Sections All products
Use checkboxes for multiple choice, click a name to enter one section only.
Updating results...
Form Factors All form-factors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
Vendor All vendors
Use checkboxes for multiple choice, click a name to enter one section only.
  • Select all / Select none

Updating results...
new DXStream-HDMI DXStream-HDMI Ultra Low Latency Standalone H.264 Streaming Client The DXStream-HDMI is an intelligent, stand-alone, ultra-low latency H.264 streaming client that receives, decodes, and displays H.264 encoded video streams. The DXStream-HDMI supports the industry standard RTP/RTSP protocols for streaming data via the integrated 100/1000MBit Ethernet connection. This SWaP optimised solution is ideal for rapid deployment in demanding applications in Military, Communications, Transportation, Mining and Energy industries. The DXStream-HDMI features a dedicated hardware decode engine capable of decoding up to 1080p60 H.264 video at full size and full frame-rate with Ultra Low Latency (under 60ms). The intelligent streaming client is configured via a web interface and once configured the DXStream-HDMI runs autonomously without any user interaction. The DXStream-HDMI is an intelligent stand-alone device with it’s own on-board CPU and does not require a host CPU or any driver or OS software. For mechanical convenience, the module can be mounted on a PC/104 stack without consuming host CPU resources. Highlights Real-time H.264 decode at up to 1080p60 Ultra Low Latency technology with latency below 60ms H.264/MPEG-4 AVC (Part 10) Decoder HDMI/DVI output RTSP/RTP streaming protocol support Single, rugged, real-time video streaming client solution Stand-alone operation Web interface for configuration Standard PC/104 mechanical form factor Applications All-round Real-Time Situational Awareness Real-time video feedback from remote platforms Unmanned vehicles (UAV, ROV) Real-time IP video distribution Remote Video Surveillance Border Security Traffic Monitoring and Control cPCIS-2600 cPCIS-2600 Versatile 3U Platforms with Hot-swappable Fans and Chassis Alarm The cPCIS-2600 series is designed for demanding applications, where passive backplane PCI systems are unsuited. It is specially designed for sturdy, flexible, and versatile desktop, benchtop or 19" rackmount configuration platform. The base card cage of cPCIS-2600 provides a total 84HP (21-slot) space for 3U form factor CompactPCI or PXI modules. The space can be configured to include a 6.4" TFT LCD display, redundant modular power supply, and front or rear panel I/O access. The built-in chassis alarm module can monitor internal temperature and cooling fans status. It will alert users if the system temperature goes too high or if one fan fails. Front-access hot-swappable fan trays design makes chassis maintenance simpler and easier. The cPCIS-2600 series is the ideal platform for various test and measurement, instrumentation, traffic control, industrial automation, and mission critical applications.
COM Express Type 6 104e COM Express Type 6 104e Carrier Board Connect Tech’s COM Express® Type 6 104e is a compact carrier board which matches the dimensions of a COM Express® Basic module and offers the ultimate durability with rugged, locking pin header connectors. In addition to the option for multiple video display, on-board DisplayPort/HDMI/DVI switching, USB 3.0, dual GbE and swichable Mini-PCIe / mSATA ports a PCIe/104 Type 2 connector allows for even further 10 expansion. COM Express® Type 6 104e Carrier Board is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C. BlueStorm/Express BlueStorm/Express PCI Express The new BlueStorm/Express family offers reliable, high speed data transfer for your PCI Express system. These x1 lane, standard profile PCI Express serial cards offer two, four, eight or 16 ports of RS-232/422/485 connectivity, compatible with any PCI Express slot. Bidirectional data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. The BlueStorm/Express supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) communications of multi-drop devices. Available with optional surge suppression and DB-9 male cables, the BlueStorm/Express is backed by Connect Techs Lifetime Warranty and free technical support.
Echo/ISA Echo/ISA Serial Communications Adapter The Echo/ISA is an 8 port serial card designed for those needing continued support for ISA bus based systems. Multiple Echo boards can reside in a system to accommodate large multi-channel I/O requirements. This flexible solution enables independent configuration of each ports baud rate, parity, data and stop bits, and supports the most popular operating systems. BlueStorm/LP RS-232 BlueStorm/LP RS-232 Universal PCI The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-232 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 921.6 Kbps ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. Available with surge suppression or without and DB-9 male cables, the PCI serial cards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. Like all Connect Tech products, the BlueStorm/LP is backed by our Lifetime Warranty. The BlueStorm/LP comes in 2, 4 and 8 port RS-232 serial interface models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 serial interface models.
BlueStorm/LP RS-485 BlueStorm/LP RS-485 Universal PCI The low profile BlueStorm/LP is the perfect fit for your high density chassis or low profile PC. Fully Universal PCI 2.3 compliant, this RS-422/485 adapter can be installed in either a 3.3V or 5V system, and fits into low profile and standard height PCI computers with the change of a bracket. This enables you to connect multiple devices to your system, taking full advantage of the space saving qualities of its MD1 low profile design without sacrificing performance. Data speeds up to 1.8432 Mbps (RS-422/485) ensure your data acquisition, office automation, POS, self-service kiosk or scientific/instrumentation applications communicate in a reliable, cost-effective manner. The BlueStorm/LP supports three RS-422/485 modes: full duplex (four wire) with RTS/CTS flow control, half duplex (two wire) with auto TxD echo cancellation, and multi-drop (four wire) full duplex communications of multi-drop devices. Available with surge suppression or without and DB-9 male cables, the boards can be ordered with low profile bracket, standard sized bracket or both for the ultimate flexibility. Like all Connect Tech products, the BlueStorm/LP is backed by our Lifetime Warranty. The BlueStorm/LP comes in 2, 4 and 8 port RS-422/485 models as well as 1 plus 1, 2 plus 2, and 4 plus 4 RS-232 plus RS-422/485 models. Titan/cPCI Titan/cPCI CompactPCI Following a tradition of producing cost-effective serial cards while maintaining high performance and quality, Connect Techs Titan offers a number of features on its small, 3U CompactPCI form factor. This flexible adapter board includes 2 or 4 ports of jumper selectable RS-232 or RS-485 configuration, the option for front or rear I/O, and support for all of the most popular operating systems, including Windows XP, Windows 2000 and Windows Server 2003.
Titan/cPCI Rear I/O - Rear I/O Opto Titan/cPCI Rear I/O - Rear I/O Opto CompactPCI These robust rear panel I/O options for the Titan/cPCI are available in two 3U versions: Rear I/O and Rear I/O Opto. These reliable additions allow the convenience of rear I/O connectivity for your CompactPCI application, while maintaining high performance and reliability. Model 812 Model 812 8-Channel Frame Grabber Sensoray Model 812 is an 8-channel PCI-Express frame grabber that can simultaneously capture 8 channels of NTSC/PAL video, plus optional 8 channels of mono audio. Each video channel captures at full frame rate 30 fps (for NTSC) or 25 fps (for PAL), which results in an aggregate frame rate of up to 240 fps (for NTSC) or 200 fps (for PAL). The board implements a single-lane (x1) PCI-Express interface that enables it to be plugged into any width of PCI-Express slots. All operating power is supplied from the PCI-Express bus and no external power supply is needed. One model 812C1 cable (shown in image) is included with model 812, which can be used to connect eight video signals or eight audio signals to the board. In applications that require both audio and video inputs, an additional 812C1 cable should be purchased separately. Video All 8 composite video inputs are connected through a DB15 connector with a DB15-to-BNC breakout cable. An additional 34-pin connector can be used for breaking in the all composite video input signals as well. The video capture resolution can be chosen from D1, VGA, QVGA, CIF, 4CIF, SIF, 4SIF, etc. Captured frames could be in YUYV, UYVY, RGB555, or RGB565 formats. Audio All 8 mono audio inputs can be connected through a second DB15 connector with an optionally supplied DB15-to-BNC breakout cable. The 34-pin connector can be used for breaking-in the all audio input signals too. The audio sampling rate could be at 8K, 16K, 32K, 44.1K, or 48K Hz. Digital I/Os 8 general-purpose digital I/O (DIO) signals are provided for camera control, status indication, or alarming, etc. They can be configured to function as inputs or outputs. Software A Software Development Kit (SDK) is currently available for Linux and an SDK for Windows is coming soon. The SDKs include drivers, programming samples, and comprehensive documentation to help users/programmers to quickly start and develop custom applications using the Model 812. Applications Sensoray Model 812 is designated for video surveillance applications. However, it can be used for all other multi-channel vision, image processing, and video capturing + recording applications. With chipset supplier's expectation, all video source signals are expected from stable video sources. The board is not suitable for week video signal sources and/or switching video source applications. To get better multi-channel perview performance on PCs with an Intel shipset, a discrete (non on-motherboard) graphic video card might be needed.
Show:
Login / Registration
укажите почту
введите пароль
Forgot password?
CAPTCHA
By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy
Loading data...
Subscribe to our newsletter
specify your contacts

By clicking «#SUBMIT_NAME»,
you agree to our Privacy Policy

You have successfully subscribed
Now you can receive newsletters