Express-TL
Express-TL COM Express Basic Size Type 6 Module with Intel Core/Xeon/Celeron Processors ADLINK’s Express-TL COM Express Type 6 Basic size module is based on the 11th Gen Intel Core, Xeon W and Celeron 6000 processor, and is the first COM Express module to support PCI Express x16 Gen4, effectively doubling the bandwidth of previous generation COM Express modules. With a combined 8 cores, 16 threads, and up to 128GB memory, the Express-TL brings uncompromised system performance and responsiveness to your solution. Featuring brand new Gen 12 Intel UHD Graphics and Intel AVX-512 Vector Neural Network Instructions (VNNI), the Express-TL provides AI inferencing performance as much as 3X higher compared to previous generation non-VNNI platforms. The integrated Gen 12 Intel UHD Graphics core can be configured to support one 8K independent display or four 4K independent displays (HDMI/DP/eDP). In addition, legacy display interfaces such as LVDS and analog VGA are still supported as build options. Key features for today’s applications are support for 2.5 GbE and USB 3.2 with transfer rates of up to 10Gb/s that can transfer image data from cameras faster than previous generation products. Combined with 8 processor cores at 25W TDP, Intel AVX-512 VNNI, Intel OpenVINO toolkit and Intel UHD Graphics, the Express-TL is well suited for AI at the edge applications (AIoT/IoT).
Express-ADP
Express-ADP COM Express Basic Size Type 6 Module with 12th Gen Intel Core Processor ADLINK’s Express-ADP COM Express Type 6 Basic size module is based on the 12th Gen Intel Core processor and is the first COM Express module to support advanced hybrid architecture with up to 6 Performance-cores (P-cores) for IoT workloads and up to 8 Efficient-cores (E-cores) for background task management, boosting productivity and fueling IoT innovation across a wide variety of deployments. The modules provide support for PCIe 4.0 and DDR5 memory with up to 4800 MT/s combined with increased cache, as well as security and manageability features, AI enablement to deliver intelligent workload optimization, enhanced graphics, AI, computer vision, and enhanced peripheral, connectivity, and fast memory access capabilities. The integrated Intel Iris Xe graphics, with up to 96EUs, offers four concurrent 4K60 HDR displays and Intel Deep Learning Boost to deliver superior AI performance. Using DDI, eDP 1.4b and USB4/TBT4, the four independent displays support Display Alternative mode, providing premium graphics features for superior content support, display and I/O virtualization.
Express-BASE6
Express-BASE6 COM Express Type 6 Reference Carrier Board in ATX Form Factor The Express-BASE6 is an ATX size COM Express Type 6 reference carrier board. Together with the COM Express Type 6 module of your choice and off the shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification.
Express-BE
Express-BE COM Express Basic Size Type 6 Module with AMD Embedded R-Series APU The Express-BE is a COM ExpressR COM.0 R2.1 Type 6 module supporting AMD R-Series APU (codename: Bald Eagle) with A77E Fusion Controller Hub. The Express-BE is specifically designed for customers who need excellent graphics performance and high-level processing performance with low power consumption in a long product life solution. The Express-BE features AMD Bald Eagle APU supporting Heterogeneous System Architecture (HSA) and non-ECC type DDR3L dual-channel memory at 1333/1600 MHz to provide excellent overall performance. Integrated AMD Radeon™ HD 9000 Graphics includes features such as OpenGL 4.2, DirectX 11.1, OpenCL 1.2, OpenGLES 2.0, OpenCV support for H.264, MPEG2, VC1, MPEG4, WMV9, MVC hardware decode. Graphics outputs include dual-channel 18/24-bit LVDS, DDI ports supporting HDMI / DVI / DisplayPort. In addition, up to four independent displays are supported. The Express-BE is specifically designed for customers with high-performance processing and excellent graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The Express-BE has dual stacked SODIMM sockets for up to 16 GB non-ECC type DDR3L memory. In addition to the onboard integrated graphics, a multiplexed PCI ExpressR x16 Graphics bus is available for discrete graphics expansion. The Express-BE features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
Express-CFR
Express-CFR COM Express Basic Size Type 6 Module The Express-CFR is COM Express COM.0 R3.0 Basic Size Type 6 module supporting the Hexa-core (6 cores) 64-bit 9th Generation Intel Core and Xeon processor (codename «Coffeelake Refresh-H») with Mobile Intel QM370, HM370, CM246 Chipset. The Express-CFR has up to three SODIMM sockets supporting up to 96GB of DDR4 memory (two on top by default, one on bottom by build option) while still fully complying with PICMG COM.0 mechanical specifications. Modules equipped with the Xeon processor and CM246 Chipset support both ECC and non-ECC SODIMMs.
Express-CF/CFE
Express-CF/CFE COM Express Basic Size Type 6 Module The Express-CF/CFE is the first COM Express COM.0 R3.0 Basic Size Type 6 module supporting the Hexa-core (6 cores) 64-bit 8th Generation Intel Core and Xeon processor (codename «Coffeelake-H») with Mobile Intel QM370, HM370, CM246 Chipset. Whereas previous generations Intel Core i3 processors supported only dual cores with 3MB cache, the Intel Core i3-8100H is the first in its class to support 4 CPU cores with 6MB of cache. This major upgrade results in a more than 80% performance boost in MIPS (million instructions per second), and an almost doubling of memory/caching bandwidth, all at no significant cost increase compared to earlier generations. Intel Core i3 processors are widely recognized as the best valued processor and are therefore preferred in high-volume, cost-sensitive applications. They are popular choices in gaming, medical and industrial control to name a few. These Hexa-core processors support up to 12 threads (Intel Hyper-Threading Technology) as well as an impressive turbo boost of up to 4.4GHz. These combined features make the Express- CF/CFE well suited to customers who need uncompromising system performance and responsiveness in a long product life solution. The Express-CF/CFE has up to three SODIMM sockets supporting up to 48GB of DDR4 memory (two on top by default, one on bottom by build option) while still fully complying with PICMG COM.0 mechanical specifications. Modules equipped with the Xeon processor and CM246 Chipset support both ECC and non-ECC SODIMMs. Integrated Intel Generation 9 Graphics includes features such as OpenGL 4.5, DirectX 12/11, OpenCL 2.1/2.0/1.2, Intel Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA) support for full H.265/HEVC 10-bit, MPEG2 hardware codec. In addition, High Dynamic Range is supported for enhanced picture color and quality and digital content protection has been upgraded to HDCP 2.2. Graphics outputs include LVDS and three DDI ports supporting HDMI/DVI/DisplayPort and eDP/VGA as a build option. The Express-CF/CFE is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. In addition to the onboard integrated graphics, a multiplexed PCIe x16 graphics bus is available for discrete graphics expansion. Input/output features include eight PCIe Gen3 lanes that can be used for NVMe SSD and Intel Optane memory, allowing applications access to the highest speed storage solutions and include a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer.
CM5-P1000
CM5-P1000 PCIe/104 Type 1 Embedded Graphics Module with NVIDIA Quadro P1000 Being an industry-first solution, the CM5-P1000 module, expanding the company’s advanced solutions for AI-enabled mission-critical applications. Supplied in a PCIe/104 Type 1 format (measuring 116mm x 96mm), this module addresses the size, weight and power (SWaP) restrictions that aerospace and defense applications must adhere to. As an NVIDIA Elite Partner, ADLINK leverages unrivalled access to advanced processing technologies as well as the highest levels of technical support. Inclusion of an NVIDIA Quadro P1000 GPU gives this PC104 module access to 640 CUDA cores and enables 1.8TFLOPS performance levels. With 4GB of GDDR5 memory embedded, it has a 128-bit memory width and delivers a 96GB/s maximum bandwidth. The CM5-P1000 incorporates 4 ultra-high definition (UHD) DisplayPort outputs, along with a 16 lane PCIe Gen3 bus. As one of the founding companies of PC104 technology, ADLINK leveraged its deep expertise and extensive experience in the development of the new product. The CM5-P1000 module has been designed to maintain uptime in even the most challenging of working environments. It can cope with exposure to extreme temperatures, high altitudes, shocks and vibrations. An operational temperature range spanning from −40°C to +85°C is supported, and humidity levels of 96% can be withstood. It can run on either Windows 10 or 64-bit Linux operating systems. PC/104 will remain an optimum small form factor for mission-critical applications for many years to come. With its high-performance processing power, the CM5-P1000 is highly suitable for a broad spectrum of potential use cases — attending to various ground-based and airborne computing tasks. These include radars, intelligence, surveillance and reconnaissance (ISR), unmanned ground vehicles (UGV), unmanned aerial vehicles (UAV), missile systems, etc. Other areas in which it will be of value are in relation to factory automation and process control.
Express-KL/KLE
Express-KL/KLE COM Express Basic Size Type 6 Module The Express-KL/KLE is a COM Express COM.0 R2.1 Basic Size Type 6 module supporting the 64-bit 7th Generation Intel Core and Xeon processor E3 (codename «Kaby Lake‑H») with Mobile Intel QM175, HM175, CM238 Chipset. The Express-KL/KLE is specifically designed for customers who need excellent graphics performance and high-level processing performance in a long product life solution. The Express-KL/KLE features Intel Hyper-Threading Technology (up to 4 cores, 8 threads) and DDR4 dual channel memory at 2133/2400 MHz with ECC/non-ECC support determined by CPU/chipset combination to provide excellent overall performance. Intel Flexible Display Interface and Direct Media Interface provide high speed connectivity from the CPU to the Intel QM175, HM175, CM238 Chipset. Integrated Intel Generation 9 Graphics includes features such as OpenGL 4.4/4.3/4.2, DirectX 11, Intel Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA) support for full H.265/HEVC 10-bit, MPEG2 hardware codec. In addition, High Dynamic Range is supported for enhanced picture color and quality and digital content protection has been upgraded to HDCP 2.2. Graphics outputs include LVDS and three DDI ports supporting HDMI/DVI/DisplayPort and eDP as a build option. The Express-KL/KLE is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The Express-KL/KLE has dual stacked SODIMM sockets supporting up to 32 GB of DDR4 ECC/non-ECC memory. In addition to the onboard integrated graphics, a multiplexed PCIe x16 graphics bus is available for discrete graphics expansion. Input/output features include a single onboard Gigabit Ethernet port, eight PCIe x1 Gen3 lanes, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as remote console, hardware monitor, and watchdog timer.
CMx-SLx
CMx-SLx PCI/104-Express Type 1 Single Board Computer The CMx-SLx is a PCI/104-Express Type 1 Single Board Computer (SBC) featuring the 64-bit Intel 6th Core i3 processor (formerly «Skylake-H»), supported by the Intel CM236 Chipset. The CMx-SLx is specifically designed for customers who need high-level processing and graphics performance in a long product life solution. The CMx-SLx Intel processor supports Intel Hyper-Threading Technology (i3-6102E = 2 cores, 4 threads) and 8/16 GB of soldered ECC DDR4 memory at 1866/2133 to achieve optimum overall performance. Integrated Intel Generation 9 Graphics includes features such as OpenGL 5.x, OpenCL 2.x, DirectX 2015, DirectX 12, Intel Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA) support for full HEVC/VP8/VP9/AVC/MPEG2 hardware codec. Graphics outputs include single-channel 18/24-bit LVDS (eDP x4 lanes optional) and three DDI ports supporting HDMI/DVI/DisplayPort. The CMx-SLx is specifically designed for customers with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced development time. The CMx-SLx features one mini DisplayPort (DDI1), one micro HDMI port (DDI2), and one single channel 18/24-bit LVDS port (eDP), two Gigabit Ethernet ports, four USB 2.0 ports, two COM ports, eight GPIOs (from BMC), two SATA 6Gb/s ports, and one onboard SATA SSD supporting SLC (up to 32GB) and MLC (up to 64GB). The module is equipped with an SPI AMI EFI BIOS with CMOS backup, supporting embedded features such as fail safe BIOS, remote console, CMOS backup, hardware monitor, and watchdog timer. The CMx-SLx is capable of working in the temperature ranges of 0°C~60°C (standard) and −40°C~85°C (extended).
nanoX-AL
nanoX-AL COM Express Mini Size Type 10 Module The nanoX-AL is a COM Express® COM.0 R3.0 Type 10 module supporting Intel® Atom™ processor E3900 series system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optmized processing and graphics performance with low power consumption in a long product life solution. The nanoX-AL features the dual/quad core Intel® Atom™ processor E3900 series supporting non-ECC type DDR3L single-channel or dualchannel memory at 1600/1867 MHz to provide excellent overall performance. Integrated Intel® Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoX-AL is specifically designed for customers with balanced performance and power consumption requirements who want to outsource the custom core logic of their systems for reduced development time. The nanoX-AL has soldered type non-ECC DDR3L memory up to 8GB. In addition, onboard eMMC memory (8GB/16GB/32GB) and SD signals are available as build options. The nanoX-AL features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters