabit Ethernet LAN
The ADLLAN-41000e employs the Intel i350-AM4 quad port Gigabit Ethernet controller to bring server class connectivity to PCI/104-Express. With the PCIe V2.0 interface, four Gigabit LAN ports can operate at Gigabit speed while consuming just one PCI Express lane (x1). An additional three ADLLAN-41000e boards may be used in a stack for a total of 16 available Ethernet ports, loading 4 PCIe x1 lanes. This brings true server capability to the PC/104 form factor. As expected, the ADLLAN- 41000e is also backward compatible with PCIe V1.0 signaling platforms, albeit at less than 1 Gigabit per port.
The ADLLAN-41000e also provides a maximum of two additional USB 2.0 ports via the Type 1 PCIe bus interface from the host SBC. Since the USB ports are not implemented using an independent USB controller, only two ports will be available in configurations that use more than one ADLLAN-41000e.
Applications: Mobile Server / Remote Networking, Rugged, Extended Temp., Embedded, Ethernet Surveillance, Industrial Monitoring, Network Routing.
104-PWR-512A
Embedded PC104 Power Supplies
The design incorporates a 16-bit pass through PC/104 connector, molex power input connector and voltage status LED’s. Since heat is always a factor to consider in any system design project, the DC/DC converter can be populated on either side of the board to facilitate heat sinking to one end of an enclosure, with the CPU heat sinking to the other end of the enclosure.
This triple output version can be ordered with or without a heatsink. At up to 85% efficiency, a dynamic input range and full protection on inputs and outputs, this power supply is very versatile and appropriate for many PC/104 based applications.
The Input Power Connector is a Four-pin standard Molex type connector at the edge of the board. It’s the same connector as used on a CD-ROM so it’s easy to set up and test a system with a local +12V computer power supply.
Fully software transparent, the 104-PWR-512 occupies no resources; zero I/O memory locations, IRQs, DMA channels or bandwidth of any types are consumed. Compatible with all operating systems and software.
104-PWR-500A
Wide Range DC/DC PC/104 Power Module
The design incorporates a 16-bit pass through PC/104 connector, molex type power input connector and voltage status LED’s. Since heat is always a factor to consider in any system design project, this module can be populated on either side of the board to facilitate heat sinking to one end of an enclosure, with the CPU heat sinking to the other end of the enclosure.
This single output version can be ordered with or without a heatsink. At up to 84% efficiency, a dynamic input range and full protection on inputs and outputs, this power supply is very versatile and appropriate for many PC/104 based applications.
The Input Power Connector is a Four-pin standard Molex type connector at the edge of the board. It’s the same connector as used on a CD-ROM so it’s easy to set up and test a system with a local +12V Computer type power supply.
ADLPS35ISO-150
150W 2”X4” ATX Power Supply
The ADLPS35ISO-150 board is designed to meet the needs of industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a small form factor power supply designed for −40°C to +85°C operation. Its small 2"x4″ size (50mm x 102mm) allows it to fit many space limited applications.
The ADLPS35ISO-150 provides up to 500V of galvanic isolation from dirty power and unwanted transients and is tailored to work in conjunction with ADL Embedded Solutions’ advanced high performance SBC’s with more than enough headroom for inrush startup currents, and high-power quiescent operation.
